PMDG 737 Autoland Tutorial In Detail|Boeing 737 ILS Cat iii Approach [1080HD]

You learn how to conduct an Autoland for the Boeing 737 NGX , For this tutorial I'll be using PMDG 737 .
Support My Channel : bit.ly/GUMFMC1
#PMDG737 #autoland
pmdg 737 ils approach tutorial; Autoland System
Microsoft flight simulator Boeing 737
#pmdg #pmdg737 #pmdg737autoland

[@pcbassy9404]

Straight, clean, excellent. Thank you!

[@zdp-189]

Another to the point, exactly what we needed to review a CAT III autoland on another MSFS airliner. Thanks again for another great video!

[@kidkokonut4581]

Definitely the best video tutorials for the 737. Thx 😄

[@juliashenandoah3965]

Very good, a quick step by step video! Thank you very much.

[@MrShroominkid]

Love it, short and simple. just how it should be

[@KmiLoa77]

Excellent, thank you so much!!

[@stefan7869]

Thanks man!

[@flightstatic4662]

Good video keep up the great work!

[@demongang3452]

Thank you soooo much, I cannot thank you enough ❤

[@thomasalex1999]

Great video. Landing Checklist after Flaps 30 always.

[@TrueBlade-1889]

Excellent... thnx !🎉🎉🎉

[@jimroberts8140]

EXCELLENT! 👏

[@kvs154]

superb!!

[@737simviator]

Great video

[@TheLeopiper]

Saludos de 🇦🇷👏🏻

[@hysmbeatz1337]

Daag ! Interesting

[@Nogapniba]

Great explanation thank you very much

[@FromStartupToShutdown]

You are welcome!

[@irishbigdan38]

Great tutorial. Subscribed

[@FromStartupToShutdown]

Awesome, thank you!

[@azib_ahmed931]

TOP TOP TOP ❤❤

[@5MilesHigh]

More detail then videos 3 times the length. Thanks!

[@benjamind1252]

Hi, super good video thanks ! It's maybe a dumb question but i reproduced what you did and the plane is not going down without vnav and not indicating LAND3 so i don't know what to do to perform autoland :/

[@quzumem]

Hey, excellent video! I would be grateful if you could clarify a doubt of mine. I was told that Land 3 only comes on aircrafts which have 3 autopilots built-in (fail operational), so how does it come on a 737 which only has 2 autopilots ( A and B )?

[@josemalbran2815]

when do u disingange the vnav or dodesit disigange by its elf on approach mode?

[@_ircghost]

Thanks! You had me chuckle with the little hand animations! Question: shouldn't you arm LOC before APP?

[@FromStartupToShutdown]

if you see that the G/S pointer is not showing on your PFD you need to start with arming LOC first then as soon as you see the G/S pointer came to view than you can arm APP Mode.

[@glynnwestwood4751]

Should prob put ALL of the details in... HGS runway length/slope on pedestal?

[@MrScott_e]

I have the latest update from PMDG and beneath the ENG 1 Display is says "NO AUTOLAND" in Yellow txt. Why? How do I fix this so I can use the Autoland feature? Thanks

[@ivanlll4985]

why wouldn't you use fmc speed?

[@louisduclos3439]

Hi ! Great tutorial. How do you know your course and NAV frequency to catch the ILS ? Do you use something out of the game ?

[@FromStartupToShutdown]

I'm using Navigraph Charts in combination with the free tool for flight planning which is called Simbrief.

[@noway9880]

Yes..also, if you slam init ref having setup a arrival via fmc-this page will tell you course, ils frequency, and wind..and your vref selected speed.

[@krekel326]

Thanks for the video, appreciate it! Question, with Autoland, at what moment exactly do you disconnect the AP and AT?

[@FromStartupToShutdown]

The Autothrottle will automatically disconnect at touchdown whereas the Autopilot needs a manual disconnection. There is no specification on when exactly to disconnect to A/P during ROLLOUT it may refer to the Company policy but you have to disconnect the A/P before exiting the RUNWAY , common sense right?.

[@Hk-uw8my]

It depends if your 737 is fail op or fail passive. A fail op 737 has electrically operated rudder actuators. In other words autopilot can control the rudder in order to maintain the centerline,it is the rollout indication on the FMA. You can leave the Ap until you re about to leave the runway. If you have a fail passive 737 which means no rudder for the autopilot, boeing recommends to disconnect the AP ASAP after touchdown.

