Polaris Scrambler XP 1000 S 55" - RJWC Dual Mud Edition

One of the best exhaust systems on the market hands down!
Find your next exhaust here!
Visit: www.ncbperform...
Exhaust/Parts questions? 👇
Email: [e-mail] or text 315-530-2512
Grow Your Channel Via tube buddy!
www.tubebuddy....
Equipment Used In This Video:
GoPro: amzn.to/38LPdCX
GoPro Chin Mount: amzn.to/3o1vk17
Helmet: amzn.to/3pBv1L4
Gloves: amzn.to/38Gk5oq
Waders: amzn.to/3hEgECZ
Drone: amzn.to/2JwS8a8
Camera: amzn.to/3pvnmhd
Phone: amzn.to/3aS09S5
Handlebar: amzn.to/3osNRDH
Risers: amzn.to/2Xov14P
#polarisoffroad #polarissportsman1000 #superatv #highlifter #csttires #rjwc #gopro #gatorwaders #venomwaders #mudding #mudlife #tallpinesatvpark #Polarisrebuild #merica #RJWC #polarissportsman #msawheelsd #polarisoffroad #polarisorv #DJI #monsenmaskin #ATV #CanAm #X3 #fullsend #awesome #friends #polarisorv #steering fix #maintenance #atvlife #2020scrambler1000s #Scrambler1000 #newtonfallsatvpokerrun

[@polpowermetoo4531]

Video could have been 5 minutes long not 15. Cool end result tho.

[@NorthCountryBoyz]

Could have been, but I have to have some fun, make everyone a little part of the image/fun. Little advertising for my buddy at Fun Unlimited, little real life look into the install of it all, little real life of walking into the shop/humor we share, and then end result. Definitely a great product, always appreciate comments, and criticism...especially if you did like something about it 😎🤘 Thanks for stopping, dropping, and supporting!

[@leedimatteo5078]

thats a slipon correct? do they require tuning for slipons? sounds mint!!

[@NorthCountryBoyz]

That is just a slip. Full is not truly needed for the Polaris from the OEM setup for any gains. Tuning is always highly recommended for any exhaust. Before I sell to any customer I make sure to go through the reasons. Also all of my machines with exhausts are tuned purposely for the same reason. 👊🏼💪🏼

[@leedimatteo5078]

@@NorthCountryBoyz i def want the slipon but how can i get tuned? do you have a fuel box or can i send you my ecu?

[@kcatv9556]

Yeah buddy nice and loud! Some nice drive-by shots!! Looks like you’re getting that machine just the way you want it.

[@NorthCountryBoyz]

If she doesn't scream....trade her in. It's faulty. Slowly, but, surely. Still much more to go! The STM Primary and Secondary arrive tomorrow! I feel like a little kid going to Disney for the first time! Once the snorkels, clutches, and rad kit are in place...it will be time to really put her to work just the way I see it. Appreciate you stopping in, I know it must be tough with retirement, though the good thing with that? The very moment I know I can get a chance to get that way, I know for sure I can follow you for a ride, and damnit....I can finally see the wife busting your balls in person! 😎

[@octalsnippage]

Fail. Should have put the dual Krossflow on. Sound and look way better than the mud edition. I will upload my video and link so you can see. kzbin.info/www/bejne/n3yaYXlrobOfedk That’s a vid from my buddies go pro chasing me with the Krossflow.

[@NorthCountryBoyz]

Mine is the Mud Edition with the Krossflow internals...02:46 I mention the different internal setup. I just didn't clarify what it was completely as I wasn't quite sure of the setup for customers...also a dealer for RJWC so I wanted to see for myself if the setup was something I wanted/didn't want to market to customers. I am with you on this setup, as having the Krossflow setup with the Mud Edition body, truly the way to go!

[@everythingoutdoors7544]

That machine is an absolute BEAST!! Looks great and sounds awesome. Keep the videos comin'.....👍

[@NorthCountryBoyz]

Paul, fairly new name that I can see! I try to keep track of names I don't see often! Love this machine like none-other! I just can't wait to get her completely built! Definitely appreciate the support!

[@Wayne-vb8bj]

I didn't realize I wasn't subscribed to your channel... but I fixed that! Good videos & quality products.

