Power kayak Motorizado - Motorized Outboard Motor Kayak

Mis Kayaks Perception Tribe 11.5 motorizados, el naranja usa un motor Nissan 3.5hp y el amarillo un Mercury 3.3hp, este video fue grabado el primer día de pruebas, se probó el soporte de motor, el acelerador del motor y el brazo de dirección, todo funcionó a la perfección como lo puedes ver.
En otros vídeos detallaré cada parte del kayak,
Video showing my two perception kayaks tribe 11.5 motorized with outboard motors Nissan 3.5hp and Mercury 3.3hp, this was the first day tests we did, the motor mount, throttle control and steering bar worked perfectly.
In other videos I'll show each part of this project.

[@MsSaint1962]

This is fantastic, don't listen to the knockers please.. I have a disability and love fishing. I use a 14 foot canoe with a 2 horse power motor..runs good, but due to my illness the canoe can be difficult for me to lift in and out of the water. I have been thinking of converting to a kayak, but trouble paddling due to illness. This idea is perfect for people like myself..and lots of fun too it seems. I cannot afford a big expensive boat but can enjoy life with simple things like this.Thank you

[@hybridforex]

I know, I hope you made it, sorry for take me to long to reply, now I'm in Forex projects and it consumes all my time.

[@hybridforex]

Gracias a ti por comentarlo y agradecerlo, me llevó mucho tiempo descubrir como hacerlo y finalmente pensé que debía hacer un vídeo para compartirlo y otros pudieran beneficiarse. Un saludo!

[@AM-wg6vt]

Gracias por el video Claudio. Me ayudo a adaptar un 3.3hp Mercury a mi Hobie Pro Angler 14. Tus videos fueron de gran ayuda para resolver los problemas del kill switch y el throttle control. El unico detalle que no funciono fue tapar el shifter para que el cable bajara las revoluciones del motor, so lo resolvi con un spring en el acelerador estilo maquina de podar.

[@hybridforex]

+Manuel Perez “yakfishingtexas” Hola, me da gusto que te hayan servido, para que el cambiador pudiera bajar las velocidades había que retirar los empaques que mantienen el acelerador en su lugar, de tal forma que no hubiera resistencia ni para bajar ni para subir, pero si, con un resorte funciona mejor. Saludos!

[@AM-wg6vt]

Lo hice, pero no trabajaba consistentemente, so use el spring para forzarlo a su posicion original de velocidad baja.

[@hybridforex]

+Manuel Perez “yakfishingtexas” Excelente, en mi caso en ambos motores no fue necesario el resorte pero si, es lo ideal. Felicidades.

[@hybridforex]

Hola Adrian, gracias por tu comentario, fuiste de gran aporte para la realización de este proyecto, la flota sigue creciendo, que siga así!.

[@valhemp]

An enjoyable video. Looks like you had lots of fun. Very enterprising. We too are in process of attaching a 3.6hp outboard on our hobie kayak. Good work

[@hybridforex]

+Valda Hempel Thank you it's a lot of fun in any way. Greetings and good luck!.

[@hybridforex]

Another pessimist/negative fellow?, the US economic crisis it's passing by, you are doing great, don't worry, soon USA will be number one again, heads up!. Don't think in terms of "took out", but in "ADD up", I ADDed to my kayak, exciting, speed, emotion, unlimited exploring, etc. If I want "peaceful", I just turn off the motor and use my paddle, what more can I ask?, I have it all in one piece of plastic!.

[@MrJohnjohn04]

come to Texas... i live on a small river that intersects into a larger one! very peaceful!! Miles and miles of river to yourself... no people hardly,no houses...just river and wildlife! :)

[@hybridforex]

Man that sounds like paradise.

[@slrs3908]

Looks like you have done a great job of mating the engine to a kayak. The problem may be that the kayak is probably not a planing hull. It is probably a displacement hull and therefore cannot plane. That is why at speed your hull is sucked down into the water instead of planing on top of it. With 3.5 hp pushing so little weight, you should be going more than twice as fast as you are....with a planing hull.

[@hybridforex]

I know, but this was about fun.

