Is it weird that after I watch these videos I walk around all day sing the polishing turds song.
@realgoodatdoinstuff9002 жыл бұрын
I think it's totally normal.
@given0fox968 Жыл бұрын
This dude deserves a Nobel Peace Prize for the logic he drops starting at 9:04
@dirtlump10 ай бұрын
Yessir ! We've gone back to Stones in our CK10 as well. And the same 4 stone grit procedure as yours.... with basically no load coupla strokes on each of the last two just for plateau finish.... the Dyno don't lie !
@lukelikens20572 жыл бұрын
Love the name of your channel and the intro music
@chuckjenkins19682 жыл бұрын
If Pete would've been my teacher in high school I'd liked it a lot better. Well done Mr Harrell
@YouCantSawSawdust Жыл бұрын
I would really like to meet,and spend some time with,people that make comments such as the one you have just submitted. Just to analyse your character and psychological make up.
@rickfinsta29512 жыл бұрын
Great video! I make torque plates for a living (CCA Racing Products) and many of my customers are running the old Sunnen hones even at the highest levels of motorsports. Some of the newer machines have automation benefits but they aren't making better holes than well-maintained old iron like that Sunnen.
@davidgriggs37212 жыл бұрын
I appreciate y’all’s sarcasm! It is refreshing to all of us that have a f&cking clue about making sh!t fast!
@jonathanlawson46672 жыл бұрын
Awesome video guys
@frankensteincreations4740 Жыл бұрын
Love the simplicity, yet it’s a complicated process… One of the best engine building KZbin channels there is. If I were closer to NC I’d be having you do my engines hands down. 👍🤘👏
@DebieKaspari-mp8fc Жыл бұрын
Shipping is cheap
@benrossbach65012 жыл бұрын
Appreciate your time and knowledge
@brandoncarpenter46372 жыл бұрын
that sunnen has been polishing winning turds from day one lol I'd be proud of it too that's pretty cool thanks for sharing keep up the good work
@edsmachine932 жыл бұрын
Your old CK10 still does a great job. There is a reason the called them the"Cylinder King"! Great content. Thank you, EM.
@jdias512 жыл бұрын
For such a young channel overall your videos are top notch, you seem so comfortable behind the camera and are able to speak without having a bunch of cuts or rambling on Pete your the man
@philiphunsucker18722 жыл бұрын
Good work Pete! Enjoying the videos. Special Rocks are RAD! 😂
@flipfloptanlines9262 жыл бұрын
Polishing Turds is the best mini-series ever made! Way better than that FRIENDS horsesh*t. Right up there with Sopranos.....
@mattmanyam2 жыл бұрын
Kevin sent me. Second vid... I'll be sticking around.
@johnpowell60042 жыл бұрын
Love your content. No BS, just the facts. Really appreciated you comparing engine and chassis Dyno info prior to teardown. Don't much care for the peak numbers. I care about the before and after comparison though. Thank you for taking the time to share what you've learned with all of us.
@leprechaungarage2 жыл бұрын
Great videos , it’s nice to see how it’s done properly !
@foghornleghorn8536 Жыл бұрын
Thanks Pete for going to all the trouble to make these videos.
@stevebeavers37542 жыл бұрын
Awesome stuff! I learned a lot.
@rudyhollis65402 жыл бұрын
These are my type of videos, be really neat to see the whole process!!!!
@herbhagstrom36222 жыл бұрын
Thank you sir
@kevin_nagle2 жыл бұрын
Another great episode. Today I learned that honing oil & rocks are expensive, and I learned a new word.. ubiquitous. Tomorrows challenge will be using ubiquitous in a sentence. Looking forward to the next episode & Im really hoping for another episode of MCTBs!! 🤙🏼🤘🏼🤪🤘🏼🤙🏼
@jeffyoung20892 жыл бұрын
Thanks!
@timrayburn24612 жыл бұрын
Thanks
@littlemotor4142 жыл бұрын
Love it! Thanks for doin’ this Pete!!!
@realgoodatdoinstuff9002 жыл бұрын
No problem bud
@brucefrye8799 Жыл бұрын
Pete bud I've been going back through this series of videos hoping to see if I've missed something that you're trying to teach me. But I've got to tell you man I really like you tone you've got on the guitar sounds awesome
@thesquirrelchroniclesakare78082 жыл бұрын
Thanks Pete
@Mattvardaman2 жыл бұрын
Awesome music man! Made me laugh.
@rockyriverracing14292 жыл бұрын
I just want to go on record and say..you’re basically a living legend Pete, I had a buddy get a fox tuned by you, way back when you were in the og shop. And you guys were doing some amazing things with the original LSs… aka sbf
@BlytheLifeRacing2 жыл бұрын
Rock on.
@jheibeck60592 жыл бұрын
Awesome video
@BEYTEK2 ай бұрын
super informative dude thanks
@derekalexander56912 жыл бұрын
The music reminds me of Dokken. Love the videos guys keep it up.
@HotRodDave2 жыл бұрын
Polishing Turds World Tour Coming Soon
@davidgough7382 Жыл бұрын
word of the day: ubiquitous :-)
@sidejobspeedshop87612 жыл бұрын
Proud rock user lol
@nextgen1939 Жыл бұрын
Ck-10 and cv-616 are good machines from sunnen. I had a cv-616 and just went to the sunnen sv-10. The only thing that is really different is the sv-10 will dwell on its on when you get to a tight spot. The newer machines are really set up for production or to cut down on labor. Your machine is nice and it does the job.
