Portable band saw stand

[@jpparker19]

Finally a video that shows and easy way, with plans, to make a vertical stand with common parts and simple cuts. Bravo!

[@colten1d]

I have looked at a lot of videos about holders and stands. Yours is one of the best. Thank you So Much! I will try and build one just like yours. I have an old large saw that the gearbox was worn out when I purchased it. This will enable me to use my portable saw until I can make a gear for mine. They no longer make my old industrial saw parts. Again Thank you. Also Great Video, well put together, no nonsense, straight to the point. You get a FIVE STAR rating.

[@markamy357]

I did this build and use it all the time for 3 years very useful I made the removable table not screwed into place but it has a small square tube underneath that slots into another square tube welded on near the hinge

[@CavernainElmira]

Grazie mille, thanks for the very very nice designed stand and all your drawings available, ciao from Oregon.

[@garyhall867]

Yes well done very common sense approach especially with vertical and horizontal cutting with one stand 10/10 thanks for the plans as well.

[@tttiiimmmiiittt]

Вот спасибо большое! Как раз нужно сделать такую станину для макиты. Прошёл год.Я её сделал!!! По мотивам Вашей станины. Осталось придумать плавное опускание пилы на заготовку.

[@jconnar]

зачем верхня рамка отдельно? не проще было из двух частей делать?

[@frd15rpd10]

@@jconnar Yes, you are right. There are certainly other designs. The goal is that it can be disassembled without taking up space

[@sunflowersunsets5913]

I have seen so many designs for these stands. Or just a vertical or horizontal all different name brands of saws. It seems as though they all have major issues as far as time to build or parts & metal needed, way to much ECT.ect.ect. NOT YOURS, GREAT SHORT VIDEO PLUS PLANS. I LOVE IT. I WILL TELL ALL, & BY THE WAY, THIS IS WHAT YOU TUBE IS TRULY FOR. AGAIN, GREAT JOB. KEEP IT UP !!

[@noskoffserg]

спасибо за подробное описание! подписался

[@Techviewable]

Really well done !! with the plans included the video is a 5 star. thanks

[@Techviewable]

I am in the process in making a stand and i will incorporate many of your inventions in my stand. So again Thank you very much

[@sunflowersunsets5913]

THIS IS WHAT YOU TUBE IS FOR! GREAT JOB

[@alexofischen]

😀Vielen Dank für die Maßen und den Plan! 🤝

[@kennypham8x]

Very simple and convenient for work, great ideas

[@mauriliomotasilva3613]

Good job. Thanks for the plans as well.

[@radar.9118]

سويت مثل القاعدة ونزلت شرح..اذا بحتث عن الفيدو..لايظهر بالبحث..شكرا يوتيوب؟

[@davethurston753]

Very Nice. Thanks for sharing.

[@MrNytrosdad]

How nice of you to share.... Thank you

[@1miltond]

Thank you great idea and great video

[@josephwhite9992]

Gonna make one of these for myself with my everlast welder and some of the spare metal I've got.

[@peterelios7568]

f off with the everlast welder.

[@khairulanwarazhar6695]

are you using oem blade from makita or other brand?

[@paveljelinek7119]

Hi, very well done, thanks for sharing. Could you please tell me what did you exactly use in the place of the screw nuts marked with the blue color in your scheme? It looks like a small pipe with lengthwise cut. The hole for the screw thread was made on a lathe? Or what kind of pipe did you use? Many thanks.

[@frd15rpd10]

Dear Pavel Jelinek, you are right, these parts (and others) are made on a lathe : pierced and tapped steel piece. Then it is soldered.

[@CallaFab]

Impressive! Good job.

[@frd15rpd10]

Les plans 2D sont téléchargeables ici (Download plans here) : usinages.canalblog.com/archives/2019/09/09/37623049.html

[@OlTrailDog]

Excellent design, instructions, and video. But where is the raucous rock or techno music??? I took a bunch of screen shots because this is the design I would like to build. I will try and pivot the drill press vise for the angle cuts. It accomplishes the portable, horizontal, and vertical needs without dismantling the saw and rewiring. I will also add a foot pedal for safety.

[@ateliersolidaire4558]

Bonjour super job il serait possible de télécharger les plans freecad? Merci

[@jconnar]

зачем верхня рамка отдельно? не проще было из двух частей делать?

[@gotzolones]

La longueur totale de la mesure de base ne l'a pas vue. une partie 41,8 ou 47 est vue jusqu'à l'axe mais pas le total

[@frd15rpd10]

Bonjour Gotzolones, Désolé pour l'oubli. La longueur totale extérieure est 640. S'il vous plaît, téléchargez les plans ici : usinages.canalblog.com/archives/2019/09/09/37623049.html

[@gotzolones]

@@frd15rpd10 Merci beaucoup. Cordialement

[@bastling5955]

Hello my Friend. When you are cutting steel, which speed do you have on saw? Speed 1, the slowest? How many TPI You use on your saw blade? Thank for answer. Take care, bye bye :)

[@frd15rpd10]

Hi, I use a MORSE 20/24 TPI. I have not tested less TPI because it works very well for pipes and plain metals -even large-, and wood. What I can say is that in normal hand use (not the saw mounted in the stand), during the cut, the piece is pushed pushed against the adjustable vertical metal plate. With the stand, it shouldn't be the case, so the stiffness of the stand is a limit . In the first test, there were a lack of stiffness and many vibrations, so I added a screw, tapped at the back of the saw. You can see it on the plans. I am using the slowest speed to limit the noise, but maximum speed should work

[@neilwhite58]

Really nice! But think you need a new blade.

[@MrKim524524]

Where can I get the plans for your project I like the looks very much

[@frd15rpd10]

Dear Kim Brerwer, The plans are at the end of the video. You can also download them here : usinages.canalblog.com/archives/2019/09/09/37623049.html

[@ВладимирКолченков]

Здаствуйте а есть чертежи и размеры??

[@AlexanderMoon]

Amazing!

[@ThePsychoNad]

Could I get plans? I like your design.

[@frd15rpd10]

To be convenient, plans are at the end of the video. Please, make screen copy

[@man.i.literally.failed6772]

HEY Makita, are you watching this!!

[@johnjude2685]

Horzonial it's great , but up just to much reaching Thanks for showing

[@Vitaliy31.228]

👍

[@4789-f1h]

Hi, I love this vid...Can you send me spec of your drawing? thx

[@noisyneighbour2356]

Goodbye fingers 🤟