Ported Echo CS-590 w/ 32” full comp! WOW!!😮

[@zeromark202]

Saw sounds excellent, great work!!

[@Kirks_Custom_Chainsaws]

Thank you! Saw safe!

[@WagnersChainsaws]

Get it Kirk you the man!

[@Kirks_Custom_Chainsaws]

Thank you brother!

[@barondurham552]

I know a guy that knows a guy and has a friend that has a stock cs-590. Awesome build, you know that I've been waiting to see you build this for a long time and the results look fantastic. You know I can't wait to run it

[@Kirks_Custom_Chainsaws]

I’ll bring it down to the wood yard as soon as time permits brother! You can run a couple tanks through it!👍🏻

[@IndianaDoug]

I love these torquey bastards, for the price? Impossible to beat for a strong firewood saw. Good build Kirk👍🏻

[@Kirks_Custom_Chainsaws]

Thank you Doug! I’m shocked it did as well as it did with the 32”.😳😁😂👍🏻

[@diggindiggenit6540]

wow little monster there

[@Kirks_Custom_Chainsaws]

Thank you!

[@902hand7]

Nice build - she pulls that 32 no problem. Were you able to do any chamber work with the really short skirts on the piston?

[@Super-Dave-Outdoors]

Ring of death shuts down chamber work before the piston skirts do. You can take around .020" out of the chamber. I zero mine out and set squish with chamber work, havent had one free port yet.

[@Kirks_Custom_Chainsaws]

Like Super-Dave-Outdoors said, chamber work is limited. I did cut the squish band about .024”. but I couldn’t really go any further because of the short skirt on the piston and fear of freeporting.

[@Super-Dave-Outdoors]

​@@Kirks_Custom_Chainsawsif they had a better chamber, carb, and coil they would rival a stihl MS361 in porting potential

[@902hand7]

@@Super-Dave-Outdoors Thanks for the info

[@902hand7]

@@Kirks_Custom_Chainsaws Ditto

[@robert4027]

wow. can I have part number on the 32in bar. I want one for my 590 timber wolf saw.... mine is stock but with a muffler mod. .. these saws have amazing torque for the money

[@Kirks_Custom_Chainsaws]

Thank you! I don't have the full part number for that bar because it is actually a Husqvarna large mount D009 with an adapter I made. The tail pattern you need is a D176 for this saw. I hope this helps. Thanks for commenting, good luck & saw safe!

[@robert4027]

@@Kirks_Custom_Chainsaws thanks very much. 👍

[@JonathanCox-u4r]

What numbers did you use.

[@Kirks_Custom_Chainsaws]

106.7 126.7 80

[@lonnieholbert8898]

No bog with a big bar, well done. Whar numbers did you go with. I planned to port mine until I run it and then Im wondering "why bother". Great saw

[@Kirks_Custom_Chainsaws]

106, 127, 80. I’ve been thinking about going back in and changing them, but I just don’t have the time. And, I don’t think I’ve run that saw since that video. 🤦🏻‍♂️ Way too many other saws to run.😂