Powermatic III

[@timothyj4702]

I’ve tried a few different machines over the years but I still like to use my Top-O-Matic that I’ve had for over a decade now. I can crank out perfectly packed cigs as quick as any electric machine. The type of tubes you get definitely makes a difference also. Some just don’t pack as well or slip off at the last second leaving you with a tiny frustrating gap between the filter and rest of the cig. I usually use Zen full-flavor tubes or sometimes Top tubes. Don’t buy shitty tubes just because you might save a dollar. It makes a big difference.

[@jesseneill2784]

Ok so 1 week after I ordered my new Powermatic 3 I am glad to see it arrived at my house. I have to say it is a true pleasure not to have to worry about packing the tobacco any more. You will still need to tamp your smoke a couple of time to make sure it is evenly distributed at the filter connection to the smoke but other than that it is a perfect machine. I use Red river tobacco, only because I am not willing to buy 12-20 pounds at once. If leaves and shredders offered the same great deals in not such a large quantity show that i could try it out and see if it worked for me I would probably go that route since there price is better than the $12 a pound I currently pay. This Powermatic 3 is so great I don't even have to pre-roll smokes I just leave on a counter on top of a cookie sheet to collect any droppings and all i do is literally 5 seconds to roll a smoke I simply put a tube on the machine 2 seconds later it rolls a smoke and i smoke it. This is the greatest thing since french toast hahah seriously it it awesome and I think any one who rolls smokes should definitely buy one of these. I do not get paid to say any of this, I am in no way affiliated with the machine and gain nothing by saying these things. Although I wish I was getting paid to promote this machine because it would be so easy to promote this machine it truly is the best I have ever seen or had. I have been rolling since 1992 so like 26 years of rolling and this is the only time I have spoke so boldly about any product. Get yours quick!

[@the420xtc]

Hey J N I hope ya get this message. I also roll my own and buy the 1lb Red River tobacco. I can get like 600-800 cigs out of it and it'll last me all month. But I have to roll em all by hand and after years of this like you, I'm trying to find an electric roller. Where I can just throw the tobacco in the hopper and put in a stack of papers and it'll spit out cigs. non-stop. Have you seen anything like this? It'd save ppl like us so much time.

[@kimmonk1523]

@@the420xtc kzbin.info/www/bejne/e6e7qZZuf7JpoZY for 3000$

[@the420xtc]

@@kimmonk1523 awesome love it thanks

[@ThekiBoran]

Can you get tubes/filters that use Japanese cotton? That'd be much better than the plastic filters Marlboro/Camel, etc...

[@ferraf2]

The Powermatic 3 does a great job with 100's by simply increasing the packing density setting.

[@Derek2k]

Really?! Nice!

[@jonathanburtlowii9559]

I find the 100s work better

[@Val-ee4hd]

Thanks for that info!

[@RagdollsOfLasVegas]

Glad ro know that. Thanks. I think I'll try it

[@chipparix]

Yes perfect

[@ehelland1966]

Evan,i bought one from you folks about two months ago,works fantastic,the only problem i have at the moment is that it is jammed up,how would i be able to fix that.

[@michaelakstull]

The only bad thing for the PM3 is that you're kind of screwed if you get a jam because of you can't access the inside without voiding the warranty as far as I know. I've also read the 1st version of the PM3 is much better than the 2nd version but you can't find the 1st version anywhere. I'm still using a PM2 because it works every time plus it's so easy to clear a jam, that helped me big-time when I started rolling my own.

[@dhmu5tang71]

I have had my Powermatic 2 for dam near close to 10 years by now and still works great never had to fix it once.... I don't think the price increase for this one is worth it at-least for me... Powermatic 2 cost me $100 and definitely got my monies worth from it...

[@PreciousBoxer]

Right now (3-1-2020), the Powermatic 3 is a $240 machine vs. the Powermatic 2 weighing in at $70 (sparing the pennies). I would recommend the 2nd version over the 3rd by price and features due to price. The #2 has a catch tray whereas the #3 requires your hand to put in into the nonsensical tray. The only benefit of the #3 seems to be the savings of tamping time, where the machine still takes time to complete.