[@ravigniani]

Quedo muy bien Claudio!, las prestaciones son correctas para la eslora y potencia y visualmente quedo bien resuelto. Me pone muy contento ver tus power en el agua y funcionando OK. Te mando un abrazo y felicitaciones!

[@hybridforex]

Bueno, tu fuiste mi inspiración amigo, tu fuiste el que me dio las ideas más importantes, gracias a ti!.

[@tiaannel1026]

Looks like it needs a little weight in the front.. looks awesome. Would love to try something like this!

[@hybridforex]

Hi there, I fixed that with an hydrofoil, it worked way better, no need to add weight, wich will make it slower.

[@westgl2006]

the front of the Kayak being so high in the front is telling me it is way out of trim. To get the front of the boat down and pick up more speed, to get on Plane, you need a hydroplane on the outboard motor that you can adjust the pitch on it, meaning the more you adjust it up in the front and down in the back, it will direct the prop blast lower, thus pushing down the front of the boat, they adjusts are small, adjusta a little at a time to get the boat leveled out and get the speed up use a gps on the phone, once you have the fastest speed achieved you are done.

[@hybridforex]

+Gary West kzbin.info/www/bejne/mHaxhpV7hNVkers

[@andrewtownley1565]

Exactly, in proper trim you could expect the top speed to at least double. I run a similar Mercury on my kayak but in 5H.P.. It's a bit scary at top speed, and not for children at all.

[@SinkTeam]

what would be most power hp outboard/ weight for ocean kayak malibu 2xl sit on top? It is 34" wide - should I add small outrigger to make it 40 in wide?

[@hybridforex]

Thank you. Every part is hand made, is not so dificult but you have to make all the parts. I'll send a photo of the hydrofoil installed. I made docens of speed tests, including triming, nothing works as the hydrofoil, I don't have a video of the kayak runing with the hydrofoil but trust me, it works.

[@hybridforex]

Muchas gracias!, si quedó padre el video y mejor aún los kayaks. Un saludo hasta la Argentina.

[@mickjbull]

Nice work. Thats pretty quick for a yak! Need something similar on mine

[@hybridforex]

mickjbull Good! you won't regret.

[@FLEITASG]

Despues de ver su video del mando acelerador quise hacer el mio gracias por la idea chicos aunque algo diferente básicamente es lo mismo saludos

[@hybridforex]

Excelente!

[@jpizarrojp45]

Hola. Me llamo jairo de costa rrica y me encanto la idea de adactar un motor al kayak gracias por dame buena idea para yo hacerlo al mio nada mas que es diferente modelo...

[@hybridforex]

Sólo hazlo es muy divertido.

[@hybridforex]

I'm very glad you like it, I hope these ideas help you keep fishing. With a 2hp outboard you can use a 9-10 foot lighter kayak, or use it with a trolling motor too, when outbards are forbidden. Thank you again!.

[@eoneal13691]

Why??? Just because you can. Love it! Just having some fun.

[@hybridforex]

Yeap! Thanks!.

[@DIONISIOHERA]

Me gusto como lo montaste pero en el video no se ve bien, si la estructura no es muy incomoda podria ser permanente y me parece q es mejopr ponerlo en la popa q de costado. He visto sistemas de costado y es muy sencillo pero el tuyo se ve muy bien

[@hybridforex]

=)

[@MeDFARd]

each ship have his captain.. so.. fibi is the captain of his boat.

[@MeDFARd]

friholes.. pinche wey

[@hybridforex]

Yeap!

[@hybridforex]

What?

[@extremehobby88]

just a tip. i think maybe you should put more weight in the front to help it plain a little better. great video

[@hybridforex]

I fix that with a hydrofoil.

[@RafsUTube]

that's a expensive gamble, all it takes is one roll over and those out boards are toast.

[@hybridforex]

Well, it never happened to me, so I don't know about that.

[@xYxL0RAxYx]

Gracias por todos tus videos me estan sirviendo de mucho te agradeceria que ivieras un tutorial de como iciste el timon gracias y saludos.

[@hybridforex]

Es el único vídeo que me faltó hacer, ahora no he tenido tiempo, pero tu puedes hacerlo y compartirlo, así otros se pueden beneficiar. Saludos!

