Powder Coating A Cup In My Garage

Powder Coating System: amzn.to/2USakeM
Powder coating is easy the results can amaze you. We used candy lime green, candy teal, and silver sparkle clear on this cup. You can coat anything metal such as a Yeti cup or car parts. You shouldn’t use your kitchen oven to cook the cup, we used a meat smoker.
Disclosure: The products listed above are listed using affiliate links. As an Amazon & eBay Associate I earn from qualifying purchases. Affiliate link purchases help fund projects on this channel. Thank you

[@ChillFrost]

I knew it, you're Rescue & Restore!!!!!!!

[@juanchopancho8802]

I knew it!!! that oven !!!

[@bcidernable]

My wife had one of those large Yeti tumblers that she tossed in the trash because the paint was peeling. I grabbed it, stripped it, and coated it the exact same way, but with Candy Teal, and Candy Raspberry, and of course the Silver Sparkle, because that just makes it look dope. Well, now she's mad at me because it's mine now.

[@sanibunny2138]

😂😂👍🏻

[@notavailable9479]

lovely

[@SD-vy7gj]

Lol you git.

[@johnfaulk7775]

Really miss your classic and antique toy restorations!

[@leesuschrist]

I LOVE the idea of using a smoker. I don't have enough room for a full oven in my garage, but i think i could fit one of those somewhere just fine. Beautiful results on the powder coating, by the way!

[@TomRFL]

First time I have seen powder coating done. Not what I thought. Very educational. Thanks.

[@kevinlatinski826]

I’ve been powdercoating for 19 years and hve a 10x10x40 foot batch oven . I must say . This is very impressive

[@robertprice9052]

Great work. I use a stand I made from a metal gang box and a piece of all tread. I put a ball of aluminum foil at the top of the all thread to stabilize it. I find I don’t get the rough edged on the rim. Just my .02! Keep it up!

[@marshannajohnson8584]

Oooh, I love the colors and sparkle on your cup!

[@aussierestorationsmods2715]

This was satisfying to watch, Especially when the sticker came off in one hit haha

[@mattbentley8958]

Impossible, those stickers never come off in one piece.

[@onemansgarage6203]

Heat baby! He had a heat gun on it or put it in the oven for a spell. Heat works every time.

[@jonny555ive]

#TRUTH

[@VEE0034]

​@@jonny555ive #LIES

[@stabbincabin6802]

Could you please do more random coatings of things like hammers or saws. The process is so fun to watch !

[@vivianezm5485]

Isso é verdade. É mesmo gratificante! ❤

[@johndowns4161]

The most perfect to the point video in years

[@patrickchristie82]

YES. Another dude with a Cricut! I always felt like the only once since they are marketed to crafting women but they are great machines. Nice cup too

[@ahuertas69]

Love the demo, that sparkle clear definitely brought it all together 👍

[@slpn9t]

Makes me want to powder coat every little part on my Moto. Looks so good

[@Mrwilson98]

Powder coating is a very fun and interesting job!

[@cajunsmurf4354]

Awesome. Something about those colors that i enjoy. Reminds me of the 80s and early 90s beach stuff.

[@eddietapia3815]

This was great video. I do all kinds of projects at home and THIS one seems like something I’d like to do at home for myself. Great video brutha.

[@Daniel_Plainview]

Never fade dark over light.

[@livc1981]

That's such an awesome cup!!! Would you ever make more and sell them?

[@Deliveredfromevil]

That’s a StarBucks knockoff and it looks nicer to me!!! I freaking love it!!! I would love to see more videos of of stuff like this.

[@renees766]

Man that sparkle is what's up!

[@cooperbybee4308]

Wow! That was so cool how you peel that sticker off without it ripping

[@pamelasmith7740]

Nice. Try some Harley Davidson orange and black. Maybe a bit of Goth black, purple, burgundy or darkened/shadowed teal or aquamarine. I'm more Halloween than Easter.

[@3Crows3]

Great vid, I never thought to look up how to powder coat..

[@ianvicedomini2648]

Awesome 👍 the finish is amazing and the colour is really nice. great video mate 👍🏻

[@pfadiva]

Oooh, shiny!

[@MikeTheMaker1]

That’s a hot color scheme.

[@bigvin7602]

That’s actually pretty awesome.

[@mikeshem7665]

Awesome job on the cup! Great video👍👍

[@Tracyminor1223]

Awesome finish I want to get into doing this to firearms and other applications looks great

[@AlexisMartinez-nl5py]

im pretty sure you can sublimate on that and put a nice design

[@MaRio_1400]

Amazing! Well done, sir!

