Portable bluetooth speaker build part1

[@bmwcarguye36cars68]

1 thing 2 say 3 words 4 you. I love this!

[@skirfanirfan5864]

Wow super music and Bluetooth speaker Thanks Brow

[@gustu9906]

Nice speaker but in Bali difficult to find board

[@insaneroguegamingchannel8038]

Can you give me the dimensions about the wood. Thanks

[@HaimPeretz]

Nice build! What are the measurements of the enclosure and Have you calculated for this speakers?

[@Erikdidit]

Thx! The measurements are about 25x11x7,5cm, outer diameter. I dont remember, but I dont think I calculated anything for this speaker. I typically use bassbox when I calculate.

[@DaniMutaqin]

What kind of cable are you using?

[@lawrencemaithyamutie4013]

I like your builds bro

[@Erikdidit]

Thank you!

[@mynameisbond711]

hello, a question, what are the measures? I think I'll try to do it.

[@Erikdidit]

About 25x11,5x8cm. Good luck!

[@lee26carl]

Nice speaker!!! 1 thing. I think 1 passive radiator is fine. I make same with 2 passive radiators. It makes less bass response. Because the air was divided that result to less vibrations.

[@Erikdidit]

yes you are right about the passive radiator. One would be better with these small speakers.

[@lee26carl]

Erik did it any way. I like your designs. Im just jealous because you have access in all good tools!!!

[@kvcp2563]

Nice, what table saw do you use?

[@Erikdidit]

Holzmann Ts200

[@Wunderbiber]

What Kind of wood did u use at the Front? Btw nice speaker👍

[@Erikdidit]

Thank you, I used walnut, oak and plywood

[@jonaskriegl4786]

Hello, can you recommend your table saw

[@Erikdidit]

Hi, both yes and no. I almost regret that I didn't buy a bigger one. But I cant justify to spend more money since I'm only an amateur and just getting started. But I do like this saw. It was pretty hard to adjust everything when I mounted it together but it works fine right now. I haven't really pushed it with big chunks of hardwood tho.

[@Nico_Rinke_]

cool speaker

[@n_n8236]

Do the speakers crackle on max volume?

[@Erikdidit]

+Nic Nonneman I haven't played that loud with them. But without a crossover they probably crackle

[@n_n8236]

ok thanks ; ) edit: I love this spreaker sooooo much. When I was dessining one with the same speakers and radiator, I came across this video and noticed that the speaker is almost identical to mine, so I knew it was going to be good ; ) (sry for my bad English, I'm from belgium).

[@elevierbeltran8703]

When is sound test coming

[@Erikdidit]

Soon, I just need to get a hands on a decent microphone before I can record it. Sorry for taking so long.

[@elevierbeltran8703]

Np

[@elevierbeltran8703]

Can't wait

[@777Melin]

jag gillart! viking line och fulöl (Y) men vart i helskotta har du fått tag i sånt fint trä i detta avlånga land?! finns ju bara typ gran hos alla handlare jag kollat hos :( lycka till. har subbat :)

[@Erikdidit]

Tackar! Ek brukar gå att få tag i. Men vill du ha något mer exotiskt så måste du höra med något lokalt snickeri.

[@elevierbeltran8703]

I liked a subscribed

[@HoangNguyen-yk1yn]

To use MDF for better sound.

[@elevierbeltran8703]

Nice speaker but I think that you don't know how to use a table saw and did you only use glue sticks to glue you speaker because that's not going to make a tight seal

[@Erikdidit]

Haha, thx, I totally agree, I'am a newbie. I try to use it safely. I also agree that the hot glue is not enough. I will seal it with silicone, the front panel is to thin to use screws. I haven't done it yet because I need to make the cabinet a little bit bigger. At the moment the sound isn't that great and I had a hard time fitting all the electronics inside.

[@andreaskusch9129]

Erik did it can you add all te parts? i want to know whst you use to charge the baterías thx

[@Erikdidit]

Amplifier www.ebay.com/itm/TDA7492P-AUX-50W-2-Wireless-Bluetooth-4-0-Audio-Receiver-Digital-Amplifier-Board-/122189015219?hash=item1c730868b3:g:K7AAAOSwux5YS5~W Speakers www.daytonaudio.com/index.php/nd65-8-2-1-2-aluminum-cone-full-range-driver-8-ohm.html Battery protection board www.ebay.com/itm/4S-30A-14-8V-Li-ion-Lithium-18650-Battery-BMS-Packs-PCB-Protection-Board-Balance-/232199446443?hash=item36102a5fab LCD www.ebay.com/sch/sis.html?_nkw=18650+battery+Lithium+Li-ion+tester+Capacity+Current+Voltage+Detector+LCD+meter&_id=400938078158&&_trksid=p2057872.m2749.l2658 Batteries www.ebay.com/sch/sis.html?_nkw=2x+3.7V+18650+Li-ion+3800mAh+Red+Rechargeable+Battery+for+LED+Flashlight+Torch&_id=361360771152&&_trksid=p2057872.m2749.l2658 Passvie radiator www.ebay.com/sch/sis.html?_nkw=2pcs+60+*+90MM+Low-frequency+radiator+Vibration+plate+Bass+Passive+speaker+DIY&_id=311759837566&&_trksid=p2057872.m2749.l2658

[@andreaskusch9129]

Erik did it that was fast jaja thx!

[@beamoth]

Everything was great until I saw the flyers cap

[@Erikdidit]

Haha :P who do you root for?

[@beamoth]

Erik did it Stars all the way !

[@HammerSeth]

Colar os falantes ao invés de parafusar é serviço de baiano

[@nathanielgaviola214]

Hey can i get a template of your work

[@Erikdidit]

+Nathaniel Gaviola unfortunately I don't have any plans for any of my builds

[@nathanielgaviola214]

Erik did it ok thanks

[@aapoorpana4267]

bilu

[@khanniazi3004]

why are you trying to copy Kirby meats audio by doing hand gestures be yourself man and love what you do

[@Erikdidit]

That is a pretty silly accusation, why would I do that? :P but I will confess that my speaker design is inspired by his.

[@khanniazi3004]

watch it at 3:58 :P