How to make bathroom sink from porcelain tiles. Step by step.

[@Porcelanataria_45_graus]

kzbin.info/www/bejne/pWjWi5qijsuCi5I how to make washbasin with porcelain tiles ( new model)

[@sheriff5100]

Czy ten klej, którego używasz wytrzymuje na tych połączeniach 45'? Obciążenia są tam duże, a Ty po sklejeniu odwracasz ten zlew i nic sią nie dzieje.Jak to wygląda z późniejszym użytkowaniem? Czy nie lepiej byłoby po sklejeniu całą tą przestrzeń pod spodem wypełnić np. pianką montażową dla pewności?

[@diamond6256]

I have to tell you this is the best sink EVER. All MFG that make sinks make an indention at the drain inside the sink and it ALWAYS holds water and stains. You created a sink that seats the drain and with NO indention. I love it. I have 3 bathrooms. Woman 67 in Texas.

[@Porcelanataria_45_graus]

😊❤️This is the best comment I had ever!

[@dmtriymelikov7056]

It's very nice when a person can work with his head and his hands. Keep your great work!

[@Porcelanataria_45_graus]

Anything is possible when you have the right people there to support you. 💪🏼❤️

[@smshh33]

Incredible! I didn't even realize its a hidden drain until the end....just wow!

[@RobBirdNerd]

This video was amazing, had me *GLUED* the whole time! im actually going to save this video and have a go myself when i can, thank you!

[@Porcelanataria_45_graus]

It is my pleasure to be useful! Thank you for your comment!

[@MaddclownG]

@@Porcelanataria_45_grauswhat glue/epoxy you used to stick the tiles together and where can I buy it

[@ridersandro]

May I ask you what kind of glue did you use?

[@thechosenone3504]

@@ridersandro tenax mastic polyester glue. it comes with a hardner you need to mix in with the resin and you need to buy coloring paste to match the color of the tile

[@areyouearthing]

This guy is a master and I'm not even going to attempt this.

[@Kerlit_SPb]

Дамир, приветствую! Музыка, работа- молодчик! Твори и прлучай блага❤

[@Porcelanataria_45_graus]

Приветствую друг! Большое спасибо за комент!

[@veneraalmukhambetova180]

Красота да и только. Всё доступно и понятно показано🙌🔥🔥🔥

[@user-pwfus]

Stunning sink and design keep it up.

[@MatysPL200]

Wooow, perfect job, my friend❤❤ Thank you for a very good idea 💡

[@magsman448]

He has a water jet at the back just out of camera shot! But TBH To fabricate this using just the basics, tile cutter and grinder is next level craftsmanship. Hand made porcelain basins like this, here in the UK, are going to cost in excess of 2000 pounds! Far from easy to make, although you wouldn’t believe it from this video! This is definitely the guy that you want to be tiling your bathroom!!!!!

[@Porcelanataria_45_graus]

Thank you for your comment! I would like to make the basin for this price 🤩

[@Imthekingofdogshite]

Absolutely right. I got some quotes for similar and prices were astronomical. Same goes for worktops.

[@chahine_jb]

God willing, I liked your work, you are an amazing person, God helps you and helps you in everything Long live to you from Tunisia 🇹 🇳 🇹🇳 🤍

[@Porcelanataria_45_graus]

Thank you dear! 😀

[@db0nn3r]

Hey, thanks for making this. Awesome instructional video.

[@MrSchonjohn]

Turning shit into a Snickers is an art, well done, I steal that idea from you!

[@csnoorbd]

Love you from Noakhali, Bangladesh 🇧🇩

[@Porcelanataria_45_graus]

Hello from São Paulo! Thank you for the comment!

[@mosuhu]

Love it, it turned out amazing! You make me want to my own one! 😮

[@Porcelanataria_45_graus]

Thanks for your complement!! Lets continue to do our best !

[@MikaBackstrom]

Amazing! Really nice! Good job

[@foybaby]

Beautiful!!!

[@peggykm4977]

This is amazing work; what country are you working in? I am in the USA and think you do fantastic work!!

[@Porcelanataria_45_graus]

👋🏼 hey, thank you very much! I’m living and working in Brasil 🇧🇷. Near São Paulo.

