Power Cord Adaptors, Splitters, and Power Sources Explained...

For a better quality video, check out this new one that we just posted HERE: • Power Cord Adaptors, S...
Mytee 5003 3-Prong Electrical Converter:
www.cleanprosu...
Mytee 5004 4-Prong Electrical Converter:
www.cleanprosu...
🚀 Clean Pro Supply sells professional cleaning chemicals, industrial epoxy products, tools, equipment, extractors, truck mount systems, concrete grinders, shot blasters, floor scrapers, and more to cleaning professionals and epoxy floor installation contractors.
⭐️ Client Testimonial: “When I started my business, I spent hours online searching for equipment. Every company wanted to charge an arm and a leg for shipping… Clean Pro Supply didn’t charge me hardly anything. They sell the same excellent equipment everyone else does but marked down a lot cheaper. Also, I was denied financing equipment at another company but didn’t at Clean Pro Supply.
The customer service is the best part of this company. Rachel, whom I’ve worked with, has had an answer for everything and always has the best advice. Five stars from me!!”
💻 Learn more about our Events & Training. www.cleanprosupply.com/events-training
🔥 Don't forget to like, comment, and subscribe for more valuable content on digital marketing! Let me know what questions you have, as I'll be answering questions in the comments 🗣
✏️ Contact Us: www.cleanprosupply.com/contact-us
👍🏻 Like me on Facebook: cleanprosupply
📲 Follow me on Instagram: cleanprosupply
For more tips, tricks, and other amazing products, visit our website: www.cleanprosupply.com
💡 DISCLAIMER: Any advice I give is based solely on my experience and research. There is no guarantee as many variables will impact your success. Everything stated should be taken as an opinion.

[@octoberfox3399]

Man super helpful video! Looking at getting into the carpet cleaning business and finding out that all the super powerful machines are in the states because our outlets are way to weak over here in Canada. So see that there's a splitter that will work, all hope is restored. Thank you so very much for all the help.

[@CleanProSupply]

Hi Dylan, apologies for our late response to your comment. We are thrilled to hear that our video was helpful for you. Please let us know if there is anything we can do to help in your new venture. If you have any suggestions for other videos that might be helpful as you break into the industry?

[@brianamendez4829]

Thanks for the info!

[@barbaraadams8219]

Thank you. I was so confused before your video. Great job.

[@CleanProSupply]

Glad we were able to help!

[@robertcharles5528]

Great video! Like the floor very much.

[@thehighriseconstructionob9679]

Camera man need to get closer please. Its hard to see.

[@CleanProSupply]

Apologies for the rough footage here. We have received a lot of feedback about this video, so we decided to reshoot it with better resolution and better audio quality. You can check it out here: kzbin.info/www/bejne/bJTch6N6e6ameZo

[@rjeepster8640]

The distance the camera is away makes the video useless and you can’t tell what angle or what prongs are on the ends of the cords

[@CleanProSupply]

Hi, we appreciate the feedback. We recieved a lot of feedback that is very similar to what you have shared. So we decided to reshoot this video with better audio and resolution. You can check it out here: kzbin.info/www/bejne/bJTch6N6e6ameZo

[@benkanobe7500]

Can everyone else hear him? I can barely hear.

[@CleanProSupply]

Hi Ben, apologies for the audio quality. We got so much feedback on this video that we decided to reshoot the video with higher quality resolution and audio. You can check it out here: kzbin.info/www/bejne/bJTch6N6e6ameZo

[@shannon6815]

Cany really see what the different plugs that you are talking about. Would of been nice if you could include a few close up

[@CleanProSupply]

Hi Shannon, we hav recieved a good amount of similar feedback, so we decided to reshoot this video. You can check it out here: kzbin.info/www/bejne/bJTch6N6e6ameZo

[@jimmys511]

I have a Duramax 12,000 EH generator I want to hook up two refrigerators and two furnaces can you please help me out on the best way to use this generator I’m new with this thank you

[@vitoscatigno4207]

Can we get a little further away with the camera, also check the sound!

[@CleanProSupply]

Vito, thanks for the feedback. We have received a lot of great responses to this video and decided to reshoot it with updated resolution and audio. You can check it out here kzbin.info/www/bejne/bJTch6N6e6ameZo

[@kennyray116C]

If you only using one side of the 30A splitter, can you use more than a 15A load?

