Ported 371xp first time in the wood

[@jasonmercer9962]

Sun’s Out Gun’s Out. Saw sounds strong. Maybe a bit lean at Idle?

[@aaronpowell4885]

It's definitely a snappy singer!

[@darrelladams9145]

Nice Tinman. Looks like you had a wonderful day there

[@thebradleysoncatbirdhill6849]

It is hardwood central here on the EC, Tinman. I cut nothing but oak, cherry, maple, and walnut. I know your ear is about a thousand times better than mine, but the low jet sounded lean. Otherwise, you have a killer, there!💪💪💪

[@mikecook2714]

I really enjoy your videos, Thank you for taking your time to share !

[@mikecox3659]

Yep, she eats pretty good ... all the best from Arkansas!!!

[@jimhofoss9982]

pulls good without dogging…thats how i like my saw to cut, too….success!

[@Northofsomething82]

Tinman! That saw rips! I’d say you nailed it. 👏

[@tinmanssaws]

I think this saw could be better lol

[@jakewhitney8201]

Hey tinman. I'm from New England, we definitely cut a lot of fire wood over here, and all hard wood! I'd love to see you do a 395xp. I just did a holzfforma 395 myself and was very impressed with it. I did a video on my channel about it.

[@tinmanssaws]

Got a 394 in a box here, I'll get to it some day....

[@jakewhitney8201]

I'd love to see it built. Nothing sounds like a big bore husky.

[@Sensei948]

@@tinmanssaws compresion 175 psi ?

[@captainkettel]

Man that saw rips... love the speed and power. Great build... You've done some strong work there...

[@tedanderson463]

I forgot to say... My 298xp has 99 cubic centimeters... Which is 6 cubic inches...

[@whatnowstinky]

From the numbers I thought it would be a dog, this and Ironhorse's 372 really show that the numbers are just one small bit of the equation.

[@tinmanssaws]

It's the shapes of the transfers that matter in my experience. This saw could be better but it's actually not horrible lol

[@whatnowstinky]

@@tinmanssaws the shape of the lower transfers where the air moves into the transfers? the shape of the upper transfers directing the air over the piston and setting up the swirl in the chamber? Or the mid transfer section where flow is consolidated, accelerated and turned?

[@stevetheriault4164]

GREAT JOB TINMAN ,,MY FIRST GOOD SAW WAS A 371 XP ,,GREAT SAW HOPE YOU AND THE FAMILY ARE DOING WELL BUDDY

[@tinmanssaws]

Thanks Stevie

[@stevetheriault4164]

@@tinmanssaws ANYTIME BUDDY 😁🇨🇦🇨🇦🇨🇦

[@danielzukeran7625]

Hey tinman it’s been a while, she sounds snappy indeed! I’m looking forward to the learning where all about to get from you digging into these 371/372. Hope the family is doing well! Thanks again tinman

[@tinmanssaws]

Hey buddy she runs good for sure!!

[@OzarkMidwest]

Tinman ✊️!! Sounds like an ironhorse gear drive, sweet build!!!

[@tinmanssaws]

Mr Ironman you're a good man Thankyou

[@tedanderson463]

Bro I got a 298xp.... And I couldn't find a brand new carburetor for it so I put a carb for a 272 on there..... You think I'll notice any differene? The 272 carbs were available.... From aftermarket for just dirt cheap... Saw runs good..... I heard the 298 XP and the 2100 are identical saws... The Saw shop mechanic... Told me exactly how to drill and tap for a compression release.. and where to put it.... I did... And I absolutely love this saw I've had it since 1989... A logger borrowed it from me and says that it is an absolute animal... The chrome-plated cylinder bore is still in mint condition... People tell me it's one of the most sought-after used saws.. they only made em for two years they are a souped-up factory Saw... Most guys couldn't start them and hurt their hands from cord pulling through their fingers... Because of their high compression...

[@tinmanssaws]

288 carb would pronlbably be better but a 272 carb should work. I have a 298 it's a stump puller.

[@tedanderson463]

@@tinmanssaws I feel like a VIP now because you made a comment back thank you

[@coolestguyontheplanet723]

Nice running saw

[@tdawg8605]

Nice saw. I was gifted one a 371xpg. It has a busted mag side case but other wise it's complete. Can't move on to it until I get that stubborn 272xp build working. Definitely getting the itch...😂. If anyone has a set of 371xp cases I'm look'en. Or the mag side at least. TC Mahalo Tinman 🤙🤙🤙

[@paulsheppard3158]

That saw really rips, I would say a successful port uograde

[@patthesoundguy]

Very interesting how the numbers work out. I like how you didn't touch the intake timing on this one, it's a good way see what happens with just raising the exhaust. I have a couple saws waiting to get built and I can't get to them for a while because I have to move and get a shop set up. I will have two identical saws with new identical cylinders and I might do one with only raised exhaust and the other with only lowered intake. It's killing me because I have so many experiments to try and I can't get to them for quite a while lol. And you better look me up if you come to the East coast to Nova Scotia,😉

[@darrelljohnson4658]

Fast saw

[@oldcodger1929]

I think if you put smaller dogs on it it would change the geometry between the bottom spike and the chain it wouldn't pinch it off so bad. Up to you.

[@tinmanssaws]

My rakers are too low lol

[@aussiehardwood6196]

He's right about the dawgs, to big....too grabby changes the whole performance of the saw. The old codger is right, the chain cut very well when the dawgs were away from the log, as soon as the dawgs touched the log the chain would stall. Thats classic 'too big dawg' problem.

[@tonyk4552]

@@aussiehardwood6196l

[@tat2edbadboy1]

Nice build

[@ericmaine7545]

That saw sounds amazing. Takes zero time to throttle up.

[@garengtutorial8923]

Keren mesin nya bos

[@frankz1125]

She sounds good. Bar is a bit overkill . Maybe a tiny air leak? Or just needs broken in. Cheers

[@jaspercooper7298]

Bar isn't over kill. If you've watched any of his videos he explains

[@AaronTheViking250]

👍👍👍👍👍👍👍👍👍👍

[@aj06bolt12r]

Saw cuts great when its "on the pipe" cant tell if its a little soft down low or if the chain is just really hungry.. Idle sounds pretty lean.. I like it! Can I have it? ;)

[@woodloveoutdoors]

Like a hot knife through butter she sounds nice 👍

[@leonardryan8723]

Check it boys and girls old 371 xp flying chips across Saskatchewan carry on boys and girls . 🤓

[@leonardryan8723]

Iiiiii iiiiiiii old 61 good old chainsaw Tinman 😊 17:44 I’ll come where your to , you stay where your at in the 709 lol . 6 more days been no more fresh lobster sandwich season close on 19 of June buddy . 😊

[@joshuasweet1532]

Hey tin man...the pants are gona get you nocked up hee hee

[@waydehamm7928]

TM , did you grind on the cylinder at all yet if you did I missed it , sounds good though with that much intake timing 👍

[@tinmanssaws]

Yep she's ported

[@bemoo5820]

What’s the clutch cover off of on that Saw

[@tinmanssaws]

572

[@douglascarlson9712]

If you ask me... Husqvarna is the Mike Tyson of saws. Stihl is more like Muhammad Ali

[@felixbinette9752]

I'm outa breath watching

[@tinmanssaws]

That's funny

[@coolestguyontheplanet723]

Comment from me today.

[@DemoFly]

keep that thing in a cage