Powder Coating Oven DIY Build (How To Make)

[@bizarreandbrilliant]

Here is a condensed video of my DIY Powder coating oven build. You can see the complete 3 vid series at kzbin.info/aero/PLM5aAjIo5X2x3mYessFB-_ynmP8h68dIG

[@ralphgregory7616]

Thank ya kindly ✌️

[@engineeruk8667]

This is how people really do become successful. Educating themselves, grafting and ultimately providing something that most other people cannot. Very nice.

[@mciarlillo]

2 years later and this has been extremely helpful! Thanks for the upload and absolutely amazing restorations.

[@bizarreandbrilliant]

You're very welcome!

[@Theyellowchild]

You heard the saying jack of all trades master of non,you appear to be master of all trades bloody brilliant

[@gaasyendietha5070]

wow this guy is intelligent. i was here to find a solution to recoat the inside of my oven and this guy just build one almost from scratch

[@leeroberts5496]

That oven has worked a treat.

[@wyldeman]

the valve cover was amazing!!

[@threestarsandasling]

Good lord, those restored pieces are beautiful! Fantastic build brother! Thanks for making this video! 😎👍🏼

[@Temuba]

Amazing job repurposing and doing it yourself. Love the restos.

[@newtronix]

The powder coating ones are my favourite. The ovens great. Given me an idea for a perspex oven that I need.

[@davidedgerly]

Brother awesome Hack!! Your idea to use the glass... GENIUS!... You designed for safety as well... One of the best builds I've seen so far for a balance of simplicity and safety coupled with longevity... Cheers Mate well done!!👍👍👍

[@barbarawiddowson635]

Blast from the past Martin.You have also had a transformation since then lol.Stay safe.

[@a11csc]

nice recap martin

[@killerjms21]

omg, i thought that was you. i started watching you a few years ago but you was doing htv. you are the one that got me into doing that stuff.

[@bizarreandbrilliant]

Nice one. Check out my Retrorestore channel and Butlers Empire channel too to see what I get up to now.

[@ralphgregory7616]

Well done !! It's on now baby,let the component collecting begin 👈😎👍

[@paulwood7798]

Cracking vid Martin. Could watch you all day.

[@adeh503]

That little amersham looked awesome 👍

[@LZDEN]

first class work Martin well done.

[@alandykes2519]

Trip down memory lane fantastic always thumbs up for you Martin 👍👍👍👍

[@bizarreandbrilliant]

Thanks 👍

[@soggybawsmoto]

Exceptional! Great video

[@skoalonguys6788]

That took a lot of time and effort its enough to want to replace old stove heater and make a new large cabin heater for powder paints!! Great job 🍻🤟👍

[@davebrittain9216]

RetroHax that was the first time seeing any of your videos and I have to say that was very interesting! Thanks for sharing it with us.

[@bizarreandbrilliant]

Glad you enjoyed!

[@filip6472]

Nice mate.Well done.

[@normsmowers4758]

Definitely worth watching that again top job Martin 👍

[@bizarreandbrilliant]

Glad you enjoyed it

[@ryancrume]

nice work man looks great

[@caldwell1981ac]

This is brilliant. Can you please make one about your powder coating booth buddy?

[@classicgamer4451]

You carnt bet powder coating things such a nice finish 👍

[@bizarreandbrilliant]

Very true!

[@martyclack8782]

That is a nice unit you made works awsome great job

[@bizarreandbrilliant]

Thanks 👍

[@ElektroTechNL]

so nice that powder coating. awesome i hope to see allot more. greetz from the netherlands

[@bizarreandbrilliant]

Thank you! Cheers!

[@andy_v4443]

BIG THUMBS UP MARTIN

[@rickyfireworks]

Wow! Very very nice bro!!👏👏👏👏🔝🔝💪💪🍻

[@bizarreandbrilliant]

Thanks ✌

[@tomassmith7686]

Just excellent! Inspirational too.

[@bizarreandbrilliant]

Glad you enjoyed it

[@cathybenson5119]

I always like your work, mate. 👍👍👍🇦🇺🇦🇺🇦🇺🦘🦘🦘

[@andrewsims8221]

Wow you do some amazing work and the oven what a great idea 👍

[@damienobrien1463]

fantastic video ty

[@enriquelopez7050]

Hi, Nice to see you'll well, be safe

[@toyota218921]

Excellent stuff now I'm going to do the same

[@raynyhus2026]

Great build, been contemplating one myself.

[@mcbridemotorsports5788]

Amazing work! Enjoyed the video

[@bizarreandbrilliant]

Thanks a lot!

[@4legdfishman]

New subscriber! Nice oven! The powder coating and restorations look great! Thanks for sharing.

[@bizarreandbrilliant]

Thanks for the sub!

[@theropesofrenovation]

We need feel-o-vision!!!! Cool

[@andrenovelliromansl]

Great idea!

[@999thenewman]

Great use of resources.

[@JoseOrtiz-zx8sf]

I would have clear-coated those antique pieces to seal in that nice patina :).