[@NorthCountryBoyz]

Hi Wayne! I appreciate the kind words and support! I am starting to get a lot more of that now with the business. Customers sometimes are blown away when they find out the NCB in NCB Performance is for North Country Boyz. Which then answers the question why we haven't been getting any videos out since a while now. This business definitely demands a great deal of time to maintain everything...hopefully I can get back to editing someday. Hope all is well and if you ever have any parts or product questions? Feel free to call the business number from www.ncbperformance.com or shoot me over an email [e-mail]

[@Wayne-vb8bj]

@@NorthCountryBoyz It's all coming together Brother! Just stay focused. As soon as I'm healed from this shoulder surgery and back at work, I'll be in touch about those handlebars & assembly stuff. Gotta wait till the time is right.

[@ADVENTURESThisWay]

You know...they put instructions in the box for a reason...but it does sound so sweet

[@NorthCountryBoyz]

Yeah, Yeah, Yeah....I don't want to hear it! LOL. I got a little side-tracked with the install...too many people talking around me, then I forgot Andreas told me, "you need to remove that bracket", and thing went downhill from there! lol. The only thing I do know? The borders need to open up! As we need to do a damn ride together!!!! 😎

[@sage_hyper8200]

I got The rjwc exhaust on my scrambler too

[@NorthCountryBoyz]

Best exhaust on the market. I just switched it out to the APX...taking it to get ceramic coated tomorrow. Probably should get back to making videos but the business keeps me too dang busy. lol

[@bratuadrian5529]

did you put EFI TUNER also or is working without?

[@XMR-Queen]

Hey I have the same bike , I was thinking about putting some 28x10x12 terminator tire on it, do you thing I will be fine we the stock clutching or I would need to add a clutch kitt thanks you!!!

[@NorthCountryBoyz]

With the 28x10x12 you should still be fairly safe. Clutching is always a benefit, with that I would go with the QSC clutch kit, it is fairly priced and will give you the gains needed for the tire change from stock. Thanks for dropping in 🤘

[@XMR-Queen]

I'm also looking to buy a snorkel kit , do you know where I can find one ?? Thanks 🤪

[@stacyreid5077]

Great sound nice and throaty yet not crazy loud so as to disturb people, I can’t stand it when at a several day ride and while I’m trying to sleep people are riding around the camps with super loud pipes

[@NorthCountryBoyz]

The Krossflow's, they offer a lower DCB with lower speeds, but once you get on them...they open right up. That is one good thing about them. They give you the option to be somewhat quiet but also loud when you want to be. I myself, I love loud, but there is a point in which you need to respect the peace. :-)

[@stacyreid5077]

@@NorthCountryBoyz believe me I know loud, I had a full sized 1979 Chevy Blazer with the removable roof which I had it built for show and go plus had a custom soft top built for it which really let the deep throaty melodies for the hollowed out side pipes in. Picture a built sm block Chevy with headers doing a 90* turn and then another 90* in 3” pipe into some 3-1/2” side pipes. It was so deep and loud that when I idled past store windows they rattled and my parents lived on a river 3 miles outta town could here me coming home when I’d hit the passing gear and 4 barrel when I got to the city limits. And ya don’t want me to tell ya about the stereo I had in it

[@XMR_King]

sounds wicked 👍🏼 I put a single on my HL next will be the duels on my scrammy, the look and sound of RJWC is the best IMO, and all the cool stickers!!

[@NorthCountryBoyz]

Apologies I am just catching this! Things have been a little crazy on the flip side of YT. Definitely appreciate you dropping in with a comment. Hey, when you are ready...just give me a shout. I will get you setup good and proper if you don't already have a goto for exhaust 🤘

[@XMR_King]

@@NorthCountryBoyz no problem bud I’m thinking since I’m in Canada it would be hard to beat the crew at Dirty Life after duty and all that stuff

[@NorthCountryBoyz]

@@XMR_King I am all about supporting local. I have done a ride with Trevor from Dirty Life...great guy! If what you are doing can support him, then I am all about it, but if there are things he can't get...I am here. I live just across the border, my number 1 focus is keeping things 100% the way they should be.

[@RIDERSSOUL24]

😍🔥🔥😎💪👍

[@tiltz1000]

hey trevor what do use to clean ur rjwc ..mines lookin a lil tainted

[@NorthCountryBoyz]

Holla! I actually used the NAPA Aluminum spray to clean them up. Spray, them down, ley it sit for about 30 seconds, and quickly spray them down. I am no expert on what to use, I did it on a "hunch", and it worked well.

