Polaris IQR Mountain Mod 800 Ep #17, Wiring, hoses, panels, PowerModz!

[@LB7Mikey]

Are you going to put a sled wrap on it? It'll look sweet for the magazines!! Please don't wack a bunch of stickers on it

[@YatziukiProductions]

Don't rush perfection!

[@Bohdiezz]

The sled is looking pretty sick!

[@mikes5412]

Thats impressive all from a sled tore down to nothing wow

[@jakesiemers6578]

If i have ever seen a sled that needs a turbo this is the one. It is already so custom you might as well just throw in a turbo if you have any room. If not have jaws make a twin pipe

[@jacobr.oliver3110]

The REV Killer!

[@cameronpaquette4721]

nice build love the iqr just a question what do you yous for your editing cuz i cant find a good one love the vids CrabbyPants1

[@PowerModzOfficial]

final cut pro

[@cameronpaquette4721]

k thank you

[@stevewilson3993]

Will the IQR be ready before the season is over?

[@TheBCSledder]

Careful blocking your exhaust valves. All the un-burnt oil drains out the solenoid into the belly pan to keep the exhaust valves from clogging up. This isn't from personal experience it's what the mechanic at my dealer said, and it sort of made sense.

[@Stevenwiizzz]

need to take the elka suspension off and put some fox on there... you have next to no travel, you'll hit a big snow drift or something its gonna bottom right out.. No good.. Love the sled though keep up the good work

[@PowerModzOfficial]

cant have a narrow stance and lots of travel - no matter what kind of shock you use:) Thanks for watching!

[@Stevenwiizzz]

whats the stance on that sled? I have 40" or 39" on my 2012 M800 and the travel on it is crazy

[@PowerModzOfficial]

Stevenwiizzz the stance is 36 inches:)

[@metalmulisha963]

they robbed your carbs of parts..cold blooded haha

[@aspenyukon6845]

Remove the exhaust valve n pipe plug the hole...raise the timing...sled will run 130mph

[@juss-passin-thru]

Lookin Gooooood!!

[@canadianlifeeh5089]

Must be nice to have an air riveter I re did everyone of those rivets today by hand

[@PowerModzOfficial]

I used to do by hand - destroyed my hands lol

[@RICHIE_RICH89]

That sledds sweet when are you doing the yahmaha exciter mod

[@CrispyRust]

u broke the hood :O by the strap! huhu

[@cypresshill3932]

U seem like a Hitman ....

[@angandbj]

you should do a short track mod

[@PowerModzOfficial]

next season two 136 or 144 mods to start off.

[@Stevenwiizzz]

and is that the same type of track on the Polaris Pro RMK 155 Assault??

[@ThatGoalsHQ]

Hew Louie, how much does this usely cost to customize and fully make a sled from scratch, like ur rev or this iqr???

[@theredneckridersscootergro9551]

Im going to say 10-20 thousand and it depends if you use the best stuff or less quality of parta

[@sandchar]

i dont get why you put mest over your sled if it cant run in snow it aint no good

[@Gloggen98]

Can't get the picture :(

[@RICHIE_RICH89]

How much hp are you getting

[@hummuqtuq]

Are those carbs heated? Any advantages or disadvantages to heated carbs?

[@BrowerBandit]

with heated carbs you snow machine becomes more fuel efficent because with warmer gas the less you need to burn in the engine.

[@PowerModzOfficial]

carb heaters are good in very cold environments, they can freeze up and stick open. most of the time it's not needed.

[@ildkild]

how much has this project cost u, over or under 50k?

[@PowerModzOfficial]

under

[@MrDigsd]

PowerModz Was this sled like over 15k?

[@sledheaddan2927]

where are ur lights gonna be?

[@PackRat558]

I kind of have a felling he will not but lights on and i think he might attach an aftermarket led not sure though...

[@PowerModzOfficial]

PackRat558 still trying to figure that out! probably LED from Nextech - insanely bright.

[@sledheaddan2927]

nice nice

[@jeremyanthony4989]

Funny how he spent thousands of dollars creating an awesome sled but he didn't get a nicer looking seat

[@bruinsfan988]

why would you build a mountain snowmobile when you can just buy a pro rmk and it would probably be better than that sled and cheaper

[@PowerModzOfficial]

ever build anything yourself? Custom? Thanks for watching!

[@bruinsfan988]

ya i have its a pain in the ass its not as reliable its a lot easier to go to a dealership and buy one.

[@MrDigsd]

bruinsfan988 Because when you build it from the ground up, it feels like your sled, not Polaris'. Just put 'Louie' decals on the sled and take polaris' off!

[@yamahamm]

Because when you by a sled it's a sled made to fit all riders, when you build it yourself you can build it to fit you and your riding style/skills. And you know how too fix things when they break. And yea if you don't break stuff you are not riding hard enough.

[@TheBIGfatGUT]

first

[@sxscustom]

my question is.... U spend all that time and tons of real dollars...for the real person and have a machine that still doesn't handle as well as a assault 155. U would be better off just buying a ready to go sled. IQR are great for racing and ditch banging. all the science and technology is made for that. not mountains.

[@AdBul_]

well yeah its not only to get the sled... now he knows pretty much everything on it and he can proudly say he has built it from ground up. and then there is that no-one has the same thing that he does.