[@immersionedits9597]

i dont smoke, this was just satisfying to watch

[@TheVCRKing]

Same

[@scaleop4]

I vape but i still find it interesting.

[@kitosmosis3639]

vista interior powermatic 3 kzbin.info/www/bejne/pJjUY4ewnbOjfNE

[@nirhaber6149]

@@scaleop4 vapes are for losers. Try the real tobacco world

[@kumarsujith2640]

Same

[@PreciousBoxer]

You didn't mess those tubes up. They're still 100% usable. I'm curious to know how well they pack at the filter. The body of the smoke is never a concern, just where it ends when you're down to the butt. Having that cherry fall off at the wrong time can be quite inconvenient, and even damaging.

[@russolstead4424]

really packs quite well at the filter. I was skeptical at first, but I'm now a huge fan of this unit. Don't ignore the comments about having tobacco fairly dry. It's quite fussy about that. I put mine in a pan to dry for an hour or so and works great. Just rolled my 1000th smoke and as long as your tobacco is good it just keeps chugging along.

[@tonythetiger5968]

Same concern

[@orcvsivstitia7608]

I just use 100s and tap/bang pack em and twist the top to keep em closed up.

[@CottonFarmer667]

@@russolstead4424 I found that if you're in a hurry, higher moisture tobacco feeds fine if you reduce the cut of the tobacco by using sissors on the damp tobacco. Doesn't take much snipping at all and it will feed fine without bridging in the hopper.

[@robertwolfe2971]

I get a pot grinder and grind the tabbacco up good and it doesn't matter if the tabbacco is wet or dry it works great.

[@simonsmith2642]

I quit after 26+ years with vape, but, I rolled my own when they started the FSC bullshit. I used a Topomatic T2, OHM menthol and Zen menthol tubes. I rolled like that for 6 or 7 years, and then right before I turned 40 I decided to quit, not because I really wanted to, because I really liked smoking, but because of other people's bullshit. I got no problem with smokers, it's your life on this planet, live how you want to live it. Enjoy your stay here on this spinning rock. Nobody makes it out of here alive, so smoke em if you got em.

[@Aerochalklate]

So you quit because of people’s opinions then proceed to tell us to F their opinions? Am I reading correctly? If so then start smoking again 😈

[@ivanbajinov7295]

Nice! Just ordered one. I went through a few of the manual machines, and was not happy with them. Broke the first one in a week, the second one I sent back, and the third one was messing up my shoulder - you have to yank it, or the tube is not filling up evenly. Had enough of it. I will definitely post how it works out. I have high hopes.

[@goinhot9133]

How’s it going

[@ivanbajinov7295]

@@goinhot9133 As advertised. 6122 cigarettes - no issues. Works great.

[@goinhot9133]

@@ivanbajinov7295 ordered one last night!

[@istvannekarpati9119]

érdeklődnék, hogyan lehet tisztitani ha le áll, és ki irja hogy JAM?

[@cap5macca5jack5]

Just got this machine mine is different from this it has an option for kings and 100s today I made 5 packs in 30 minutes! This machine is great I have bad RA and my t2 wasn't cutting it anymore. But it you will be glad you did

[@thomaswhitten2537]

A #2 Phillips head screw driver fits perfectly into the tubes when you mess them up. Run your thumb around the messed up part of the tube and it saves the tube.

[@DelCHORDians_Normb]

A regular wooden pencil is also the exact size for a cig tube.

[@genesclean1]

Bic ball point pen also helps restore an even opening in the tube

[@Val-ee4hd]

I just start mine on the nipple not fully on... and turn them to open them back up.

[@edwardmarquis4411]

Just flatten the tube from the center outward then do it again at a 90 degree angle. It stiffens up the tube, especially at the end. Easy to insert back into the machine and no tools needed.