[@780Aleks-AB]

Ah who really needs instructions anyways 😆 sounds and looks good. Imagine how loud it'll be once the packing is worn out haha.

[@NorthCountryBoyz]

I mean....seriously, instructions are for amateurs! F the packing, I am swapping out the Krossflow setup for the Mud Edition, and then wait for the packing to wear out! Just like my Sportsman 😎 I need to send RVS a message, "you need to make a tune for worn packing" because I don't want packing, I want straight pipe sound and action! LMAO!

[@780Aleks-AB]

@@NorthCountryBoyz Well my old HMF pipe was basically a straight pipe and then the packing went bye bye after a while. And my ears hurt after a longer ride. Prepare to wear hearing protection inside your helmet.

[@NorthCountryBoyz]

@@780Aleks-AB I already do with my Sportsman. I put my ear buds in, takes care of everything, but it does mess with my talking on camera a bit. lol. Then again, so does the exhaust on the Sportsman, as it is basically a straight pipe now. Who needs packing anyway?! LMAO

[@jimmerharvey806]

“He’s Tearing up the dam lawn!”😂😂

[@NorthCountryBoyz]

Some-BISH! LMAO! Did sound super sweeeeeet though! Lawns need "aeration" anyway 😎 Just tell her the grass will be greener than every before.

[@jimmerharvey806]

Yup just tilling it up for a garden is all🤠

[@NorthCountryBoyz]

@@jimmerharvey806 EXACTLY!!!!! Got to plants you some vegetables now! LMAO! Let's just hope 2021 has us living closer...Halle and Kamarie will be going to group sessions together...talking about what they have gotten themselves into! 😂

[@jimmerharvey806]

You ain’t shitting😂

[@NorthCountryBoyz]

@@jimmerharvey806 Wait until we get some true Garage time once I move that way 😎 Then we will really have what is going on! Get the smoker going, beers pouring, and imaginations rolling...Halle will not know what to do! As well as Kamarie. lol

[@2ATVSANDOURLIFE]

Sounds great for a Can Am lol j/k it does sound great

[@NorthCountryBoyz]

Oh you stop that nonsense down there! LOL. It does sound great, we just need to get you two on board with a twin! Whether 850 or 1000! Something about that sound, it just brings the "kid" out of you, and is simply FUN! I hope all is well in your direction, a direction I am hoping to get in soon, as I am tired of being tied up in NYS! I need some Southern, Virginian, not NYS love! 😎

[@2ATVSANDOURLIFE]

@@NorthCountryBoyz Yeah I'm ready to go anywhere but here but scared until we see what's going to happen after the 20th in case everything gets shut back down

[@matthewmueller1202]

Do you have to put a tune on the four wheeler if you put this exhaust on?

[@NorthCountryBoyz]

You "don't" but it is definitely recommended for the best results as well as warranty. I tested mine out with 500 miles without a tune, I found I was running too rich, and so now I have the tune going in her. You don't want to run too rich/lean, so the best thing is to go tune, bypass the fuel controller, and do things right from the start.

[@texasadam4236]

How’s it handling in the thick ass mud?

[@NorthCountryBoyz]

It's...well...working on it. lol. I haven't really given it the "beans" per se. I have attempted some "low & slow" crawls (snorkels aren't on yet) and it didn't work out so great. I should have the snorkels on this weekend, new clutches as well, and from there the rad kit. Not having the rad kit on yet has been the biggest reason I have taken it easy, as most of the rides where mud has been, I am just asking to clog up the radiator and slow down the fun for everyone. 2021 will be the true testing season for the new girl, luckily I still have the old girl, so she has been doing the dirty work. Though, with covid, a hot summer, mud was actually somewhat limited compared to previous seasons. Appreciate the support, comment, and dropping in man

[@WIGSPLITTERSRC]

sounds killer bro

[@NorthCountryBoyz]

Love the RJWC exhausts. There are many great comparable exhausts out there. Though, none can really compare when it comes to quality, longevity, and performance. Appreciates ya stopping in! Been a great supporter of many videos! I know I don't always get to comments, but I do get some views in!