@alexlove25886 ай бұрын
Nice line hone...
@johnkrag69 ай бұрын
Can't beat a CK10! You may want to install the Jamison Dwell Control on it.......
@benstrait3332 жыл бұрын
You're not just paying for the stones and oil, you're paying for the expertise. Your other option is a dingle ball and hope for the best😉🤣🤣🤣
@JohnW1711stock Жыл бұрын
Someday I will find the individual that started the rumor saying racing could be cheap! LOL!! Cheap engines are not fast, and fast engines are not cheap!
@BCzepa Жыл бұрын
david vizard says that when removing weight its better to take it off the profile of the counterweight to streamline it, and that in general it doesnt matter too much to maintain the shape i think thats cause you have the rest of the weight following through anyhow. this will stop oil from hitting the counterweights with as much force too, helping with vibration
@compt3ck2 жыл бұрын
Really... A, B, C & D stones will never work! Everyone knows that. That thing is gonna blow on the dyno for sure. JK thanks for the build series.
@cliffbeckwith40192 жыл бұрын
When I was younger I worked at a shop that would hot hone blocks, run hot water through the block while honing. I wonder if its still done?
@philipmazzuca22692 жыл бұрын
You don’t use the head gasket under the plate? Iron plate for iron heads? Aluminum plate for aluminum heads? BHJ makes both correct?
@realgoodatdoinstuff9002 жыл бұрын
Nope. I think all thats mostly a waste of time.
@philipmazzuca22692 жыл бұрын
Thanks Pete
@outlawdart2 жыл бұрын
Enjoy your videos. Are you rotating the stones so they wear evenly, or are you dressing them? Just curious and couldn't tell what you was doing.
@juliahobbick46042 жыл бұрын
When you seen him pull the stones off he scrubbed them on themselves dressing them selves
@realgoodatdoinstuff9002 жыл бұрын
Yes both.
@stevenbelue54962 жыл бұрын
@@realgoodatdoinstuff900 something I'm wondering about, using a hone to go .010 over is there a chance of getting the cylinder out of square? Like if the last shop got them off a little with the .030 overbore. I was watching Jim's Auto Machine and they was using a boring bar and you could see where the tooling wasn't touching down and he said the last overbore they probably didn't have the block squarely located . I guess what I'm asking the boring bar locates the cylinder squarely to the centerline and decks whereas with a hone does it just follow the hole that's already there?
@dungvuanh36347 ай бұрын
Hello friend.. I see there are many tools used to polish cylinders, but some only have 2 stones, the other 2 sides are 2 felt pieces, these 2 felt pieces are effective. What, please explain to me
@mrmiscast2 жыл бұрын
Was there a betting pool for HP increase? Damn I missed it, didn't I....
@robertoudokrapf4538 ай бұрын
OLÁ. 12/12/23. Assisti seu vídeo referente a Brunimento de cilindro. A precisão exigida no Brunimento de cilindros RETIFICADOS não permite o uso de braço superior "oscilante" nem de brunidores "manuais". (CONSIDERO UM ERRO DE PROJETO DA MÁQUINA). ABRAÇOS... Roberto Udo Krapf
@b.c4066 Жыл бұрын
Do you use the same head gasket and studs that will be used in the final assembly when you bolt the torque plate on?
@jacksonbermingham21682 жыл бұрын
have you ever done lifter coating?
@Brooks3362 жыл бұрын
Not that you're making money off of youtube with the ads start putting a video out at least once a week so they keep paying you or they push your channel to the bottom of the list.
@jameshendricks15422 жыл бұрын
How many cylinders can you hone before wearing out the stones and honing/cutting oil before they need to be replaced ?
@kularace73512 жыл бұрын
Do you bolt the main caps before honing as well?
@t.s.racing2 жыл бұрын
Yes always, torqued to spec. A bar goes through the main saddles to hold the block to the machine. T.S. RACING
@deanwilliamson1373 Жыл бұрын
I have heard other notable engine builders get all hot and bothered about the angle of the cross hatch. Do you alter this on your engines?
@trevermonk8575 Жыл бұрын
Are you plateau honing? Is that final hone?
@MountaineerGarage2 жыл бұрын
First lol
@liamchannel3711 ай бұрын
Do you ever measure the surface finish?
@realgoodatdoinstuff90011 ай бұрын
Yes with my finger
@Flitzer5142 жыл бұрын
What rings do you like, 1.2mm or 1.5mm?
@LibertySpam Жыл бұрын
Get those commie measurements outta here. We measure the stupid way, inches!
@YouCantSawSawdust Жыл бұрын
You are using the WRONG final honing stone. You should have used stone E instead of a stone D. Amature mistake.
@boostedperformance4529 Жыл бұрын
what's better for a small block for turbo engine longer rod or less compression height or do you want a smaller rod and more compression height? I'm building a small block Ford Speedmaster Max block 9.750 deck height bore 4.155 with 4 in stroke crank with Cleveland mains and I was shooting for 11.1 or 11.5.1 compression ratio.what would be better ? and the motor will be Turbo on E85 on the street and methanol at the track.and you want a bigger cc combustion chamber? I was thinking about running the trick flow 240cchighport head SbF any info on this would be huge because you're the man and you do great work and you're awesome teacher.