Power of the Okuma Control Full Webinar - Game-Changing Technologies Presented by Hartwig

[@harrelsontrumpets]

I'm late to the party, and have learned so much from this video. Ironically, I've been considering DMG MORI and other popular brands for a new mill/turn, yet never knew anything about Okuma. The control is the heart of the machine. There are millions of people who do not know anything about the Okuma advantages.

[@gar50172]

I’ve operated primarily mori’s most of my short career, just now getting introduced to fadals and okumas. Definitely different, Mazaks are a little different too, Haas has its own thing. I like Mori but it’s probably bc that’s what I grew up on

[@precisionrp]

George from Qualfab, bought my first Okuma in 1986. I just ordered my 9th Okuma. I knew the control was for me when I programed a parabolic curve on my first lathe with about 5 lines of code to rough and finish the curve in 1986.

[@harrelsontrumpets]

That's amazing! I wish I had known about the Okuma control options 20 years ago.

[@kevind1865]

Regarding load limit per tool, is that available on the OSP300M control for M560v's?

[@josevidaurri1934]

Where can I go to learn how to operate a okuma controlled machine

[@santoshedward]

Hi there, i need your support to help me upgrade my okuma simulturn 300 from win XP to Win 10. Can you help

[@Emiliano_R77]

Cómo se habilita el Bit 39 en un OKUMA MULTUS B400II?

[@matthewhodge8026]

im looking for the software so i can test out programs for errors and crashed before they go out to machine. can you help me get ahold of that software?

[@HartwigInc]

hey Matthew shoot us an e-mail to [e-mail]

[@Emiliano_R77]

*DO YOU HAVE THE OPERATION MANUAL FOR THE OSP-P300S CONTROL IN SPANISH? THANK YOU*

[@HartwigInc]

e-mail us at [e-mail]!

[@paumasip]

Hola Emiliano, te dieron alguna respuesta del tema del manual. yo tambien trabajo con okuma en el laburo y los manuales del control osp no estan por ningun lado!

[@freedomenergy6644]

Thank you for doing this it assist me make the right choices on CNC machines. Regards LeRoy

[@HartwigInc]

Thanks for watching! Let us know if you have any questions

[@fredrezfield1629]

@@HartwigInc what did you guys substitute IGF for?

[@HartwigInc]

@@fredrezfield1629 Sodick

[@vyk9815]

how to control rapid without single block control please clear my doubt

[@HartwigInc]

shoot us an e-mail at [e-mail]

[@slartsa]

There are three rotating knobs. Leftmost will allow you to adjust rapids from 0% to 100%. I like to test new tasks with single block and 5-30% rapids. When all looks good i drop single block and eventually adjust rapids to around 75-100%.

[@pozalujstapodpishus3062]

большие файлы окума не корректирует. Бывает, что файлы не читает, ругаясь на недостаток буфера памяти... в-общем не лучшее решение...

[@Дмитрий-т7г7ч]

День добрый. Подскажи пожалуйста если в курсе. Графическая симуляция на Okuma OSP7000L Есть ли она И как перейти в режим симуляции. Мануала на русском нет. Переводим потихоньку.

[@pozalujstapodpishus3062]

нужно в автомате нажать кнопки, как в видео: kzbin.info/www/bejne/j6qZqHVtgNKCeqc и затем выбрать на экране 3d рисование или как-то так и нажимаете зеленую кнопку NC Start

[@Дмитрий-т7г7ч]

@@pozalujstapodpishus3062 Спасибо попробую.

[@dmsentra]

Are the apps available for purchasers of used P series machines also or just those one owner buyers?

[@HartwigInc]

Apps should be available to whomever is currently using the machine

[@Motivation-vg3yk]

I would like some help to learn CNC programming GRINDER OKUMA PLEASE

[@HartwigInc]

please e-mail [e-mail] and we can put you into contact with someone who can help!

[@sereezyyy7068]

Anyone have a good helical program

[@policebox1092]

So good

[@robertwelsh2499]

That controller is an overly complicated pos