[@peggykm4977]

Oh!! I have been to Rio years ago!! Beautiful country!

[@csilva7837]

@@Porcelanataria_45_grause eu achando que tu era gringo 😂. Parabéns pelo lindo trabalho ! Esse vídeo está maravilhoso com todos os detalhes. Me inscrevi e deixei meu curtir!

[@ПавелАфанасьев-п1ч]

Круто получилось. 👍🔥

[@ПавелАфанасьев-п1ч]

Я задавал вопрос к прошлому видео, повторю здесь. Для чего используется пу герметик? Если просто клеем заполнить , не достаточно?

[@Kerlit_SPb]

Паша, привет!!!!!😊

[@ПавелАфанасьев-п1ч]

@@Kerlit_SPb Привет

[@joswassenyos2810]

Impressive great masterpiece ❤

[@tubamusikvideos]

I'm a big fan of your work! It's inspired me to give it a go myself. I purchased some cheap tiles to prototype and trial with, and I have some questions regarding my results: 1) I found it incredibly difficult to do a nice 45o bevel with an angle grinder, particularly so on the inner edges of the trough. I found that the polished edge of the tile would chip when I did it with my angle grinder. I suppose that this is a matter of practice, but it could also be my blade. Is there a particular blade you recommend? 2) What adhesive do you use? I saw on one of your other videos, and from comments that you use Tenax, but there are several different polyester adhesives they carry. Is it the "Knife Grade White" that you use, or some other one? 3) What dyes do you use for your adhesive? 4) What size of hole saw do you use to cut the holes? 5) Where do you get the stainless steel drain pipe? 6) How do you glue the drain pipe to the sink? Do you seal it as well? I plan on making a very large sink, 20"x40"x12". Given the size, I was planning on supporting it from the bottom and building it into a cabinet. Do you have any advice/suggestions/reservations? Keep up the great work, your sinks look amazing!

[@Porcelanataria_45_graus]

Hello dear! Thank you for the watching and the comment. I really appreciate it. 1) yes this is the matter of practice. But you can try instead of grinding conical stone to use polishing pad N 200. 2)about poliester glue. Here where I’m living Tenax is expensive one. So we use another poliester glue. It is cheaper . Try to make some tests with glues of Tenax. I know there are solid and liquid form. Did you try to work with solid one? 3) I use common dyes used for painting walls 4) 32 mm or some times 35 mm 5) take a look at Aliexpress. 6) you mean the sink drain valve right? I fix with sealant PU 40 . Do not use poliester glue for fixing it.

[@Porcelanataria_45_graus]

About fixing. I would use 2 brackets fixed on the wall to support the sink, and after installing the sink I would fix a cabinet . But your idea is good as well. You can put the sink about some bottom of the cabinet .

[@JohnLegnos]

My friend, this was incredible! what a great video and product. Muito Legal! I justt started up my bathroom remodeling company, and have been interested in offering custom sinks like this. Will be trying it out. At the end, I see a piece of tile covering the drain. how much space on all sides to you leave for drainage? And are there any "feet" under it holding it up for the water to run? Sorry if I missed it in the video!

[@Porcelanataria_45_graus]

Hello dear. Thank you for you comment I success in your business. Actually I didn’t show in the video. You can leave 5 mm from each side for drain the water and yes there are feets that I glued with PU sealant on 4 eadges

[@CasaElements]

Beautiful! Thank you for the response. It is much appreciated 👍

[@camskea]

Incredible work, just amazing. What country are you in?

[@Porcelanataria_45_graus]

Hello thank you. From Brazil

[@Z-add]

do a complete video on tile adhesive and PU sealant

[@Porcelanataria_45_graus]

Hello, this is good idea. I will think about

[@csilva7837]

❤muito obrigada 🎉🎉🎉🎉 mostrou absolutamente todo o processo até como instalar! Saudações do Rio de Janeiro - Brasil

[@Porcelanataria_45_graus]

❤️

[@mehamadlokman9445]

C'est un excellent travail, bonne chance

[@SPLENDORISTA]

This is Genious, i wish my husband would let me try this 😅

[@Porcelanataria_45_graus]

Thank you! You can do it!

