Polaris ATV power steering install

[@TierischUnter]

Great! I installed my EPS yesterday, asking me which wire (of speed-sensor connector r/w/b) to connect to the blue one. Looked at your video and bingo. Thanks for the information.

[@spk07csl57]

immensely helpful. Thank you very much.

[@Maddenfoot24]

Is it possible to remove power steering? From sportsman 570 217

[@billyjohnston6657]

Put this same unit on my 2016 Polaris 570 sportsman ES 4x4 and after getting all back together, I noticed my handlebars were cocked left a little? Aligned it and took it for a drive. Noticed it turns left real good left but when I turn right it is not as tight of a turn? I think my front wheels were not perfectly straight as should have been when I stabbed my top shaft? Don't make the same mistake or you will be pulling it apart again to repair!

[@huntingtime713]

Where do you plug in the power steering charger on 2018 Polaris

[@GWAYGWAY1]

I fitted a universal kit from the makers in China, I fitted it to my CECTEK as it had very heavy steering when backing a Trailer. It appears to work and the little light glows OK. BUT the effort it gives is not really noticeable and really pathetic. The voltage it seems MUST be over 12.7 Volts or it does give anything worth having.

[@450rmaniac]

Great video! I am thinking, based on the amount of lighting, you're afraid of the dark...

[@urakas]

We love night riding and some of the trails we ride are pretty hairy. We can use as much light as possible.

[@cheapocheapo9014]

this unit is a universal fit all with a fabrication team on hand. simply stated!

[@jensroder]

Hello, I would like to install on my polaris 800 sportsman efi 2008. Question: did I understand right, that I need a connection to the speed sensor? My sensor is defect. My speed control does not work. Thanks Greeting Dirk

[@cheapocheapo9014]

Did you have A problem with the gas tank petcock? i ground down motor the tank itself fits but the petcock butts up against the motor

[@zachcooper2759]

Great video!

[@1000BlackHeart0001]

hello robert just want to ask you how happy are you with the power steering kit? please let me know if it is worth the money... I have big tires on my atv and to turn them you have to have lunch before =) thanks

[@urakas]

Love it. I use to only be able to ride for an hours before my shoulders would start hurting. Now I ride all weekend 100+ miles and no issue. Also works great while show plowing. Definitely worth the money. I wish I would have done it sooner !!!!!

[@urakas]

Just make sure that your gas tank isn't rubbing on the Power steering motor.

[@1000BlackHeart0001]

thank you Robert for your reply...

[@madmudder2434]

Marcio americano Year or more later; have you had any problems?

[@cheapocheapo9956]

I am in mud and water frequently , works great,only problem is would not fit without grinding on the steering box to make it fit without hitting the gas tank,also i took out the radiator and mounted up on top with a rad relocation kit. made the installation much easier

[@bigl4201]

did you have to drill pilot holes into the frame for the motor and box?

[@ricardo3761]

Congratulations !!!! I would like to install one of these on my Honda Fourtrax 420 year 2015 !!! But I can't get any tutorial on the subject, will you help me? thank you !!! hug...

[@Smodlee]

They need to make actual bolt of kits for all atvs with no power steering

[@deanholston8147]

Bob, great video watched it 3 times already. I am told by SuperATV that this will not fit the carb model 500HO. Can you tell me how much space you have on yours between the gas tank and the center of the mounting hole for the motor on the frame. It appears to be the same as mine and I may have to grind the motor as well for it to fit. Thanks. Dean

[@cheapocheapo9956]

I installed this on my 08 500 HO carb machine . the only way I got it to fit was a radiator relocation kit and then install the power steering motor turned in the opposite direction (180 degrees ) along with the mounting bracket

[@deanholston8147]

@@cheapocheapo9956 Thank you. I actually called tech support at SuperATV, and they assured me it would fit my year model. We will see.

[@stevew4302]

DEAN HOLSTON Did you ever end up getting the kit installed? I have 2010 500HO and saw the kits are only listed for the EFI models. I assumed it was due to clearance issues, and your post seems to confirm that.

[@keithspencer8510]

Hey Rob, wondering how the kit has been holding up. Any major issues over the past couple years. Thanks.

[@cheapocheapo9956]

im not Rob (cheapo cheapo) i installed this on mu 0-7 sportsman about a year ago and it been perfect better than expected

[@madmudder2434]

Hey Robert, just came across your video and wondering if you would know if this kit would fit in the 2018 Highlifter? :/

[@urakas]

This kit won't but the same company makes models for just about every utv and atv

[@kirdude3647]

Can you put this on 2019 450 ho??

[@concealit4800]

Does it affect ur charging system at all?

[@cheapocheapo9014]

No it does not affect the charging system, works very well. The electrical is the easy part

[@cheapocheapo9014]

how will you change your inner tie rods ? remove the power steering ? not a very accurate video

[@easytiger555]

where is going the blus wire please? TY

[@easytiger555]

i've got a black, a red (- and +), a white and a blue... TY

[@robwoulfe3624]

The blue wire is the speed control. You'll need to connect it to the wire wire that plugs into the speedometer. You can see on Minute 9:20 on the video

[@lindalavoie2228]

peut on avoir ce vidéo en français ?