[@Expandacraftboats]

You should check out the KZbin video of a Hobie Pro Angler 14 with an Expandacraft outrigger kit on it. If I were going offshore, I'd put an outrigger on both sides. Expandacraft has more than twice the volume as the Hobie outrigger. It will stop a lot of that bow up problem too.

[@hybridforex]

Yes you can make many fun things, enjoy it.

[@hybridforex]

The always pessimist/negative fellow. Turns out that runing, it's very very dificult to roll over, because of the down force, but if you roll over all you need to do is to dry/clean the spark plug, try to start it without the spark plug a few times, and you are back again, this two strokes outboards are unbeatable!.

[@jflynn12]

Great job! Please do a video on the extended steering set up. Thanks.

[@hybridforex]

As soon as I have time, I'll do it!. Thanks!.

[@hybridforex]

Yeap!, you are all right, I fixed the drag problem with an Hydrofoil, got 30% more speed, however same motor on a planing hull will get even more. But, was just for fun and learning!. Thanks for writing.

[@nikcrocker6380]

Be good to sort out the trim; bows way to high? Great project👍

[@hybridforex]

Thanks!

[@danielmurphy3277]

that's damn fast for 3.5 hp on the water with a grown person on it. I know the weight difference between a 3-3.5 hp and a 6hp motor is negligible in most cases, with the proper fin on the bottom of a kayak attached via some sort of bracket would allow for some serious speed on one of this with a 9.9hp lolol

[@hybridforex]

Oh I know, I made an hydrofoil for this same motor and increased speed by some, but I certainly won't recommend any outboard bigger than 3.5hp, but man, sounds crazy!.

[@corkyakker]

Hi I like the way you set up your outboard on a kayak.Nice video.I'm wondering how it goes when you stop for fishing in a choppy windy condition.You think you need to put on a stabilizer or that set up will do.It looks cool.

[@hybridforex]

I never had any problem with windy conditions, but of course a more stable setup it's better.

[@HOOKEMINTHEMOUTHKAYAKFISHING]

love andHOOKEM IN THE MOUTH!

[@hybridforex]

Sorry what?

[@HOOKEMINTHEMOUTHKAYAKFISHING]

I love the idea and go fishing 🎣 and HOOKEM IN THE MOUTH!

[@hybridforex]

Great!, lets get some stubborn fish!.

[@ChrisWilhite]

Yup. While we're out their in creeks / streams / rivers peacefully kayaking, you're coming blaring around the bend...taking the "peaceful" out of our kayaking.

[@hybridforex]

Dude... I really don't think we will ever cross our roads.

[@johnonorgan]

I tried this once with a 2 hp and then I realized how nuts an idea this was

[@hybridforex]

+john darmiento Yeap, not everyone can do something like this, normal people are excluded.

[@hybridforex]

I did that too, but as I'm telling other folks, nothing worked as the custom hydrofoil I made for the leg of the motor, got 30% more speed by reducing that drag. Thank you anyway.

[@prorider608]

You should use a 15 hp outboard, so you could get your kayak up on a plane

[@hybridforex]

hehe, no, I'll never put a 15hp on a kayak, I'm crazy, but not that much.

[@hybridforex]

Perdón por no responder antes, he tenido mucho trabajo, lo fijé con jacknuts, hay una forma de instalar jacknuts sin herramienta y es un método de fijación super barato y es lo más fuerte que hay.

[@nickmathews8608]

Game warden would love it!

[@hybridforex]

=)

[@hybridforex]

Pues depende, hay kayaks de 3mts usados en menos de $3500 pesos mexicanos, y el motor por ejemplo un 2hp de yamaha lo encuentras también usado desde unos $4000, lo demás es mano de obra.

[@ryandavey9772]

if u move ur seat foward or put weights at the front to hold down the kayak to make the engine flat, u will go much faster and easier to control

[@hybridforex]

ryan davey I know, but I solved using a Hydro Foil kzbin.info/www/bejne/mHaxhpV7hNVkers instead o moving my seat or adding some weight to the front.