[@julientiler]

very informative. thanks! 👏🏻👏🏻👏🏻

[@Porcelanataria_45_graus]

Thank you. I’m following you !

[@jpconstrucoesparaiba]

acabei de mim escrever. e vou tentar fazer uma dessa depois desse passo a passo valeu boa sorte no canal

[@Porcelanataria_45_graus]

Olá 👋🏼 maninho! Muito obrigado! Com certeza vai fazer sua ainda mais bonita!

[@chefnouryano8089]

Great job 👍

[@IngridRijo]

I am amazed with your work, i wished my kitchen would have that finish unfortunately the people that did it dont know how to joint the tiles and make them seemless. Could you tell me about that glue with color that you added at the joint of the tiles please ? Thanks

[@Porcelanataria_45_graus]

Hello dear! Thank you for the watching and your comment! I use poliester glue for stones and marble like Tenax ou Granit. To color it I use diy for paint .

[@Kristenoyinbo]

Incredible!

[@jamesnyabunze428]

Awesome. Do you mind sharing list of all the materials you used to complete the job? Esp the recommended mastic glue brand

[@Porcelanataria_45_graus]

Thank you for the watching. Actually I have one video about tools and material I have used . But especially about the glue: Tenax mastic for stone and marbles.

[@freedomofreligion3248]

Beautiful design, outstanding execution, excellent video! THANK YOU. WHAT is used to create "glue for stone"???

[@Porcelanataria_45_graus]

Hello! Thank you, I use the mix of polyester resin (with catalasator) + industrial talc. I know that in Europe exists special glue named General about 20 € for 1 kg. But you can also buy any mastic for fix and glue marbles and stones like Tenax ou Granit

[@carloswurges6974]

Good job 👏🏻👏🏻👏🏻👏🏻

[@zarak5055]

if you had a workshop teaching this, I would be the first one to register

[@Porcelanataria_45_graus]

Hello dear! Thank you for the idea. I will think about it

[@Jozani77]

Awesome work 🔥

[@takojeto]

Great work !!! But please tell me in the end you put a tile in the sink where you don't see the sink valve ..HOW u put that tile in ?

[@Porcelanataria_45_graus]

Hello dear ! Thank you for the watching! This tile is just for hide the bottom and the valve. But it is easy to remove it. It is not glued.

[@Porcelanataria_45_graus]

Hello dear ! Thank you for the watching! This tile is just for hide the bottom and the valve. But it is easy to remove it. It is not glued.

[@johnroberts5357]

Very creative. Quick question for you: I have purchased a basin which looks like it’s constructed exactly like this with pieces of tiles glued together and the weight is quite heavy. As i am quite old school and used to one piece molded basins I’m a bit paranoid as to how durable the glue is that’s holding all these tiles together. And essentially the main bowl holding the water has lots of tile joints. Do these hold up well even if the bowl was full of water and in the long run?

[@Porcelanataria_45_graus]

Hello dear! Thank you! Yes it is very important the tile joints hold up the water and the sink do not leak. For this there is some process to glue the pieces between themselves. Check some important step: 1) after polishing it is important make a rough surface . In the video I have showed how to do this 2) before glue the tiles you need to eliminate all dust etc 3) to use PU sealant in all corners and tape for drywall with the glue to reinforce the pieces. Wish you to fabricate your sink with your ✋ 🤚

[@thechicadvocate]

Amazing work. We will try. Do you have the sizes of the different parts or how do you figure out the measurements ?

[@Porcelanataria_45_graus]

Hello dear! Thank you for the watching. The size of the sink is 60/42 cm, The high of the skirt is 12 cm, The high of inner walls of the hole is 11 cm, The hole about 40/26 cm, The backsplash of the sink is 14 cm.

