Powerhouse GEN 3 Regulator Haymkr 500 [Adjusting The Pressure]

UPDATE 5/29/2020-
The new Gen III regulators are different than in this video. Powerhouse makes rolling changes to better performance without labeling it a new generation regulator.
Current Gen III regulators will include a Silver fill nipple and a Green piston with a rubber regulator end of the piston
Here is a detailed video showing you how to adjust the output pressure on your Powerhouse Gen III Haymakr 500 Regulator.
If you have any questions, comment below or give us a call Tuesday through Saturday at 713-896-8841
Results from Video-
Adjustment Insert Bottomed Out- 418 PSI
1/4 Turn Out- 441 PSI
1/2 Turn Out- 531 PSI
3/4 Turn Out- 556 PSI
1 Full Turn Out- 655 PSI
1 1/4 Turn Out-
1 1/2 Turn Out- 838 PSI
Shop Our Powerhouse Regulators Here:
proedgepb.com/...
Shop All of Our Paintball Tank Regulators Here:
proedgepb.com/...

[@urag3hard]

“Just be a little careful” while holding a reg with no set screws at 400 psi. Brave, brave man.

[@ProEdgePaintball]

Haha trained professional!

[@drewroberts3174]

Thanks proEdge for the info on adjusting my powerhouse haymkr & awesome customer service when I ordered my 2 powerhouse regulators .I definitely send the rest of my team to order powerhouse regulators when they are ready to buy them👍🏻

[@ProEdgePaintball]

Drew Roberts Thank you for the kind words! Of course if you need anything at all just reach out to us, we are here to help! Regs are now in stock and not on back order any longer!

[@cmckinley024]

@@ProEdgePaintball Hey Pro Edge aren't the haymkr 500 regs supposed to come set to 500psi? Have you found their factory rated setting to be accurate or was this a factory reg outputting 418psi stock? 500psi should be perfect for my Dye DSR, so just want to make sure I dont have to adjust or test it.

[@ProEdgePaintball]

@@cmckinley024 The 500 psi setting is not an exact out out per regulator. You will see a little variation between 400-500 but we rarely ever see an output over 500 psi or below 400 psi.

[@cmckinley024]

@@ProEdgePaintball thanks! I will see if one of the shops around me can test it.

[@seanbarlow4337]

Fantastic video, exactly what I needed to raise the pressure for my Automag. Thank you John Jackson!

[@ProEdgePaintball]

Glad the video helped!

[@pokokceri_pb]

Forgot to mention..thanks proEgde for the detail video!

[@Damitsall]

Thanks for the great video.

[@ProEdgePaintball]

Thank for the great comment! 😍

[@misaelvelez3538]

Awesome video and great details, thanks for teaching me how to set up my new Haymaker Gen 3🔥💪

[@ProEdgePaintball]

Happy to help!

[@The_menace23]

Exactly what I wanted to see thank u 👍🏻

[@ProEdgePaintball]

Big_Josh Happy to help! If you have any questions let me know!

[@dabzpaintball4478]

Where do I find that bottom part that screws on ?

[@Menachiball14]

Thanks #22 always helpful thanks for sharing the knowledge 👍

[@ProEdgePaintball]

You’re welcome! Thanks for the support!

[@MutantPaintball313]

I want to make that pressure testing setup for my team... I have an asa in route to me and I want to know where I can get that piece you have screwed on the bottom as well as how you have that digital gauge connected.

[@tacodorifto]

Where can i get the mini tank that you put on to air up and test the regs?

[@gpenguin3]

Recommended pressure for CS2? Straight out the box? 450?

[@dabzpaintball4478]

Can I run my Vanquish gt , & m2 & gtek on 400 psi?

[@underbarrelpbcam2959]

I noticed on the website the longbody has the option of a titanium bonnet. Will this be offered on the regular size?

[@ProEdgePaintball]

Under barrel PB cam yes we can make that happen! I believe they will be available this week.

[@SamaraandBoudreaux]

What do these come shipped outputting? Are they all the same output to start?

[@ProEdgePaintball]

Jordan Patton The Regs currently come set at 500 PSI from the factory.

[@andychia3132]

400, for the LV2 thing can shoot a case of paint with a 80ci fill lol. Kind of nuts.

[@ProEdgePaintball]

Yea the LV2 is super efficient and has a great shot

[@shanee3766]

Ripper Luxe X, Pro v2 reg, Sl2 77 bottle right now with 1 shim running 550psi output shoots nice for me. What should I set my Powerhouse reg at? Looking at the 500L...

[@ProEdgePaintball]

Admin Stock pressure is about 500 PSI so you should be set right out of the box. If you decide to order , add a note that you’d like 550 or your preferred pressure and we will adjust it for you before shipping.

[@pokokceri_pb]

quite dissapointment..bought the reg for $129..but need to buy another tool just to adjust the pressure and its not straight foward..hope they have solid explanation on why they did that way to adjust it..

[@ProEdgePaintball]

AysNdj I should have been more clear on the tool. You don’t actually need the tool in the video to adjust the pressure it’s just a tool specifically made for the reg. We have used a small Allen wrench to adjust it and also c ring pliers will work.

[@pokokceri_pb]

ProEdgePBTV aahhh...then make sense!..thanks again for the great video..

[@mikec7848]

Who makes the bottom mini tank you screw onto?

[@ProEdgePaintball]

Powerhouse makes them however they are difficult to find in stock usually.

[@loototter1004]

New to this regulator. How do you know when you have it bottomed out all the way? Does it just stop turning?

[@ProEdgePaintball]

Yes, it will stop at its lowest setting.

[@qsv2032]

Do you make them Tham for 1100 1200 psi out put pcp

[@ProEdgePaintball]

Unfortunately this regulator can not go up to 1100 or 1200 psi output pressure.

[@dannymoon3303]

I want to oder the tool from your site, but you guys charge 15.00 to ship. Come on!

[@ProEdgePaintball]

We unfortunately only offer UPS ground shipping due to bad performance with USPS. We also offer free shipping on orders over $59.