These external brush motors can easily be timing adjusted and even reversed just by loosening the back screws and turning the end-bell.
@hardcoretam5 жыл бұрын
My Chinese 5 slots all arrived with 0 timing so could be ran in either direction. The 13t I used (Yeah Racing) was a bit too tame for me but with some timing added it perked up quite a bit more. I seen that Surpass Hobby are just releasing 550 versions of the 5 slot. Rebuildible and cheap as well so might be interesting to see how they compare to the new lower priced Holmes 5 slots
@ExocagedRC5 жыл бұрын
hardcoretam gotcha. I should be getting quite a few of the new Holmes motors in any day so you’ll see them in various trucks including the new Capra
@hardcoretam5 жыл бұрын
@@johnbasterson7938 of you mean the super expensive Holmes 5 slots then of course they won't compare. But Holmes has released some new budget 5 slots so it will be interesting to how they compare to these as price is similar
@semperatis5 жыл бұрын
You can get a 100% drag brake in a 1060,by removing the jumper that covers F/B/R selection.
@NikkiNexo7775 жыл бұрын
Thanks for this video. I dig the wheels on this truck. What are they? Do you have a link? Thanks
@ExocagedRC5 жыл бұрын
these right here rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F4x-Alloy-1-9-Beadlock-Wheel-Rims-for-Axial-SCX10-RC4WD-D90-CC01-1-10-RC-Crawler%2F223439920606%3Fhash%3Ditem34060e9dde%3Ag%3A2xsAAOSwgOpctW~Z&campid=5338273090&toolid=20008
@Andrew-hh3ol4 жыл бұрын
I think it mostly just needs a timing adjustment
@royomtb5 жыл бұрын
The motor was with some advence in time or was at zero degrees ? if ti was at 0° , makes not difference if was in forward or reverse rotation.. performance will be the same in both direction. If threre were any advance , then this will make a difference in performance related to motor rotation direction.
@ExocagedRC5 жыл бұрын
Gustavo Royo Ribeiro correct. I ran the motor out of the truck a day or so after the recording and there was a difference in rpm so there is some timing on it.
@royomtb5 жыл бұрын
@@ExocagedRC is possíble to adjust the timming? At Reedy Randon 2 or at Surpass 5 slots is possíble the time from -12 to +12 Degrees.
@ExocagedRC5 жыл бұрын
Gustavo Royo Ribeiro yeah it’s possible to do that, not sure how much this one can go
@RCsRCCars5 жыл бұрын
You’re the best custom builder on KZbin. Any plan to build a rig with the Toyan 4 Stroke Methanol Engine?
@ExocagedRC5 жыл бұрын
RC's RC Cars LoL thank you and nope, I have no plans to build with that motor
@tomlucasrccrawlers91085 жыл бұрын
I'd set the timing at zero. Brushes will last longer and you'll get more speed and torque. Obviously it's not Holmes quality in the windings and magnets(hence the lack of drag brake but that's also the ESC)...but then it's not near as costly.
@ExocagedRC5 жыл бұрын
Tom Lucas if I were to legit try to make this the motor to stay in the trx4 I simply wouldn’t. Brushed motors for me will always be Holmes stuff without a doubt. But I wanted to see how this would do.
@tomlucasrccrawlers91085 жыл бұрын
@@ExocagedRC Oh definitely. But it's nice to have cheaper option...especially if "one" doesn't have the coin. Seems like a nice affordable set-up.
@tomandrews53925 жыл бұрын
Seems to have a great deal of torque ....
@darrennixon19864 жыл бұрын
Is normal rotation clockwise and reverse rotation anti clockwise? Trying to work out which way to mount a gearbox for what should be a normal rotation motor. I've got a surpass hobby 550 crawler 5 slot 12T. Should that be run clockwise?? Cheers
@DADRacingYT5 жыл бұрын
good to know thank you.
@dwaynekaye20005 жыл бұрын
Awesome...other than Traxxas is there company's that make reverse turn motors?👍👍
@ExocagedRC5 жыл бұрын
D19 K yeah, Holmes Hobbies makes some very nice motors and you should be seeing them on the channel as soon as I can get them.
@dwaynekaye20005 жыл бұрын
@@ExocagedRC cheers mate. Thanks for the info.👌👍👍
@dwaynekaye20005 жыл бұрын
@@ExocagedRC sory to be a pain.lol but 1 more question. As the new capra has portals will it also require reverse turn motor. Cheers again buddy.😁
@ExocagedRC5 жыл бұрын
D19 K I don’t think it will need a reversed motor.
@powerhobbyart94805 жыл бұрын
Yes powerhobby has a 550 reverse rotation motor specifically for the trx4
@james1921975 жыл бұрын
Very nice
@rcmindset28765 жыл бұрын
cant you just move the endbell to time it correctly the other direction?
@CarminesRCTipsandTricks4 жыл бұрын
Yes, you can.
@CarminesRCTipsandTricks4 жыл бұрын
NO.... It's not Holmes Hobbies quality! But for us Po Folks, that's a GREAT price for a Motor/ESC Combo.
@ExocagedRC4 жыл бұрын
I agree, homes has his sport line up thats $15 but its a sealed can
@rcmindset28765 жыл бұрын
Holmes hobbies has a video on just this situation
@irvinthatwhitefk85 жыл бұрын
Powerhobby has a 550 reverse rotation
@ka41725 жыл бұрын
I run a other china 5 pole surpass 20T i think there powerless especialy when crawl up a steep obstacle .
@javiercajaroma22024 жыл бұрын
compared to what motor? I mean, what motor did you have before? your surpass is 540 or 550? I'm interested in buy one, thanks in advanced
@ka41723 жыл бұрын
@@javiercajaroma2202 All Surpass ,550 5 slot 20T versus 550 3 slot 21T from full stop to start climb a vertical obstacel i like my 3 slot more.