[@FromStartupToShutdown]

@Hk416 thank you for your detailed explanation actually i forgot to mention that i was doing the Autoland in Fail OP option which means that the Autopilot has ROLLOUT control at touchdown unlike the fail passive which has no ROLLOUT available for the landing where we have to disconnect the Autopilot at touchdown.

[@FromStartupToShutdown]

actually i forgot to mention that i was doing the Autoland in Fail OP option which means that the Autopilot the has ROLLOUT control at touchdown unlike the fail passive which has no ROLLOUT available for the landing where we have to disconnect the Autopilot at touchdown.

[@frassettiguido]

Great video, How do you control the speed? You don't have n1, or speed turn on

[@FromStartupToShutdown]

Normally the speed is managed by the FMC , in this example i used the SPD INTV button to control the speed manually.

[@aldoquatela6853]

the ils doesn't hook on to me, I can't land

[@scandinavian941]

why when i want to arm cmd B, it switches off everytime after a couple of seconds?

[@FromStartupToShutdown]

That can happen for many reasons , i suggest you to watch this kzbin.info/aero/PLxEf1yYpOcvDk8mYMc2VMURX_3VBKJy0h

[@louisduclos3439]

I have another question : when i'm about to land, I open the landing gear and it disconnects me from autopilot, is it normal ?

[@FromStartupToShutdown]

No it's not normal

[@70xseven65]

So a CAT 3 autoland will only engage if the visibility is below a certain threshold?

[@FromStartupToShutdown]

CAT iii is a type of approach that we can conduct when the visibility is very low and it requires an Autoland in order to be accomplished.

[@70xseven65]

@@FromStartupToShutdown yes but I’ve tried to run an autoland in clear visibility conditions and it never engages

[@zippitydoodads9947]

Why do both computer displays have to be set?

[@FromStartupToShutdown]

Having two independent autopilots provides redundancy and improves the safety of the Autoland system. If one autopilot were to fail, the other would take over and continue the landing procedure. This redundancy also ensures that the system can operate even if there is a failure in one of the aircraft's other systems. Cheers

[@ZenScent9er]

Whenever I’m coming in on the approach, LAND 3 never engages? What do I do?

[@FromStartupToShutdown]

you need to configure your PMDG MCP to Fail Operational mode watch this video to understand that kzbin.info/www/bejne/jJKUnWVvfb52kJo

[@M.b18]

For some reason i dont get the word “rollout” it only says “flare”. Can someone help please?

[@FromStartupToShutdown]

All you need is to change the Autoland mode of operation from Fail Passive to Fail Operational using your FMC CDU .For more clarification on that watch this video that explains in detail your issue : kzbin.info/www/bejne/kJTIdauuetOVqsk

[@M.b18]

@@FromStartupToShutdown thank you!!

[@kantaittk1187]

Will it have auto flare ?

[@FromStartupToShutdown]

yes

[@Tyleraviator99]

is it out yet?

[@FromStartupToShutdown]

It's coming soon , it's on Beta testing phase .

[@specialneedsmolester1957]

I follow the tutorial but both ap won’t connect it just changes sides

[@Aviator738]

Do not press the A/P button on the MCP, press the autopilot disconnect button twice which is over the yoke

[@SDGRTX1455]

Cockpit needs a texture upgrade if this for msfs

[@flightstatic4662]

its not msfs its P3D not fs2020

[@Aviator738]

@@flightstatic4662 this is FSX.

[@flightstatic4662]

@@Aviator738meh p3d is based off of fsx doesn't really matter, hard to tell the difference

[@Aviator738]

@@flightstatic4662 i know, and you can just look to the runway, runway lights, ground textures and texture quality of the cockpit here in the video

[@flightstatic4662]

@@Aviator738 i'm sorry that i offended you by mis identifying sims that look very similar

[@josh0018]

What mod is this?

[@FromStartupToShutdown]

PMDG 737..

[@jacksorrows6553]

you should probably clarify what sim this is. Doesn't look like msfs

[@Nogapniba]

Nobody said it’s msfs

[@Nogapniba]

He is making a video about auto land onpmbd aircraf

[@CMDRRustyDog]

Microsoft Flight Simulator is mentioned in the video descrption though. So who knows.

[@Nogapniba]

@@CMDRRustyDog it’s a FSX

[@amateurdraw9524]

The lighting and textures look too bad to be from msfs, likely fsx or p3dv5.

[@jcbak]

Not a fan of the arm. I hope that can be turned off.