[@ryandavey9772]

yea that foil still does nothing if u have the wake flat u will be much more stirdy and faster

[@hybridforex]

ryan davey Trust me, it worked flawlessly.

[@hybridforex]

it's a articulated tiller, like an L so if you push the tiller you turn rigth, if you pull the tiller you turn left, it's a hard concept to understand until you make it work.

[@hybridforex]

Que kayak es?. El soporte lo piensas dejar permanente o de quitar y poner cuando lo necesites?, lo piensas poner en la popa o al costado?.

[@dog.camper.673]

Cool.

[@hybridforex]

steve king Thanks!

[@maticumbia]

buen video me encanto felicidades

[@hybridforex]

Gracias a ti!.

[@annacaudill12]

Cooooooooooooool

[@hybridforex]

Yes it was!

[@---te7zs]

На самом деле мотор на Каяке опасен. Я понимаю, что это все забавно выглядит, но это лучше не повторять неопытным людям.😮

[@cristianghiotto3001]

me gusto

[@hybridforex]

Que bien!. Saludos!

[@hybridforex]

Yes, just attach a rope to the pullcord and you are ready to start it any time.

[@01maxiboy]

great video! well done :) thanks for posting

[@hybridforex]

=)

[@hybridforex]

Hi, I didn't do that, my motors still manual start. Thank you!.

[@hybridforex]

Well, if you are in a lake, and you get bad weather, trust me, the only safe way to get you out of there is with a motor, a kayak runing with an outboard motor it's way more stable than with a paddle. And if you are stoped, for fishing it's like all kayaks, behave the same way.

[@VLADiKish]

You will be surprized , but if you move center of weight to front , to kayak moving horizontal (not nose up) it can run faster ))

[@hybridforex]

I know, I fix it with an hydrofoil.

[@heathrowley7438]

awesome!

[@il4171]

super

[@hybridforex]

Thanks!

[@patrickmckowen2999]

Interesting but too noisy for my taste -- I want to get out to hear nature and not hear the noise of a motor or smell the fumes of gas! Electric with a nice big AH Lifepo4 battery. Cheers, Patrick

[@hybridforex]

PATRICK MCKOWEN That's why colors exists.

[@hybridforex]

Zyzyzx Zyzer Good for you dude. Leave the danger for those who can handle it

[@AM-wg6vt]

+PATRICK MCKOWEN I agree with stealth, but the problem is weight. Those electric motors require a big heavy battery to give you 10-15 miles range tops, so the gas outboard although less eco friendly is best for long trips. Also, way lighter!

[@patrickmckowen2999]

+Manuel “yakfishingtexas” Perez for the most part you are correct but I guess that would depend on the battery that one would purchase - if you go with expensive LifePO4 than the weight comes way down and the range goes way up, comes down the $$'s I guessCheers, Patrick

[@AM-wg6vt]

Hobie makes a trolling motor called the torqueedo evolve v2 that is design for my Hobie Pro Angler. I just couldn't pass through the idea of forking $2,200 dollars for it when my kayak is $3200. With $300 I was able to purchase an old Mercury 3.3hp outboard like the one in the video and after making the base and other materials I probably spend less than $500 on this project. A cheaper option would have been to use the Minnkota C2 that sells for $99 in Walmart and get a $80 battery. The weight, distance, and speed made me decide to go with the outboard at the end. We are talking roundtrips of 30+ miles when I go to the oil rigs to fish for king fish. I used the Hobie Sail kit, but had trouble beating strong currents, so decided to try this.

[@jeepcollector91]

Now just attach the two Kayak's together with some PVC and make it into a twin engine Kayak Catamaran. Maybe even make a place to attach a sail for a windsurfer then you will have a twin engine Kayak Catamaran Sailboat.

[@hybridforex]

Yeap, I almost do that too, but haven't had any time.

[@genilsondeandradesilva2490]

Tem que ajustar o trim ou o suporte do motor. O caiaque tá levantando muito a proa

[@hybridforex]

Oh yeah!

[@eliasmatoffi8713]

Hola, la verdad que ha resultado maravilloso! Me podrías dar una mano para comenzar a pensar la instalación del espejo en un kayak?

