🔧Pocophone F2 Display Screen Replacement📲😎

Presenting Poco F2 with pleasure for You...
My equipment:
◉Glass cutting wire: bit.ly/3GiwqkH
◉Heat plate (glass separator): bit.ly/3hNAe47
◉UV Lamp: bit.ly/3GiVLLw
◉Glass cutting machine: bit.ly/3PTnTaU
◉Glue remover: bit.ly/3Vid6YZ
◉Small autoclave (bubble remover): bit.ly/3hX7WUC
◉Big autoclave: bit.ly/3GdQTHj
◉360° Separator: bit.ly/3Gr6409
➥Our service official website: jerrymobile.pl
Join my page👍
/ jerrymobilepl
Subscribe for more videos 😎
Comment if You have a questions 😊
Thank You💜
MUSIC:
EMWU - FREEDOM
• emwu - freedom

[@jacksparrow5921]

Be more careful when removing the usb C port board and always always remove the sim tray first. To be a technician you are very clumsy, you have to treat phones with sweetness, with delicacy.

[@victorpepe7569]

Genial 👍👌

[@Bramski15]

hey! thanks for your video. I would like to ask if its possible to use the display of k30 ultra instead of the k30 pro ones.

[@ahmadkamal8273]

Thank you for the guide. just Changed the screen from My phone

[@lancer4456]

Obrigado por deixar o link do display original, é tão difícil encontrar no Brasil

[@smokestackpatrick]

Thank you for the Video. What is the liquid you apply on the fingerprint sensor wir the cloth before installing the Display panel?

[@afiq8146]

alcohol

[@jeromepestano9785]

hi the fingger print is still okay after the lcd is replacement?

[@fabtel2162]

Hi, thanks for your tutorial. My Display works finde, but there are mandy scratches in the screen. Is there a chance just to replace the glass?

[@ilikecringe]

big nope

[@danrezky37]

Hello Nice video! Can i screenshot your video for make skin at my poco? Thankyou

[@danicacatibay5083]

Where can i buy those replacement lcd?

[@ArifHidayatmcfc]

thnks

[@akismpagias3075]

Hello bro where did u buy the screen i am looking to buy too for my broken poco

[@titorecord91]

plz did you get an original screen ? where to by online ?

[@joetaro69]

Hi. What's the liquid you use to open the phone with your car please ?

[@disturbator]

Please link for glue remover? Or i s it just an motor with a rod?

[@joetaro69]

What's the liquid you use at 3'45 please ?

[@aldok1869]

لو سمحت كنت عاوز اركب باغه ل موبايل سامسونج j5.2016 عاوز اعرف بكام وعنوان حضرتك فين

[@pagolmon2091]

Vai dukan koi apnar

[@joetaro69]

Hi i cut the fingerprint connector on the frame. Is it easy to remove the old and replace it please ?

[@Halb07]

Alguien en Colombia que pueda hacer el cambio? o al menos ubicar el repuesto?

[@joetaro69]

Is it hard to change the frame plz ?

[@joetaro69]

It s working ! Is it normal i have play between the screen and the frame ? Thanks

[@joetaro69]

Help please

[@olayinkaolatunde3028]

1. Please how can I get an original 1:1 screen replacement for Poco F3? Kindly help with link if possible. 2. I feel it’s just my front glass that needs replacement, can that be done as opposed to getting a whole new screen? Thanks

[@dgm778]

the screen is good than the original ones?

[@titorecord91]

Plzzzz where to pay an full original screen for my Poco F2 pro :( .... online store

[@demimasa_Q103]

I think it better for you to explain what are you doing instead you just play a background music IF you really want to teach us. But if you dont want to teach us, this video is good to watch.

[@JerryMobilePL]

I understand You. But 13 minutes is too long to talk about temperature, wire thickness and lamination pressure 😁 If You have any question please tell me, I will answer soon 😉

[@Hichamdsaber]

Where can i buy that screen to replace my broken one

[@zues121510]

Aliexpress

[@edzioevil]

4:07 what is it, rubber part ? I don't know where to put in again.

[@Davelife-ww1ql]

One question, I have a little f2, with the screen broken, when I connect the charger the charging led lights up, but if I press the power button it does not charge or anything, it is normal, if I change the screen it will start or will be another problem ? thanks

[@Kraxt0n]

You need to pull the back off, had this problem on 1 of two poco f2 pros. The connector at the bottom where the speaker is, that's the root cause of the problem. You need a piece of thin plastic like a sim card cut in a small piece about as big as the ribbon connector itself. Solved my issue now the phone charges. But still needing a digi and screen as well as two back glasses.

[@Superchoco25ESP]

@@Kraxt0n Did you do that repairment and it always work? I have to put pressure to charge mine just on top of where ends the main flex that crosses the battery. I see it's very common with F2 pro, what kind of adhesive did you use to secure the back? I'm thinking about change the flex or the charging module idk

[@Kraxt0n]

@@Superchoco25ESP i cant recall "the repair" but i did however put a small piece of plastic inside to hold pressure there and never had the issue again (until my girl busted both mine and her devices) mi 11 now lol but your issue should be solvable if i recall as what this vid is about by doing what they do. the ribbon cable was at fault with mine.