[@ednilsonferreiradossantos6551]

Parabéns muita qualidade profissional de primeira

[@JacobPetersen4]

so is the only thing holding up the sink a rod glued to tiles on the wall? Or am I missing the way it is attached? also I wonder the integrity of the sink if someone we to drop something heavy like a buzzer or hair dryer because it is hollow? I might try to make something like a ramp style but maybe reinforce the back with some sort of substrate

[@Porcelanataria_45_graus]

To fix the sink you can use any mount brackets according your preference. In my case I use diamond saw hole diameter 35 mm and the tube with d=33 mm. With the saw I drill a hole on the wall and after put the tube into the wall and fix with mortar or with proper glue for marbles. The reason: is cheaper in 3 times then mountain bracket. About integrity of the sink. The sink from porcelain tiles is like any clay-based ceramic material. If something heavy to drop about there is risk to be broken. And congratulations for your observation: actually there is important to reinforce with another layer of tiles to improve resistance .

[@biskrabiskra9248]

Welcome. May I know the name of the glue or how to make it?

[@Porcelanataria_45_graus]

Tenax mastic to fill and glue marbles and stones

[@mohammadbyrami9528]

Hi ,what glue are you use for marble stone ?

[@Porcelanataria_45_graus]

Mastic for stone Tenax solid form

[@jossarodriguez1514]

HI! GREAT WORK! Do you have a manual for this including the waiting time for application of glue?

[@Porcelanataria_45_graus]

Thank you dear for the watching. Unfortunately I don’t have the manual. Only the one on the video .

[@MakTayem-rx5lf]

Pls, make bathtub DIY from ceramic

[@rafikdaoud7482]

You are a profissional my friend 😊

[@Porcelanataria_45_graus]

Thank you so much! 👍🏻

[@1999ihab]

Hello, Can i ask what the name of the glue is?

[@Porcelanataria_45_graus]

Hello, Tenax mastic for stone and marble

[@sadoismaili1]

what kind of glue u use for sides and how to search it and where to find it? btw great job and pretty nice looking classy👍👍👍

[@Porcelanataria_45_graus]

👋🏼 I use mastic for to fill and glue marbles and stones. There are different names of it like “Tenax” , “Granit”. In Europe you can find “General”. Search it on the internet.

[@0121b36]

Brillant sink, what are the measurements for the sink, please?

[@Porcelanataria_45_graus]

Hello dear! Thank you for the watching. The size of the sink is 60/42 cm, The high of the skirt is 12 cm, The high of inner walls of the hole is 11 cm, The hole about 40/26 cm, The backsplash of the sink is 14 cm.

[@0121b36]

@Porcelanataria_45_graus thank you so much

[@0121b36]

@@Porcelanataria_45_graus thank you 🙏🏽

[@kalamansi9643]

The question is will the water flows down or stock there because our sink that is diy too is has water in sink that never go down unless we push the water to the hole

[@Porcelanataria_45_graus]

The water flows down and do not stock . It is tested and is working

[@johnrobertelardo9787]

How thick is that tile?

[@Porcelanataria_45_graus]

10 mm

[@thiyambishwanathsingh4188]

Can I use epoxy to join because I can't find the glue

[@Porcelanataria_45_graus]

I have never used epoxy to joint tiles .

[@aamirmehmood6255]

Its took Too much time and effort👍🏻👍🏻👍🏻

[@LalrinAwma-vt6tv]

What glue did you used?

[@Porcelanataria_45_graus]

Tenax mastic for glue and fix marbles and stones

[@passmanmithetomathebula2692]

That's what I want to know if I can know the glue I am done

[@beaureijnders5292]

What did you use for the reinforcing of the sink. Is it just tile?

[@Porcelanataria_45_graus]

In this case I used tape for drywall and the mastic to reinforce the sink.

[@aghakelvin2772]

Nice

[@hossamabokhair4011]

PERFECT

[@boitumelochombo3142]

Whats the type of glue you are using? How long does it last?

[@Porcelanataria_45_graus]

Poliester glue for marbles and stones like Tenax, Granit or General. It lasts for years

[@masterpro_1163]

Для армировки внутренних углов попробуй tafteip ленту, она полимерная, на разрыв хорошо держет👍

[@Porcelanataria_45_graus]

Она обычно в гипсокартонных работах используется? Я поискал у нас на местных сайтах и не могу найти.