[@hybridforex]

Hola, claro, checa mis otros vídeos ahí documenté todo el proceso. Saludos!

[@argentinatotal9646]

ponele un motor 2t de bordeadora naftera de 35cc, tiene 2hp y pesa 1/4 de lo q pesa ese motor, y ademas como no es fuera de borda no necesitas nada para q sea legal, con el mismo puño dirigis y aceleras, y no necesitas reformar el kayak.

[@AUTOTEKS]

Sebastian Vega Si, sin duda, pero ahí hay que modificar la bordeadora para que use propela y no suba agua. Además casi en todos lados sólo requieres registrar un motor cuando pasa de 10hp, menos de eso no hay problema. Gracias por comentar.

[@argentinatotal9646]

no sube agua por el cardan!! xq el nivel del motor es mas alto q el del agua! de todas formas si entrara, no le hace nada xq tiene los asientos de bancada sellados, en cuanto a la modificacion, es una helice en lugar del cabezal. igual si se banca ese motor del video mucho mejor, pero como andara en un kayaxion wild spirit como el mio? no es tan largo como ese!

[@hybridforex]

Sebastian Vega Si, es más chico de 11 pies, sugiero un motor de 2hp.

[@sararami1]

muchas gracias x tus videos lo estoy aciendo igual en mi kayak podrias acer un tutorial de la barra articulada del timon? gracias salu2

[@hybridforex]

Es el único vídeo que me faltó hacer, ahora no he tenido tiempo, pero tu puedes hacerlo y compartirlo, así otros se pueden beneficiar. Saludos!

[@DIONISIOHERA]

Felicidades , como lo fijaste al kayak , pedi un motor electrico de 45 lbs de empuje y estoy pensandcomo fijarlo atras asi como lo hiciste tu. Te agradecere tus tips

[@hybridforex]

Si, funciona mejor.

[@hybridforex]

Thank you!.

[@alfredogisbert]

Hola Claudio, una consulta, entre la barra de direccion que prolongaste del motor a la prolongacion de la caña, la union para el juego de direccion es solo un tornillo pasante entre ambas ?

[@hybridforex]

Alfredo Gisbert Ah que buena pregunta, en efecto, es sólo un tornillo pasado, tanto el que se conectó al brazo del motor, como el que compone la articulación de las 2 barras de aluminio. Saludos!

[@alfredogisbert]

Claudio Hernandez Muchas Gracias Claudio !!!!

[@MrBerett315]

If you can get the boat to plane out, (add weight to front, or trim it down) you can make it go faster. w/ your current status... creating too much drag

[@hybridforex]

I fix it with a hydrofoil, very cheap, worked like a dream.

[@MrMois2004]

muy ingenioso...estamos hablando d cuanta inversión?

[@hybridforex]

500-1000 usd.

[@maplefufu4841]

Hi Claudio, it's an excellent video. could you explain how could you convert the manual start motor to electrical start one? and what's your outboard motor?

[@hybridforex]

Is not electrical my setup.

[@saulbibas]

Claudio excelente. Gracias por compartir. Como hiciste los controles remotos de velocidad y apagado? Como haces si tienes que subir la "pata" del motor? Ponerlo de lado como en otros videos será muy malo?... te queda todo al alcance. Por último cual es la autonomía de combustible?

[@hybridforex]

+Saul Bibas Hola, tengo otro vídeo donde explico con peras y manzanas como hacer el control de velocidad. Para subir la pata del motor sólo lo puedes hacer estando abajo del kayak, no hay otra forma. Si lo pones de lado no hay ningún problema, más que un manejo más incómodo, para dar vueltas debes tener mucho pero mucho espacio. Saludos!

[@saulbibas]

Gracias... excelentw

[@fisherman5473]

I'm going to put my 2.5 suzuki motor on my yak for my fishing. It takes too long to paddle 10km. But how do you start it? I'm going to put outriggers on my yak and put the motor in front of me to the side.

[@hybridforex]

Man, that's a fun project!.

[@maplefufu4841]

Thanks. So is it easy to restart your engine when you are in the center of lake in your kayak

[@hybridforex]

Is not that hard.