[@mattjersey1483]

I just lightly pinch and draw the tube through my fingers and it usually fixes the tube when it folds in

[@Granpah]

The advertisement on Amazon says it makes kings and 100,s. Can you clarify please

[@antrygis1]

I just got one I thought was this. But it does not have the density control. And I have used the PM2 for years and make mine tighter than either of the 2 settings come out. There is a 100 setting but I cut the tips off of my 100's now + then cause it has a different flavor and most smokes have something sticking out anyway. Oh crap I've got to return this and get this one.

[@andrewfleming5170]

would it work well using dry cannabis? I don't see why not??

[@quaycrawford7243]

One question lol can you use this for weed and joint paper ?

[@bozz592]

i am looking for the powermatic 3 not the powermatic 3 plus! where can I buy the normal powermatic 3?

[@pennyprivate120]

I want one. This looks like the best one I've seen so far. My Powermatic 2 is okay, but this one looks easier and faster and looks like it makes fuller cigarettes.

[@TobaccoLeavesStore]

just give us a call at 1800-243-2737 and we can get you on the pre-order list for when they come out in June!

[@siuetimanuopangai5310]

do you have website that do online sales of this powermatic 3 please?

[@tiredoldman5329]

I have the P2 also. This machine puts it to shame! Get one or 2. Its costly, but worth every penny.

[@Val-ee4hd]

I started out with the Powermatic II + Saved enough money to get the Revolution. Was looking at this one to see if it was touchy about moisture and seems it has that also. Revolution does not do 100's. I spend more on tubes than tobacco. :(

[@neilhibbard8351]

Is there a place to get custom tubes. I mean like tubes with your name on them

[@stevecoates5308]

Can u up date how many u did out of yr u did like did u make it to 20.ooo

[@raresadrian3059]

Hy, I have a powermatic 3 and from yesterday it not inject well the tabbaco în tubes, the injector come with tabbaco în tubes and retreat with the tabbaco back and make me just a half of ciggarete, any solution please? Thank yoy

[@edwardmarquis4411]

Your tobacco is either too wet or cut too long.

[@markhall7222]

I saw a review Dec 27, 2019 and they say and show a setting for 100mm and kings, I think they did an upgrade on this machine, the readout window looks different also

[@lordbuttsmcgee3415]

What if you were to put shredded dried tomatoes in there?

[@walterfinch2739]

Does it work with pipe tobacco and cigarette tobacco as well?

[@OhioBoii330]

Im confused tho.. I've had the orange hand crank "Top-O-Matic" roller for the last like, 10 years. It worked pretty much flawlessly the first 2-3 years and then it started acting up and wouldn't fill the tubes or the tobacco would like clump up inside the injection tube and took A LOT of force to push it through. And also, the tubes would just slide right off the loader. I struggled with that for the last 7-8 years because I'm cheap and don't really smoke all that much. However the other day I got fed up with it and ordered an electric roller made by "Tiyoah." It works amazingly well and doesn't cause me any stress or issues, at all. But, I noticed on yours and also mine it says "Avoid fine or long cut tobacco." Your tobacco is long cut as well as mine. The only other cut they make is fine. Soo, I don't understand what they're trying to say. My cigarettes are perfectly tight and fill the king size tubes all the way. But, my cherry keeps falling off and I don't know what I'm doing wrong or how to fix that issue..

[@TobaccoLeavesStore]

Look at the video for the new Powermatic V please.

[@travistarbell5934]

Is this a corkscrew style or like a manual style how it pushes the tobacco in

[@TobaccoLeavesStore]

It injects it with a spoon. The corkscrew (auger) machines are dangerous and shouldn't be used!

[@tausifgilani9855]

Does this machine work with tubes with 25mm filter?

[@comunitateawordpress2820]

What is the best tobacco for powermatic 3 ? And put a link here where it can be bought internationally. Everyone presents this machinery, but no one says what tobacco it uses and from where. Thanks!

[@b-2466]

I still have one of those hand held rollers. No two cigs are the same 😂. That said, I need this automatic roller.

