POI Point of interest DJI M30 series

[@MDFire150]

Great tip. I hadn't found that feature yet. Gonna have to play with it. Have you found a way to manually add a POI, and then have the drone fly to that? i.e., you have a last known lat/long and you want the drone to go there, how would you manually enter a lat/long and have the drone fly to it?

[@SPEDRONE-jv6vo]

good job !

[@wibbyarief8958]

Hi there! Is it still possible to adjust the gimbal while using POI mode? For example, we put the pinpoint at the tower base, so we could navigate circling the tower easily while we look around the using gimbal

[@windsoraerialdronephotography]

good job Mike, how do you turn nite mode off and on (so that you still maintain color)

[@usardroneteam]

Go to the camera settings under video and the starlight settings are there to set from Auto/on/off Turn it to off.

[@PhilPinkerton]

Question from New bee can POI be set when planning a waypoint mission and take a snapshot of the POI at each waypoint?

[@usardroneteam]

Sorry for the delayed reply. You can certainly take a snapshot but not sure why. Did you want to do an orbit at each waypoint? If so that wouldn't work while enroute.

[@soupeyyy9253]

Thx!

[@NEVS08]

Hi, what Software Version do you use? On my Screen there is only the "Smart Track" Button on the left side under the Laser Icon. If i add a Pin Point its not possible to do this Orbit Mode.

[@usardroneteam]

Did you do the latest firmware update? Update v09.01.00.06. 2024-02-22.

[@arthurgotz5677]

What are your C1 and C2 buttons programmed for?

[@NEVS08]

​@@usardroneteam Thanks, I checked the version and it was already installed. I reinstalled the update via DJI Assistant and now it works.

[@usardroneteam]

They can be programed any way you want but for the POI function, they go into default override as gimbal lock C2 and rotation, left or right, C1.@@arthurgotz5677