[@Luchito.M]

Hola Claudio, tengo un kayak de 3.70m de eslora. Pensas que con un Yamaha 2 hp sera suficiente? gracias por los videos!!!

[@hybridforex]

+Luis Manzi Si por supuesto, una ventaja de ese increible motor Yamaha de 2hp es el peso y el rendimiento de combustible, creeme por muy cargado que vayas, irás mucho más rápido y más lejos que a remo. Saludos!

[@alejandrofunes9481]

hola claudio de donde sos ,quiero armar algo asi ,soy de argentina, la pregunta es si viene algun kayak con el espejo listo para colocarle el motor y para ponerle flotadores para seguridad ya que soy medio pesado ,es para una sola persona gracias y saludos¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡

[@hybridforex]

Hola, estoy en méxico, y casi cualquier kayak de 11 pies lo puedes hacer, en el caso de motorizarlo entre más ancho mejor, pues es más estable.

[@Gelabert_pictures]

Espectacular, dónde está realizado? Me gustaría saber si en España es legal hacer algo así

[@hybridforex]

Hola, en méxico, desconozco si en españa lo puedes hacer. Saludos!

[@pp9499]

Claudio: te pregunto con qué y como fijaste el brazo de dirección?

[@hybridforex]

Paulo Piquioni Hola, es un brazo articulado, lo fijé con tornillo y tuerca a la palanca de dirección del motor.

[@theseakayaker]

Depends on how much Red Bull you've had before the paddle.

[@hybridforex]

You are right!.

[@FunWorldforchildren]

good

[@hybridforex]

Thank you!.

[@2fast4you25]

BUUUUUFFFF QUEEEE POOOOOWEEEERRRR !!!!! JAAAAAAAJAJAJAJAJA 🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪

[@hybridforex]

=)

[@RodolfoCarrera]

Claudio muy buenos vídeos gracias por compartir. Solo me gustaría saber como hiciste la extensión de la dirección o timón ? Gracias

[@hybridforex]

Rodolfo Carrera Hola Rodolfo, ese es un vídeo que me faltó sacar, no son más que 2 tubos de aluminio atornillados juntos en uno de sus extremos, lo cual crea la articulación. La parte que va perpendicular al brazo del motor sólo va pasado con un tornillo. Saludos!

[@RodolfoCarrera]

Muchas gracias Claudio ,

[@bradg6164]

I would like to see a 200hp on this!!!!!

[@hybridforex]

Lol!

[@braydenrichter4374]

Noooooo

[@stevweekz]

scupper plugs in or out ? great vid

[@hybridforex]

In.

[@rogermijares]

una pregunta mas carlos, como te la arreglastes para arrancar el motor? es decir si tienes que apagar el motor y prenderlo de nuevo como haces p[ara tirar de la cuerdad desde tu asiento?

[@hybridforex]

+roger mijares Ah ya, le amarré una cuerda de 1.2 mts que llegaba hasta mi asiento y desde ahí le daba el jalón. Saludos!

[@bigburpboy]

is that how they crossed the border?

[@hybridforex]

hahaha nice one!.

[@jota_onlive1309]

Hola cómo conectas el motor al kayak?? Y para tener la alargo para poder llegar? Gracias

[@hybridforex]

Hola, si gustas ver mis otros vídeos lo podrás observar. Saludos!.

[@hybridforex]

Claro, en mis otros vídeos documenté como se hace si gustas checarlos. Suerte!

[@octaviomoro4362]

Hola que tal, una consulta. Estando en el medio del rio o laguna, como haces para encenderlo? ya que el motor lo tenes atras y no esta al alcance la "piola" de arranque? Gracias

[@hybridforex]

+octavio moro Hola, lo más sencillo del mundo fue anexarle una cuerda a la piola de arranque, y dado que mis motores encendían hasta con un rozón nunca tuve problemas. Saludos!

[@frankstein497]

I just make my wife hold onto the back and kick. Works great!

[@hybridforex]

Lol, sounds funny!.

