Polycarbonate Recorder

No video

Polycarbonate Recorder

Рет қаралды 23,581

Gijs Gieskes

Күн бұрын

gieskes.nl/unde...

Пікірлер: 32

@jamesslick4790 6 жыл бұрын

Finally a use for for the 4,000,000 AOL CDs I got in the mail in the 1990s!

@DaniDogenigt 11 жыл бұрын

So nice to see you put it up! I really want to try and build one myself! Thanks for a lovely workshop at DIEM - this is Daniel with the floppy drive and arduino sequencer/sampler. ;)

@gerryroberts662 7 жыл бұрын

every time i watch one of these, the sound quality is impared, but this one sound pretty good...

@NakagawaGakki 11 жыл бұрын

Superb. Always an inspiration. Always ground breaking, you are the master.

@michalekxtreme 7 жыл бұрын

Nice work. but i think Diamond Stylus could be better. ordinary needle can't cut high sounds. You using to big speaker ( i think it was bass speaker) I prefer using coil from tweter or using mid-range speaker from old TV. Right now I started my lathe project. i have a box of blank vinyl disc. Direct drive turntable ( Technics ) and parts from old printer ( paint cartridge slider ) for driving the cutting arm. Sory for my bad english.

@k333ization 10 жыл бұрын

I'm a fan of vinyl records, and I'm also trying to build a homemade phonograph engraver.The head recorder that you see in the video, it is difficult to build?

@LHUPA 8 жыл бұрын

Awesome project! Which stylus you use? I'm presently building one and I use a Staedtler compass stylus! Did you carve your stylus yourself to get one like studios? Congrats! Thanks for sharing!

@gijs 8 жыл бұрын

+LHUPA i made one from sowing needle. not so good..

@guitarslf132 9 жыл бұрын

Do the two screws at the bottom of the cutter head fix it to that golden strip? If so, how does this not kill the sound transfer? Or is it on a bearing

@hewrecbizman 7 жыл бұрын

One thing i learned it also has to do with, is that todays turntables don't have a corrective EQ circuit adjust for that,, so that's where records have to but cut with with an EQ curve having all the low frequencies turned down quite enough and all the high frequencies all set quite a bit higher than normal. Then when played back on todays turntable the frequencies will play back all sounding at normal levels. Any pereson building their own machine to cut their own records, will have to do some experimenting with that, in order to find exactly how ,how much lower to set the low frequencies and exactly how much higher to set all the mid range and high frequencies A real good needle on turntable also does help in putting out all the high frequencies..

@snerttt 9 ай бұрын

Teenage engineering has a website that does it for you

@JackOfAllTrades2022 7 жыл бұрын

Are you embossing or cutting? What are you using for a cutting needle.. looks like a regular phonograph needle.

@otherunicorn 10 жыл бұрын

Finally, a new use for all those bad CDs.

@theremim 5 жыл бұрын

Hello, could you tell me how your process of moving the needle arm is? I noticed that you use a bearing system, but I did not understand where the engine goes and the reduction.