[@kiannakaminski986]

So......you have come back after all these years?but this video for me was made 9 months ago so you should post more! And your like really amazing,and lots of people love you!

[@MILLYNWILL]

Love this great video. That cup came out amazing.

[@dalvatorres6114]

Faça mas vidios adorei sou aqui do Brasil e gosto muito dos seus vídeos 😊

[@jimmyramirez8844]

Can you make a video of all your set up for powder coating

[@eyecan8]

You’ve got good taste!! So what truly excites you? I’ ll wait😂

[@jcdahippie]

This makes me want to actually buy something from Amazon.

[@kevinlatinski826]

Side Guy check out Easton powdercoating .com

[@THESICKSILVERADO]

Nice job..good video!!

[@unclechum2305]

That was really cool to watch

[@annortiz5905]

Beautiful job!

[@chrisC052]

I have a question about powder coating. Can you mix two different powders together, say to darken a certain color like you can in model paints?

[@oldskoolmedia2264]

I would love to have that

[@kerryparks6744]

Sweet cup!

[@nickrogers3111]

cool gotta love chicago electric!!

[@jacobhornsby5579]

Awesome job! Did you have issues with spray getting on the inside of the cup, how do you mitigate that type of over spray? Also, can you powder coat clear over the top of the decal?

[@RayTrent01]

Jacob Hornsby I wouldn’t think you can seeing how it’s gotta go in a 400° oven for 10 minutes. Would probably melt the glue on the decal

[@danielhurst6585]

You can powder coat over a decal yes. You just have to lower temp down and a longer cure time.

[@jaybama72]

The make a low temp cure that works great over vinyl.

[@imjoey9456]

Professional and up

[@AgeBjjsteph]

That was amazing!!!

[@shaggins3547]

Looks great, nice setup.

[@sxysweetyungthang]

Gorgeous!!

[@nancysdsk]

Wow! Neato 😃

[@onehermit8498]

Very cool! Thanks for the video.

[@hierroglyphic]

So many steps for me to compromise and screw up! I'd love to see how my cup would have turned out!

[@Carolina-Girl-214]

So cool , I love it.

[@emeraldzebra9360]

This is so cool!

[@masspeedcustomss2542]

Dope and good vid !

[@MaNdojjr3]

I would’ve put the decal first then started coating it... in the end the logo turned out to be silver just like the cup

[@TowMan127]

Nice 👍

[@diecastdungeon8970]

Great video !! Thank You !

[@kasslove111]

wow never seen that before

[@simoner4779]

😯 🤩🤩🤩 Perfect! 👍

[@YknotLearnall]

Nice! The cup came out great. I hope you don't mind a couple questions. Does spraying on the foil like you did shelf and putting poth in the oven. Did the cup stick to the shelf covered with power coat or cause any issue? Very cool oven - what make is it?

[@wekivaaquatics5918]

That's a smoker. You can get them used in good condition for less than $75.

[@johnsp70]

Too good

[@FarmerFpv]

This whole time I thought you were going to powder coat a sticker, I seriously need to lay off the eucalyptus leaves...

[@QuietMindful]

Great video sir! What is the oven you used? Is it an electric smoker or something like that?

[@Michael-lo3ht]

I saw the door as he closed it for the clear sparkle. Looks similar to this one. Unless he got a larger version of it. www.homedepot.com/p/Smoke-Hollow-30-in-Electric-Smoker-with-Window-30162EW/206288940

[@kevinlatinski826]

Ground that rack and you would use a quarter the powder

[@pelletshoter]

Awesome job. Why no add more video with painting ?

[@TechTalkTobi]

almost perfect - setup, work and cut. But .... aahhh ! there is a air bubble at the "B" ... ;)

[@conniebueche3989]

I don’t see a logo

[@KonaUte]

i want to paint my whole car with this, its a small modular car, so i dont need big industrial bake

[@simoncorriere8209]

Ермек Ермеков it can be cured with lamps

[@xavierolle]

Oh boy!...

[@anishamm685]

NICE NICE NICE

[@PlayafromtheHimalayas]

Hold up, is that a damn electric smoker? 🤣. If it works it works

[@ruslanmalkov7172]

Cool!!

[@theberge113]

Wow!

[@Max.Mustermann.]

sorry stupid Question here :D °F or °C ? :D European here Haha :D if its F thats nothing ... about 200 °C which would be easy to do with an Oven from a Scrapyard :D great job i love the "fade" / "transition" between the colors

[@jwlast-fo7bh]

It is °F, I used the same harbour freight machine for some atv parts and baked it in a scrap oven, worked perfect. Dont eat out of oven again though. This guy did a really good job as well, I love those colors!