[@rjeepster8640]

The video doesn’t show a close-up of the end of the cord they all look the same from that distance sorry buddy but it’s useless

[@Icutmetal]

Strange. I could see it just fine. Maybe it’s your eyes that are useless.

[@vincenthorvath6142]

I have a generator and on it has I believe a 110 and I need to use it for my home.any ideas please I need help

[@izzymacc]

I’m still confused lol what plug I need if I need to power a portable heater and breathing machine and a 3 lights

[@rickhealey3941]

Couldn't see well enough. you should of zoomed in closer.

[@CleanProSupply]

Hi Rick, this video has been rather popular on our channel, but we realized that there were a lot of issues with the way it was shot. We shot an updated version, which can be found here: kzbin.info/www/bejne/bJTch6N6e6ameZo

[@rogersavoury2384]

Hi nice video a question I have a steel bending machine and the amp on it is 30 Also I have a generator which is 8000 to 10000 can I use the 220 volt on it to power the machine?

[@mountainman5025]

yes

[@jimmys511]

Where can I buy that 50 amp splitter?

[@mattg8787]

#CleanProSupply im getting a 6k diesel light tower and it has (1) 110 plug and a 110/ 240 30A. is there a way i can put in a 30A rv plug by ether using the 240 or putting in a new plug.?

[@Rdubweb10]

Is it possible to run a commercial treadmill from your dryer outlet??

[@suburbanprepper2734]

I got a 7000 watt generator for a great price. It only has 4 110volt 20amp outputs. What are you thoughts on using a combiner to use as emergency back feed source? To a dryer plug.

[@tsant6591]

Never back feed into a 220 outlet. It'll burn your house down.

[@Z-Ack]

How will it burn anything down? If you shut main breaker off then plug into the drier outlet than it will still be going through the 30 or 50a breaker to backfeed both phases of the panal box.. if you have a 30a breaker on a 220v circuit that breaker will trip if 30a is passed over either leg or both. It doesnt half it per phase. And the fuck fuses are you talking about? You still got fuses instead of a circuit breaker panel? Mr not up to code.. and even so, unless you remove the fuse and shove pennies in instead than u will still be going through that fuse.. what the fuck you talking about? I mean even the generator 90% of the time wont have any fuses on it at all, only either a breaker or an internal overload self resetting breaker. I mean maybe the thing will have a thermal ovetload that could trip but even those reset most of the time on their own.

[@Z-Ack]

If you got a generator that only has 1-30a 110v and a duplex 15a 110v, can you remove that and wire it to have only 1 -30a 220v out by splitting the phase using the hot on the duplex and hot on the 30a without hurting the generator? Reason being i want to backfeed to a 50a 220v outlet on the house so it will give the entire breaker panel power through the one plug. I dont want to have to run 2 cords to each phase on the panel to make everything hot.. and yea i got a lockout not worried about safety as all cable ratings are adequate.. would use an 8ga 20 foot cable back to breakr box..

[@mattstivers1683]

I'm wondering the same thing. I'm wanting to run my 20 amp 220v air compressor from my generator it's 4000 watt with two duplex outlets and a 30 amp all 110v. I know you can do this coming off the grid but not 100% sure if the generator would support it

[@Magnus_Magnusson_702]

Why is it so incredibly difficult to find a 5-20p to 5-20p extension cord? I must have ordered about 16 of them by now and had to return every single one of them because they're all 5-20p to 5-20R, I don't get the taboo with just creating one you can charge your Tesla with without one end being the wrong damn end EVERY SINGLE TIME!!

[@darrellfether8964]

Can you plug into both the 50 amp circuit and the 30 amp circuit at the same time?

[@MotoJB]

Completely unusable video for me, can't hear. Volume is at 100% too. Fail.

[@CleanProSupply]

MotoJB, we completely agree. We loved the content of this video when we shot it, but realized that the audio was likely preventing many people from absorbing the material. So we reshot the video with updated audio! Check it out here: kzbin.info/www/bejne/bJTch6N6e6ameZo

[@dwaynet2184]

Well you explained the obvious, but I was about to ask a question and realized the last comment was 1 yr ago and it didn't get answered. Oh well move on.

[@CleanProSupply]

Hi Dwayne, we have actually filmed an updated version of this video with MORE information. Check it out here: kzbin.info/www/bejne/bJTch6N6e6ameZo