Pole Lathe Turned Elm Plates - Now available

  Рет қаралды 639

Jones Trees & Treen

Jones Trees & Treen

Күн бұрын

Пікірлер: 7
@TheHandToolery
@TheHandToolery 2 жыл бұрын
They look great! Love you work!
@jones_trees_and_treen
@jones_trees_and_treen 2 жыл бұрын
Thanks!
@goingdurden967
@goingdurden967 2 жыл бұрын
question: how do you get such a clean finish? My plates and bowls always end up a bit fuzzy, no matter how sharp are my tools and how hard and dense the wood is.
@jones_trees_and_treen
@jones_trees_and_treen 2 жыл бұрын
I made a video on how I turn plates similar to this one, you might find it helpful. It's hard to say what your issue is without seeing you turn and looking at your tools. I will say, I used to think my hooks were sharp, then later on I realised they really weren't. Sometimes there is one dull spot that does the majority of the turning, so you need to check that every point along the edge has been addressed, and often. I sharpen several times per bowl / plate nowadays.
@jones_trees_and_treen
@jones_trees_and_treen 2 жыл бұрын
It can also just be the wood. Some timbers are naturally fuzzy.
@verdigrissirgidrev4152
@verdigrissirgidrev4152 2 жыл бұрын
apply oil with brush, wipe of excess with rag. that way 90% of oil wont end up in rag.
@jones_trees_and_treen
@jones_trees_and_treen 2 жыл бұрын
These plates really soak it up, I tried a few different ways, just didn't include all of them.
How I turn Quaichs on the pole lathe - Greenwoodworking
12:17
Jones Trees & Treen
Рет қаралды 7 М.
Turning a plum-wood bowl on my pole lathe - full process | Greenwoodworking
15:38
Human vs Jet Engine
00:19
MrBeast
Рет қаралды 162 МЛН
小丑揭穿坏人的阴谋 #小丑 #天使 #shorts
00:35
好人小丑
Рет қаралды 22 МЛН
Osman Kalyoncu Sonu Üzücü Saddest Videos Dream Engine 275 #shorts
00:29
Pole lathe: Turning a Simple Wooden Plate
11:17
Jones Trees & Treen
Рет қаралды 4,7 М.
Greenwoodworking - 10 Tips to Improve your Carving Axe Technique
13:16
Jones Trees & Treen
Рет қаралды 19 М.
Building Schwarz's "Herculaneum" Low Roman Workbench
23:53
Jones Trees & Treen
Рет қаралды 32 М.
Pole Lathe Turning - small avocado wood bowl - green woodworking
25:19
Jones Trees & Treen
Рет қаралды 763
Do Wood Treatments Really Work? UNEXPECTED RESULTS
14:17
Rag 'n' Bone Brown
Рет қаралды 926 М.
How I handle a Mora 106 carving / sloyd blade - updated method
9:30
Jones Trees & Treen
Рет қаралды 15 М.
The Client Sent My Sculpture Back... DESTROYED
17:11
BM Sculptures
Рет қаралды 1,9 МЛН
How I make an Axe Block / Carving Stump for Green Woodworking
7:20
Jones Trees & Treen
Рет қаралды 20 М.
Human vs Jet Engine
00:19
MrBeast
Рет қаралды 162 МЛН