Porsche Macan Intake System by Flat 6 Motorsports

Unboxing, Installing, and Dyno Testing the Porsche Macan intake system by Flat 6 Motorsports. This system is the quickest way to add proven horsepower to your Macan, Macan S, Macan GTS, and Macan Turbo.
In this video we show you what you get in the box when you order the Flat 6 Motorsports intake system and then show you a step by step guide on how to install this system on your Porsche Macan. With just a T25 torx bit and 10 minutes of your time this install can be done even by the most novice mechanic, which is not something you can say about a lot of aftermarket high performance parts. After we installed the Flat 6 Motorsports intake system we did some pulls on our dyno to see how much power was gained. We were pleasantly surprised t o discover that this product delivers exactly as advertised and is great value for money in terms of power gained on the dyno and time spent installing it.
If you want to learn more about the Flat 6 Motorsports Intake System for the Porsche Macan click on the link below:
www.forgedperformance.com/stor...

[@RebuildRex]

Cool to see the real time results from the intake system on the Dyno.

[@SaulV]

Wow I just did the same mod but didn’t realize that it would add 10 HP.... sweet! They add up

[@brockdez1259]

I think the hood should have been closed since it looks like it seals to the airbox…more representative of street driving

[@etsonos]

All of the many intakes I've gotten for my different cars had one thing in common. The manufacturer always advertised a certain amount of horsepower increase just by bolting it on. The problem with this is they always do the test on a Dyno right after installing it. Modern cars have ecus that limit torque to the factory specs. What usually happens when you first install an intake is you will see an increase because the ECU has not adjusted. Once you've driven that car for a few days most intakes will show 0 to very little gains. The only way around this is to get the cartoon to take advantage of the added airflow. In short, dynos that are taken right after installing an intake are bogus to me

[@ColabGarage]

Thank you for the added commentary... Curious if you have tested this on the Macan platform to validate your theory or if this is just a general statement? We did not test this after the ECU would have adjusted its trims to see if your assumption is correct or not. So if you have some added data to share we would welcome that so people of these videos are fulling informed. Our next step a few days later was to add the Cobb Access Port OTS map which does take advantage of the added airflow, more boost pressure, timing, etc...

[@BrianSchoedel]

Nice !

[@scowil456]

Great vid! Do these filters also work with the current 2023 V6 twin turbo Macans? Thanks

[@kevisrosario108]

Good job guys!

[@ColabGarage]

Thank you! We have a few more videos planned for this platform stay tuned!

[@c_b_3_]

Very nice! Gotta love the added carbon fiber! Cool to see some simple mods and dyno results. Any other cars/mods planned for videos like this?

[@ColabGarage]

Yes, we would like to do more daily driver type videos like this so people can see how these mods improve the performance of their car. As fun as 2000whp GT-Rs are we like to build the family haulers also!

[@grod9976]

Hi, do these fit the 2021 Macan GTS? Mine will arrive in October, but the first thing I usually upgrade on all my cars is the stock filters.

[@jimmy8693]

Is there an equivalent for the 2.9l that’s in a 21 GTS?

[@troyrambo6804]

Does this in any way void warranty? Any benefit to doing this on the Base 2.0 with a single intake? Anyone tried that?

[@JasonOBrienThinksHeCan]

The link in the description is not working

[@kyungwoolee1483]

Hello, I am a person in Korea. There's not much information about the debater valve. My car is a 15-year-old Macans. Do I need two deburter valves to fit them? Are the two the same? I'll be waiting for the reply.

[@ColabGarage]

It is highly recommended to replace the diverted valves once you tune it to avoid part throttle drivability issues. Light throttle and wide open they are not needed unless the boost is turned up to the limits of the turbos.

[@Acosta911GTS]

Do you hear the air intake system louder when your driving? Odes it make a more aggressive sound when you get on it like other intakes?

[@ColabGarage]

It does. You can also hear the diverter valves much more as well.

[@warmongerairsoft]

Did you guys tune it all all before doing the pulls on the dyno?

[@ColabGarage]

We did end up putting a Cobb Access Port on the car but this test was done without any tuning.

[@gordonlewandowski77]

Were both Dyno runs done with the hood up? Why not do the runs with the hood down for both? More “real world” . . .

[@ColabGarage]

You are right but we did the original dyno with hood up so we wanted to match the conditions having the only variable that changed being the filter and box.

[@thatredcam]

How long do these filters last? And are they reusable? Thanks 😁

[@taylor315]

Flat Six says you can wash them in soap and water and let dry for 24 hours before reusing. Or you can have a couple sets to swap out and clean when the other gets dirty, your choice

[@carsondik]

@@taylor315 but how often

[@bsfunk44]

@@carsondik what does that matter? If they get dirty clean them...is that hard to comprehend?

[@carsondik]

@@bsfunk44 ok buddy

[@MicrowaveJournalVideos]

@@carsondik I think every 15k miles - just clean them every 10k miles with the oil change

[@michaelk3235]

Do you sell a filter for a 2019 Macan S?

[@ColabGarage]

We do not, but our friends at Flat 6 motorsports do

[@CarJunkie]

I don't see where the new Carbon fiber top would be any benefit. If you don't care about Carbon Fiber bling, couldn't you install new high flow filters and achieve the same result?

[@ColabGarage]

You are right, very minimal gain by opening the covers all the way up but it does open up additional air flow to the boxes… secondarily, when modifying cars a lot of it is improving the ascetics which these definitely do.

[@sphinx5101]

Is it safe to open it right up like that is it safe for like water and stuff

[@ColabGarage]

It just opens it up more than it already is so there really no additional risk there in terms of water intrusion, etc.

[@sphinx5101]

@@ColabGarage 👍👍

[@BF1GUN]

I presume that when you carry out these upgrades, the Porsche warranty becomes invalid?

[@ColabGarage]

That really depends on your local dealer. But typically just changing an air filter will not void your power train warranty.

[@sbfhawk4343]

@@ColabGarage That was my next question as well. I mean I do not want to mess with the warranty but how in the life can a better breathing Air Filter be a detriment to the engine but a plus benefit. Porsche just wants you to keep changing them out so they Charge you$$$..Stupid we know what really works.

[@ortcloud99]

"intake system" do you mean an air filters? Not sure it is a "system"

[@trickydownunder]

Site closed

[@bsfunk44]

Cutting the center out of the stock air filter covers achieves the same thing and saves $200. Or buy spares from Porsche for $80 and cut those.

[@trickydownunder]

How’d ya do that then

[@ghlibisk67]

The slots in the hood that feed the intake are real bottleneck. The dyno pull with the hood open is pointless.

[@wallyj2000]

Why was the Hood open? Also this probably voids your warranty so for 10 hp in a car that I'm not dragracing, not worth it.

[@live2hustle495]

y worried about warranty???

[@jettaphillips5023]

Mine is well out of warranty at 94k miles and have no reliability issues with it.

[@ortcloud99]

void your warranty? Its not a permanent modification, just swap the stock filers back in if you need to bring your car in for warranty work, take 10 minutes.

[@live2hustle495]

@@jettaphillips5023 just passed 100k, so far mines have 0 issues!

[@taylor315]

@@live2hustle495 I’m at 108,000 miles and zero problems! I do have a third party warranty now just incase but still, it’s rock solid like new, very impressed