[@demoking1422]

Good job

[@AtwillProductionsLLC]

Great job!!

[@karlbradley7248]

Great job 👍 is that a small extractor on the spray section you have there

[@mftmachining]

excellent job, wow

[@bizarreandbrilliant]

Thank you! Cheers!

[@benjaminbuse]

klasse gemacht Grosses lob

[@banger220]

Cracking job as always Martin, great to have a review combined like this. As I mentioned before you inspired me to get my older version of the same PC system back up and running as I had been hampered by the size restriction of the domestic over, then took on redoing a conversion of a office cabinet and then powder coated load of items for the kit car rebuild. Presently sand blasting some bench ends that will get powder coated with some colour from electrostatic magic for a work mate, keep up the great work you 2.

[@bizarreandbrilliant]

Nice one Richard. Cheers Martin

[@Messyapocalypse]

Unbelievable 👍🏻

[@krismcleod272]

Quality 👍

[@alexandreliquito3584]

Mate ! Thanks for the explanations and for sharing your set up. Im following your Ideas, and trying to make the same... why haven't you used the 3 glasses from the oven you have used ?

[@bizarreandbrilliant]

It was my first build, I would probably make modifications if I did it again.

[@smore2020]

Inspiring, this is my dream hobby ones retire, I can't wait to set me up for this. Anyone knows where to get powder coating i Europe? I'm in US now and it's easy here, but moving back to Europe

[@wootzemperoar1223]

Why it feels like i am going to heaven??😅

[@alexandreliquito3584]

And also I am using used materials...does it make a big difference if I use both rockwool and glasswool ?

[@popsshops]

Nice job. What's the total volume inside, the wattage, and the time to temperature? What's the skin temperature where it's insulated?

[@All-rc804]

This is a awsome vid👍 just 1 question tho. How does the oven no when its up to temp? Was the a thermostat that came with the oven?

[@bizarreandbrilliant]

Yes it is bud but I also keep a check on it and when its up to temp, I lower the control.

[@retropol4316]

Nice

[@leerevell5998]

How did you do the preparation? 🤔👍

[@leerevell5998]

Give a👍 but no reply not really helpful 🤔🤦

[@markkoons7488]

Were you able to remove and reinstall the Amersham decal, find a duplicate, or mask it off? Wouldn't have thought it would survive the heat.

[@bizarreandbrilliant]

I made new ones bud

[@markkoons7488]

@@bizarreandbrilliant Well, that ability is something I'll have to learn about. Any suggestions about where to start?

[@bizarreandbrilliant]

Try waterslide decal paper on your home printer and then lacquer them with rattle can varnish.

[@markkoons7488]

@@bizarreandbrilliant Thank you for the introduction to this technology.

[@kyledale201]

Martin this might sound a silly question but how did you manage to get the grill element and the oven element to work at the same time? Your video and ideas are absolutely brilliant mate keep it up

[@bizarreandbrilliant]

This cooker had a dual oven/grill I think and no extra wiring was needed. It all worked off the original controls.

[@johnpearson6232]

Great video I have just subscribed, I'm a fabricator and manufacture things and sell on Ebay, Amazon, Etsy etc. Not sure if making an oven will save me any money. Is the running costs high? How long does it take in the oven? Who supplies the powder?

[@bizarreandbrilliant]

10 minutes on average, Don't really notice the running costs as its a hobby. Powder suppliers is in the video description.

[@killanoa]

do you sandblast?

[@bryansharpless6590]

what size cabinet is that?

[@MrPlaiedes]

That music... did you also discover an alien signal?

[@bloggs4214]

What powder coating gun is that being used?

[@bizarreandbrilliant]

Its in the description

[@andrer.mallet2410]

I'd love to see how the glue on all that tape is going to withstand 350 to 500 degrees for any length of time...

[@bizarreandbrilliant]

It holds up well and its not affected after 2 years+

[@blackmambastealth]

What tape you used inside the oven?

[@bizarreandbrilliant]

It's aluminium duct jointing tape.

[@g0une1]

Strange feeling of DEJA VU.

[@darrenmeears4667]

Wonder what's happening gone quiet hope all is well 😷👌

[@bizarreandbrilliant]

Decorating Darren, back soon on Retrorestore.

[@darrenmeears4667]

@@bizarreandbrilliant Nice one had me worried for a minute your the only thing worth watching 👍👌👏👏👏

[@williamchristmas7628]

How much to build me one

[@seanc7935]

Build yourself a sand blaster

[@bizarreandbrilliant]

I have one.

[@whazupmike]

6:50

[@whazupmike]

Great job on the oven.

[@GadgetGazza12]

Pity you didn't get Chris old one also mate. It would probably been a simple fix for you

[@lescoe]

You need more colors.

[@bizarreandbrilliant]

I have a whole range of colours. This was just a snap shot of what I have done over the past year.

[@ZombiePanda1776]

You need a new soundtrack lol. I fell asleep and had weird dreams.

[@p2wfreddiee]

No way a rims fits

[@bizarreandbrilliant]

Depends on the size.