[@РашидОтажанов]

АсаСалом алекум Дамир Ака.Очень круто супер.про клей инфо пожалуста..Дай Бог здоровье.Спасибо

[@Porcelanataria_45_graus]

Приветствую Рашид! В России и думаю в других странах СНГ продается полиэфирный жидкий клей для работы с камнем. Есть Granit, litocol и разные другие. Также можно попробовать купить полиэфирную прозрачную смолу (с отвердителем) и белый промышленный тальк (нужно поэкспериментировать какой из 4 видов наилучше подойдёт) и сделать свой клей.

[@РашидОтажанов]

@@Porcelanataria_45_graus Рахмат. СПАСИБО БРАТЬ.БЛАГАДАРЮ.УДАЧИ ВАМ.ЕШЁ ЖДЁМ ЧТО ТО НОВИНКОГО.ЭТОТ ТРЮК ОБЕЗАТЕЛЬНО ПОПРОБУЮ.ВЫ УЖЕ ДЛЯ МНЯ НАСТАВНИК...

[@mahmoudshehta4768]

What is the name of the material used for adhesive?

[@Porcelanataria_45_graus]

The glue for marbles and stones.

[@antonioocasio2145]

What glue did he us to put it all together

[@Porcelanataria_45_graus]

The mastic to fill and glue for marble and stone . Search it on EBay or Aliexpress

[@papciak1083]

what is the tillesthickness?

[@Porcelanataria_45_graus]

9 mm

[@sreerudran7021]

which gum are you using (type of gum not the brand)

[@Porcelanataria_45_graus]

Poliester glue for marbles and stones

[@jamesnyabunze428]

Whats the thickness of that tile? Does thickness of the tiles matter?

[@Porcelanataria_45_graus]

The thickness is 10 mm, but I have used also 8 mm, that is well good too.

[@jamesnyabunze428]

Ooh, ok thank you

[@francoaguero2696]

Hola! Muy buen video, alguien me podría decir que tipo de pegamento usa?

[@Porcelanataria_45_graus]

Ola amigo. Eu uso cola para mármore e granito. Se tu estás na Espanha podes procurar cola que se chama General .

[@rjsolanki0828]

sir which glue you used for stick a tile???

[@Porcelanataria_45_graus]

you can use any mastic to fill and glue marbles and stones. There are a lot of fabricators and names but it depends where you live.

[@rjsolanki0828]

@@Porcelanataria_45_graus thanks 😊 sir

[@amataysidi9011]

What glue do you use ?

[@Porcelanataria_45_graus]

The glue for marbles and stones.

[@amataysidi9011]

@@Porcelanataria_45_graus Thank you ♥️👏

[@amrnagah3398]

IT"s GOOD IR WHAT IS THE MATERIAL USED TO JOINT PART COULD YOU SEND ME ITS NAME AND IS IT RELIABLE FOR LONG RUN?

[@Porcelanataria_45_graus]

Thanks for you comment! You can search on the internet: marble glue, marble adhesive, stone mastic. There are some name like Tenax, granit, shelber, joinfix etc

[@Porcelanataria_45_graus]

And yes it is reliable for long time.

[@atc2304]

hello how thick is the porcelain tile used ? 15mm? 12mm ? 9mm ?

[@Porcelanataria_45_graus]

Hello 10 mm

[@beaureijnders5292]

What is de size of the tile you use?

[@Porcelanataria_45_graus]

120/60 cm

[@gardeningideas8890]

dose it strong

[@Porcelanataria_45_graus]

Yes it is! 💪🏼

[@mehamadlokman9445]

S'il vous plaît quel adhésif utilisez-vous pour fixer les pièces

[@Porcelanataria_45_graus]

Hello! You can search on Aliexpress eBay or Amazon mastic for fix and glue marbles and stones. You will find “Tenax” or something like this. “Granit”

[@tiler_filimonov73]

Дамир здравствуйте!Хотелось бы по подробнее про использование марки клея,и работы с ним.Заранее СПАСИБО!!!🤝🤝🤝

[@Porcelanataria_45_graus]

Приветствую, Василий! Мы в Бразилии используем смесь полиэфирной смолы с промышленным тальком. В России можно использовать «Клей Elkay ЕВ25 - GRANIT» Также ребята рекомендуют litofix от Litocol и Mastice 2000.