[@Superchoco25ESP]

@@Kraxt0n Yes, many people are solving the issue by putting something to hold pressure at the bottom end of the ribbon cable. Were your phone only charge when putting "manually" some pressure at the same point but over the screen (before "the repair" lol)

[@Kraxt0n]

@@Superchoco25ESP I think your asking if applying pressure there made mine charge? If so, kinda...not always but sometimes it worked. Sometimes it did not. Thus why I heated up the back and fixed the issue the best way I knew how.

[@jebajose]

I want to repair pocco f2 pro. Please assist

[@victorcarter5754]

hello. What type/brand of adhesive do you use to secure the lcd to the frame? Thank uou

[@victorcarter5754]

Question answered, this time I paused the video att he right place and got the details. Very good demo, staightforward and clear . ThANKS AGAIN

[@danrezky37]

Hello im sorry i just use your video screenshot for my poco f2 phone skin

[@joetaro69]

Hi, My fingerprint doesn't work.. i can add my fingerprint but cannot open the phone with it. Screen is working and it's tactile but it won't open my phone

[@themani1698]

the glue (t-7000) is also used for the phone cover ?

[@user-on4bj2tr8f]

How much does the the work with the screen cost?

[@JerryMobilePL]

This model 50$

[@user-on4bj2tr8f]

@@JerryMobilePL just work? Is the screen original?

[@joetaro69]

Hi i tried like you to connect the screen, it's not switching on. Nothing appear. Do you have an idea please ? I see the red led blinking or fix so it is loading. But the screen doesn't work. Do you think it's the screen or something else i have broken in the phone ? Thanks

[@JerryMobilePL]

Hi 😁 problem can be the connector on the motherboard. One line dead and it wouldn't work. Try second lcd, if will be the same need to service motherboard..

[@joetaro69]

@@JerryMobilePL thank you. Strange screen switched on !!! But the buttons don't really work, now i see the screen as if it was off ( with time) buttons doesn't switch it on but i see time. i have a little bit of rubber i don't know where it goes !!

[@saitama4068]

hi can k30 ultra 120hz display fit in this poco f2 pro?

[@JerryMobilePL]

Sorry but I'm not sure, I can't help 😏

[@milanpetrovic9803]

where does the rubber part go? 4:07

[@joetaro69]

I have b 7000 glue and i have never done that... I find strange that there is a little square transluscent in the middle of the screen....

[@jimz9343]

that's the optical fingerprint sensor

[@joetaro69]

@@jimz9343 yes thank you !

[@joetaro69]

Hi my phone keep on switching on after i changed the screen plus the frame. Do you know what can it be please ?

[@JerryMobilePL]

If You changed the screen and frame, it's a problem with frame. Please check if power/volume flex is ok 😉

[@joetaro69]

@@JerryMobilePL thanks for your answer. Finally it asked me to delete everything, so i did it. But still the pb. So i choose to reinstall everything. Now the phone is working. The fingerprint sensor is not working though. I tried to calibrate but the black part is not working. 1515 brightness instable last line : KB calibration test failed. I read pple did thing with twrp but i think i don't have it and i don't have an opened bootloader. I also already brick a mi max so i am not doint it since. I thing there are roms for chinese and other for westerns. My poco f2 pro is chinese with custom rom i guess. It was already made when i bought it and i don't want to install a rom or things that would break it. Edit : i have no sound when i make a call but loudspeaker is ok. Do you have an idea please ?!

[@joetaro69]

Hi i opened my phone again because it stopped charging. I think it's because it had been hot and the chatterton moved. Now the vibration doesn't work, it only make a scratch sound. Do you know what to do please ?

[@chokac1]

Flex cable is damaged. It is connecting charging port and motherboard

[@joetaro69]

@@chokac1 thank you, eveything is so fragile inside, it doesn't charge again... i am waitinfg for a new flex cable but the last one was a copy and very bad quality... And i broke my screen again...

[@elipurniadi5437]

Saya juga mahu tukar LCD

[@Kraxt0n]

You have nothing for poco f2 pro on your store

[@cudielkurdi8401]

السلام عليكم ورحمة الله وبركاته👋🏻 انا اسم هاتفي (Poco xiaomi F2 pro) اشتريتو من من الانترنت قبل ٩ أشهر، فجأة الجوال ما بقى يشحن عم احطو في الشحن ما عم يصير وكان فيه ٥٢% شحن وبعد يومان طفى الجوال صرت احطو من جديد في الشحن بيطلع بس إشارة البطارة انو طافي وبعدها ما بقى يطلع شي قفل، بعدين بعد فترة حطيتو في الشحن صار يطلع بس ضوء احمر من عند الكاميرا وصوت، سألت على محلات كثيرة في السويد قالوا لي هذا فكينه غيرنا الشاشة و البطارة و مكان الشحن ما عم يشتغل وكمان قطع ثانية غيروها ما صار أبدا ياريت اعرف شو الحل الجوال الان جنب وطافي كامل ما بيشتغل وجديد والله اشتريتو بس ليش صار هيك ما اعرف اتمنى عمو تخبرني شو اساوي شو المشكلة يلي فيه اتمنى احد يرد علي شكرا🙏🏻🙏🏻🤲🏻🤲🏻 😪😪

[@joetaro69]

I broke my screen again ....