[@Max.Mustermann.]

@@jwlast-fo7bh Sure Thing with the eating xD thats why i Said one from the scrapyard because it wouldnt Matter :) have an good one o/

[@prostreetgsxr]

Looks good until you look inside the cup

[@daddymikegaming5813]

Awesome

[@catc17]

What is out gassing?

[@BLAZEPSI]

NicE! I think color will pop ever more with white base coat...

[@nicstr28]

Looks like the colors are translucent so u can get the metallic look to show thru the color.

[@saraross8396]

When the store just doesn't have a color of cup that you like. Or: "That's a cool cup, where'd you get it?" "Harbor Freight." "Really? I've never seen one like that there." "Well, I did tweak it a little."

[@nanoblasting]

👍👍

[@shredct3118]

500K more to go, and then start selling them. 👍

[@rudyflores9395]

Thanks 4 this video awesome 2 the point and NO BS a few question no sanding was required next you can over spray and then bake last is where do you get your powders. How does the harbor gun would it be good 4 starters again THANKS

[@angellashbaugh3816]

Do you have to have the gun thing or can you apply it by shaking it on ?? Your cup looks AMAZING!

[@kennyroohr6631]

Need to have the special gun to spray the powder. It puts a positive charge on the powder and a negative charge on the object therefore making the powder attract to the cup and evenly cover the whole thing.

[@elektrobear2027]

How many times have you zapped yourself? I did it at least 10 times before I learned 😂

[@jaystewart6396]

Cool

[@1336kingsville]

Kinda missed the most important step. Shoulda took a scochbrite pad to the metal to scuff it so the powder has something to adhere to. Especially being stainless

[@davidchereneimmel8820]

It was already a brushed finish it would adhere fine with powder coat.

[@FourWheeler575]

There’s no need to scuff it up. I’ve probably powder coated 200 cups now. The paint will not come off. It’s a pain to strip them If you mess up.

[@1336kingsville]

I sandblast stainless parts for Powdercoating every day to help adhere power to parts

[@FourWheeler575]

erwin snufelguss for parts that’s makes sense. For these cups I’ve never had an issue. I even had someone try to sandblast two cups I messed up on and it didn’t work, though he was using glass beads. Wire wheel or a chemical is about the only thing I got to work. I don’t use the chemical anymore.

[@bobbyblank6916]

How durable is the powder coating when applied to a mug? I did the oracle vinyl thing...they didn't last a month. If powder coating has the durability needed to skinjob a mug, I'd try using the vinyl as a stencil for a powder coat layer and peel that shit off immediately. That vinyl stuff seems better suited for an old lady's scrapbook or the side of a plumbing repair truck. Humans will probably discover alien life outside our galaxy before creating a sticker durable enough to withstand the rigors of a mug's life.

[@kennysylvia773]

Cool stuff what kind of oven can you use

[@JavaEntity]

I'm curious about the oven / smoker that is used here. Where to buy and do they come electric powered with the glass door?

[@MzLuckysLavishVixens]

Question after the first coat of cooked powder. Can you add vinyl do a second coat then remove vinyl so first coat shows thru then cook and it be a matte colored cup with glossy showing thru where vinyl was removed. Like a peek a boo cup?

[@sammantil6342]

janie trevino I don’t know how well the vinyl would hold up, but there are high temp silicone tapes you can get that I’m almost positive could go through a cricut, so what you’re thinking of should absolutely be possible.

[@sukmaadi8649]

400° celcius or fahrenheit

[@jonny555ive]

What meat smoker exactly did you use. I would like to get into this but I want to do it properly. Thanks in advance. 👍

[@dejugulators]

Seahawks fan??

[@BidCrushr]

Which meat smoker did u use? I would like to buy the same one for my projects

[@freebird1963]

its right there in the video. smoke hollow.

[@NoName-zz9ls]

Cure schedule 10 minutes at 4 oof

[@danielhurst6585]

Take the yellow tip off your gun. Get better results and not as much overspray.

[@BLOODXEAGLE]

👍🏻

[@angelmendozagonzalez6849]

Is that oven specific for that process or its main purpose is other?

[@matthiaskalweit380]

How did u cover the bottom ? I dont see u apply any powder to it but in the end the is. 400 degrees arent a little much? tho I only know at most 220 temperature for the powder colors application's