[@ryanlodge6327]

Frank Stein

[@snikwad003]

Far more cost effective

[@4445911]

perdona mi ignorancia, pero, el motor, exactamente, cuántos caballos tiene? No entiendo eso de hp. Podría acoplar ese motor mercury en una canoa biplaza hinchable ? Gracias de antemano, magnífico trabajo. Estoy cansado de remar. Gracias.

[@hybridforex]

Margalida bennasar suñer Hola, en la descripción del vídeo viene, es un motor 3.3hp o 3.5hp, hp=Horse Power = Caballos de Fuerza.

[@hybridforex]

I know!. Thanks for writing.

[@pksargentina]

hola, pudiste corregir el trim ? por que queda en proado todo el tiempo?

[@hybridforex]

Hola, si, con esto: kzbin.info/www/bejne/mHaxhpV7hNVkers

[@pksargentina]

Claudio Hernandez y como navega? Planea derechito con el 3.3/3.5 ?

[@maplefufu4841]

Hi Claudio, how could control your direction using your extend handle? Do you have any videos or photos to show how to make this extend handle? Thanks again.

[@hybridforex]

That's the video I never did, I'm sorry.

[@maplefufu4841]

Oh maybe I know. You make a perpendicular, so you could turn left easily,

[@hybridforex]

I didn't get it.

[@SiciElbuensici]

Donde grabaste es en mexico? esta super jejeje

[@hybridforex]

+Sici Elbuensici Hola en Jalisco México.

[@hybridforex]

Hola, si, en la presa de La Vega, Teuchitlan, Jal.

[@MrJohnjohn04]

just took the "peaceful" out of kayaking

[@hybridforex]

I didn't take anything to anyone, your "peaceful" it's yours!, you will never see me around you.

[@alandradeinc1]

EXCELENTE!!! EL BRAZO DE ACELERACION TU MISMO LO HICISTE O LO COMPRASTE EN ALGUN LADO? SALUDOS

[@hybridforex]

Al Andrade Hola, es un brazo articulado, lo fijé con tornillo y tuerca a la palanca de dirección del motor.

[@alandradeinc1]

esta muy interesante! donde me recomiendas podre conseguir un brazo parecido? gracias y saludos

[@hybridforex]

Al Andrade Perdón, te refieres al tubo donde monté el acelerador?, o al brazo de dirección?

[@alandradeinc1]

Claudio Hernandez AL TUBO DONDE MONASTE EL ACELERADOR, PERO YA HICE ALGO PARECIDO, AUNQUE NO TAN BIEN ELABORADO COMO EL TUYO GRACIAS Y SALUDOS

[@hybridforex]

Al Andrade Ah que bueno, me da mucho gusto.

[@piepiedog1]

Peaceful? Where I kayak the water is mostly full of drunken teenagers on motorboats D:

[@hybridforex]

I know, that happens everywhere.

[@embarcadosviedma]

have you also take the top speed with the yamaha 2hp?

[@hybridforex]

I'm sorry, no I didn't.

[@dogmusher]

Why not try air boat . I don't like hull raise up I can't see where hull it's block my view. Because air boat it keep hull down and I can view any where

[@hybridforex]

Dude, I was playing, it's my toy. If I need an inflatable boat, I'll use it.

[@ramonlinero7947]

madre mia , lo q ando buscando😄😄 como lo as echo ?

[@hybridforex]

Hola, tengo varios vídeos donde muestro como lo hice si gustas checarlos. Saludos!

[@mexican707]

What would happen if u put a 20 inch shaft on it ?

[@hybridforex]

I don't know.

[@il4171]

does kayak have the centerboard?

[@hybridforex]

Hello, no, it does not. Greetings.

[@hybridforex]

LOL, without getting tired?

[@randallgutierrezmadrigal5803]

Cómo lo ajustastes a la estructura del kayak?

[@hybridforex]

Gracias, finalmente un comentario inteligente, checa mi video Jacknuts & Kayaks, ahí lo explico, a partir de este vídeo en todo el mundo comenzaron a hacerlo así, me da mucho gusto. Saludos!.

[@randallgutierrezmadrigal5803]

Excelente.

[@hybridforex]

Nop, I didn't a new video with the hydrofoil or how I did it, currently I'm working in other projects so is not in my plans do it soon. Greetings!.