Husqvarna 543xp muffler mod and test

Testing ported muffler on 543xp
#543xpMufflerMod #Husqvarna543xp #543xp

[@brettblack7049]

Runs well. Looks like your chain was perfect! I've never ran a 543, picked up another ported 241 a couple months ago, probably going to sell my modded 242xp. Have a great weekend.

[@poparamiro]

Thanks! Runs well and it is light... All the best!

[@vladionut3079]

Un rezultat super bun,atât la sunet cât și la taiere! Numai bine Ram🤝🤝

[@poparamiro]

Bine spus, toate cele bune!

[@adrianlupu3316]

Foarte bun clip, o treabă super faină ai făcut cu acest Muffler Mods 👍. Drujba a dat rezultat excelent 💪. Spor la toate🤝🤝🤝

[@poparamiro]

Mulțumesc pentru vizionare si comentariu! Toate cele bune!

Fain rezultatul de la final.😮 Cred că e una din cele mai spurcate tobe. Dar după mm se vede considerabil nervozitatea ei. Mișto tăieri, te salut.

[@poparamiro]

Urata toba, nu mai vreau alta 🤣🤣 Noroc ca a iesit bine.. Salutare si toate cele bune!

[@EugenTechTips]

Super fain a iesit mestere! Pai cum sa lucram cu scule stock! :D:D:D

[@poparamiro]

Multumesc! Adevarat ===))) :D

[@Memry-Man]

So to be clear you justf remove the spark arrestor and drill through to the bottom? Definitely been considering this course of action, you have convinced me

[@poparamiro]

Yes, be carefull to clean all debris...

[@Memry-Man]

@@poparamiro yes compressor on stand by 👍

[@Memry-Man]

@@poparamiro OK! that was amazing! Super super easy task! My saw can breath now! Running and cutting better then ever!

[@daig1984]

Much better

[@poparamiro]

Thanks for watching!

[@gabrielemangiavacchi]

Hello and congratulations on the change😊 With the subsequent carburetion as you adjusted, did you leave the original carburetor?

[@poparamiro]

Hi! Yes, original carb... Thanks for watching!

[@mihaiileana5373]

Salutare! După modificarea unei tobe trebuie neapărat și alt reglaj?

[@poparamiro]

Salut! Da...

[@rommelgsp1]

Do you notice bar oil leakimg from the bar nut area on the outside of the cover when running the chainsaw? Thank you.

[@shaun4bigblocks993]

I am thinking maybe that is a non-EPA saw and with out a catalytic converter. I wonder what country he is in. All of these saw videos and nobody ever shows the serial tag for reference. I can get an EPA version for US 125 but after some reading I heard it is not a true Husqvarna by design, but rather labled Husqvarna.

[@matteoraab1484]

Hello, how is the fuel consumption now with the muffler mod? Does it burn more fuel?

[@poparamiro]

Hi! A little more, yes... Thanks for watching!

[@gabrielstroemer4690]

my won’t fire up after this what should i do

[@poparamiro]

Check the spark...

[@christianlonnberg7975]

Can you help with 543xp muffler mod? U remove the baffle, drill a hole trough the muffler? But not trough the whole thing? Do you weld the baffle back on?

[@poparamiro]

Remove the deflector and make a big hole through the all layers Braze a new deflector

[@francopoggi7579]

It is to much noise now whit the exaust open?

[@poparamiro]

No, due to big deflector installed... Thanks for watching!

[@adrianstefan23]

👍👍👌👌

[@poparamiro]

🤝🤝🤝

[@alexandrupuiu1985]

Destul de vizibilă diferența după MM! Enervantă tobă, "strato"

[@poparamiro]

Foarte greu de facut, dar a meritat efortul... 🤝🤝🤝

[@eugenopincariu3229]

Super👍🏻👍🏻👍🏻👍🏻👍🏻💯

[@poparamiro]

Mulțumesc pentru vizionare si comentariu!

[@antochibogdan7090]

Cool 🫡

[@poparamiro]

🤝🤝🤝

[@crazyfeller5704]

👍

[@poparamiro]

🤝🤝🤝

[@iliecirciu1251]

👍👍👍🤝🤝

[@poparamiro]

🤝🤝🤝

[@garengtutorial8923]

👍👍👍 bagus

[@poparamiro]

Thanks for watching!

[@oscaradrenalina1]

Ta pila bez tej modyfikacji kreci sie na 14000. Niczego nie osiągnołeś

[@poparamiro]

Thanks for watching!

[@przemo218mucha4]

Pewnie gwarancję straciła,po przeróbkach?