[@dukeboyzpowersports]

That sounds real dirty bud and when I say dirty, I mean awesome 👍👍

[@NorthCountryBoyz]

New name I haven't seen! Much appreciated, just sent a sub your way as well, keeping this love of the hobby alive is everything 🤘 RJWC, I can't deny, even if I didn't sell their products I would still be supporting them. Yes, you pay a lot more than other exhausts, but you get what you pay for! I haven't had a chance to look through videos, though from what I can see from a quick scan, you guys out of the Great White North?

[@dukeboyzpowersports]

@@NorthCountryBoyz I just changed the name of my channel, used to be dutchrudder films, but wasn’t liking the name. It didn’t really have anything to do atvs or street bikes or my new ride. Stay tuned to see what I bought. Happy trails bud 👍👍

[@NorthCountryBoyz]

@@dukeboyzpowersports NO SHIT! Man, I am WAAAAAAY behind on things in the YT world. My views, comments, and support of everyone dropped down beyond imagination. Since covid hit, we have been basically nonstop for work, I can barely get things out there I want to get out. Things are starting to slowly settle down a bit now! Time to play some catch-up where I can. I hope all is going well on your end! 🤘

[@dukeboyzpowersports]

@@NorthCountryBoyz yeah it’s pretty much the same here. Been working a lot since the lockdown last March. Things are starting to slow down, but only cause of parts problems, so I’m probably going to be working a lot after they figure that one out, dam COVID lol. You would think with everyone at home yt would be just exploding, but I guess if your at home, your layed off or loss your job and can’t afford the simple luxuries of life. Hopefully this virus clears up soon, so we can get back to riding more lol. Here’s to hoping 🍻🍻. Stay safe bud 👍👍

[@chrishondacm]

Love the sound of this exhaust think il be changing mine soon but limited to choice in the uk

[@NorthCountryBoyz]

I am not familiar with UK rules/regulations, you are actually the first from the UK I have heard from, but I am sure we can make something happen. If you want, shoot me a PM on FB, Coy Hunter Brunet. If I can't help you out, one of my friends within Europe most likely can, but some more information will be needed. Appreciate the dropping in and love 🤙

[@chrishondacm]

@@NorthCountryBoyz excellent keep the awesome videos coming 👍

[@chrishondacm]

@@NorthCountryBoyz iam not on fb but iam on Instagram and just followed your page

[@NorthCountryBoyz]

@@chrishondacm Who are you under on there? I don't always catch follows on there as it only gives me so many notifications before I lose seeing who followed/commented/liked/etc.

[@PolarisScramblerBoy]

Hi man, what have you on atv, exhaust and which other pieces? Thanks

[@NorthCountryBoyz]

Exhaust is the RJWC dual mud edition outer with the krossflow innter, KMC wheels, Assassinator tires, and STM clutches. Much more is in the works for this girl as time goes on. Fasstcompany handlebars, ROX risers, SATV Snorkels, and PlateauFab Rad relocate is coming soon! 💪🤘

[@PolarisScramblerBoy]

@@NorthCountryBoyz ecu nothing??

[@NorthCountryBoyz]

@@PolarisScramblerBoy RVS Performance tune just went in her today. I may have had a few beers in me while commenting. lol. My multitasking is getting worse with age. lmao

[@PolarisScramblerBoy]

@@NorthCountryBoyz hahhahaha good bro, i haveto but mine is completely stock, i just start now to tune him, but I'm in Italy, here isn't culture of atv

[@NorthCountryBoyz]

@@PolarisScramblerBoy someday maybe 😎 the sport is becoming more and more popular 🤟🏼. Funny story? The direct ecu tuning equipment for RVS is out of Italy 😳

[@cdholmes241]

Nice.

[@NorthCountryBoyz]

Definitely beats "stock exhausts" that is for sure! It just depends on if you want "loud" or "semi loud" for what you choose for RJWC options.

[@Rod1011000]

✊🏽✊🏽✊🏽

[@NorthCountryBoyz]

I know that name! I know that name wants some RJWC's and some STM clutching as well! Don't be hiding on me ROD!

[@Rod1011000]

@@NorthCountryBoyz coming soon, and only buying from you bro ✊🏽✊🏽✊🏽

[@NorthCountryBoyz]

@@Rod1011000 You best your beautiful ass! LOL. Don't forget...there is something special for you 🤘😎