[@tiler_filimonov73]

Дамир 🙏 от души большое СПАСИБО!!!Буду и дальше следить и учиться,очень мало информации в России.

[@НурикИманов-у2з]

Клей DERMAX двухкомпонентная для камня

[@vidzdotcom]

How u add colors in glue? Which type and what proper color so its easy to clean later and do not change color as it gets old..?

[@momceecarrelage7454]

Hello where can i find this Glue for sink ? can I buy in internet someone help please

[@Porcelanataria_45_graus]

Hello. You can search on EBay. There are some mastics.

[@slametriyadi8927]

Itu pake lem apa ya

[@Porcelanataria_45_graus]

Saya menggunakan perekat batu poliester seperti Tenax atau Granit

[@rosita4935]

Me gustó todo menos el caño o grifo porq es de cocina😮

[@Porcelanataria_45_graus]

🫣😁 you have a reason

[@МаксатбекТурганалиев-х7х]

​@@Porcelanataria_45_grausАссалому алейкум Дамир правильно говорит, всё отлично кроме смесителя, я думаю лучше всего подойдёт смеситель в стиле хайтек.

[@rudywooders9602]

you did a great job. But why In the end you put another tile inside the basin and cover the drain hole?

[@Porcelanataria_45_graus]

Hello. Thanks for the compliment! Let me clarify the matter, the tile inside the basin is removable it is not fixed with glue. He serves to hide the drain hole. You can take out it if it is necessary.

[@rudywooders9602]

@@Porcelanataria_45_graus oh sorry i didnt notice .Another question. I make marble basins almost same way, but I always put tile grout inside the basin joints because older craftsmen told me that AB marble glue loses its adhesive capability after a period of exposition in water. Did you have any problem on these tile basins ?

[@hms1018]

That is a classy look! Love it❤

[@vlademirepifanio7745]

top excelente

[@tiler_filimonov73]

🔥🔥🔥

[@victoriahajdini8291]

In the last minute the sink has a hole and then the hole dissappears

[@Porcelanataria_45_graus]

Yes I put piece of tile to hide the hole. But it is removed

[@GospelOutside]

@@Porcelanataria_45_graus 😅

[@construction02]

👍👍👍👍

[@oyabitv1302]

❤❤❤

[@sedatkayalar2689]

skill

[@leonidpustylnik5408]

A 4to B tubuke?

[@Porcelanataria_45_graus]

Germetik PU

[@pedrosousasilva4660]

Vc pode passar a medida

[@Porcelanataria_45_graus]

Olá! Posso. Parte externa 60/42 cm Frontal : 15 cm Saia 15 cm O buraco da captação da água: 44/28 cm Lateral comprido do buraco da captação 46 cm com altura 12 cm Lateral curto 28/12 cm

[@MasoomRaza...]

🎉❤

[@Slaff-d3v]

Ещё бы перевод текста был😂 а то нифига не понятно

[@Porcelanataria_45_graus]

Это видео есть с русскими субтитрами

[@Slaff-d3v]

@@Porcelanataria_45_graus кинь ссылку не нашел или пропустил

[@MrAdrian32]

Hello who can build one for me?

[@Porcelanataria_45_graus]

Hello dear! You can try by yourself)

[@MrAdrian32]

I would like you to build and I will pay If you can please thanks

[@nonitoursula1241]

I watched the whole video. Amazing workmanship. But because i am careless, that would be dangerous for me.

[@m.r.cartacabamentos2239]

Show

[@Porcelanataria_45_graus]

instagram.com/porcelanataria_45_graus?igshid=MzRlODBiNWFlZA==

[@martynasviskontas1222]

Cowboy

[@sheriff5100]

na co to kleisz?

[@Porcelanataria_45_graus]

Tenax mastic glue www.tenax.it/en/products/professional/solido-xq/

[@плиточник.кст]

Здравствуй Дамир, есть у вас Инстаграм

[@Porcelanataria_45_graus]

Приветствую, Вячеслав! Да Porcelanataria_45_graus Damir Almukhambetov

[@jonathan-tt8tn]

What glue did you used?

[@Porcelanataria_45_graus]

Tenax, Granit.