[@mechanicswife]

Is this the powermatic 3 or powermatic 3+

[@goinhot9133]

How’s it holding up😊

[@miguel360kmc]

How long have you had it? My Top a matic is like 6 years old have had to replace injector almost once a year tip holder maybe 2xs and springs once.. but the main handle is starting to go was about to get the II but seen this one dont mind dropping the 250 but if it dont hold up screw that.. could always get a hopper for the 2 holds more Tobacco and makes stuffing easier

[@mechanicswife]

I just got this one today & so far I don’t like it, it will do 100’s, but no matter the 100’s or king’s, it dont pack them the greatest, very loose & mine doesn’t have the density setting now does the counter work, probably gonna be sending it back…

[@susanalley3362]

How much does that machine cost approximately and can you order it from somewhere and have it delivered

[@BermondseyBoy]

seems much easier to use than the 2. Think I'll buy this one!

[@dodosla]

Does the tobbaco has to be perfectly dryed to work with this powermatic? I can't bux it as im not from america but just for future refference....does it work like that if its abit dry or abit wet?

[@top2percent]

This comment section gave me more cancer than the cigarettes.

[@indeepjable]

Nobilium Uranium (Directed Towards "mush room")

[@npr2002]

You sir, have won the internet for today ! 😂😂😂😂😂😂

[@Barbarra63297]

HOW MANY WATTS IS THIS MACHINE? THANKS!

[@OG-ROB]

At one point a few years back I was RMO but I only had a topomatic manual machine.. I'm thinking about getting back into RMO .. what is the average savings per pack nowadays?

[@Burhanontheranch]

Why doesn't it have a catch tray underneath the dispenser?

[@Wingman-yl3qq]

Mine just keeps cranking. Anyone have a solution? 15,000 cigarettes so far but just doesn’t recognize when the chamber is full.

[@KhaledAli-qf5sr]

Did this machine fill to the end filter?

[@mikecr4916]

My PM3 has 3 bars on the left, with none at the bottom. What's the deal with that?

[@CottonFarmer667]

My Powermatic III does a better job of evenly distributing and packing the tobacco than did my Powermatic II in which I had to manually distribute the tobacco. On rare occasions a cigarette will come out slightly loosely packed with the Powermatic III but I solved this by getting the Leaf Only cigarette finishing machine as an accessory. This little jewel not only flattens the end of the cigarette and rolls the paper edges inward but also does a fantastic job of making the tobacco settle in the tube toward the filter from the slight vibration encountered when the cigarette is inserted into the Leaf Only's finishing head. I highly endorse the Powermatic III as a fast, convenient way of making your own smokes. Mine cost only a bit over $200 from Amazon and with the cost of ready roll cigarettes hitting $80 a carton in my state the Powermatic III is a money saver that soon pays for itself.

[@timothyj4702]

The only reason I would ever consider buying an electric roller would be so that I don’t have to pack the tobacco in myself. I don’t really see why anyone would want an electric roller that only preformed the same task that a crank does, but slower. I’ve been using the same Top-O-Matic machine for over a decade and I can roll quicker and more consistently with that than with an electric one.

[@CottonFarmer667]

@@timothyj4702 As a long time user of each, I disagree with your statement. If you go with the Powermatic III you will find your making time cut in half and your consistency in making perfect cigarettes more than doubled . Only weakness of the III is the cut of the tobacco. It doesn't like long cut tobacco but if your can cut it a little shorter it never misses.

[@timothyj4702]

@@CottonFarmer667 To each their own I guess. I’ve tried a few different electric ones and although the Powermatic III worked well I still feel I can get just as good a roll with my Top-O-Matic. I just dump a large pile of tobacco and tubes and hammer them out. I think I’ve just been doing it so long and have a feel for how I like it packed that it works better for me. Plus there’s virtually zero maintenance for my machine. I’m glad you like your Powermatic though. I’m sure it would grow on me if I used it more often.

[@user-kx2kb9dq3j]

How long does it take you to make a carton?

[@CottonFarmer667]

I rarely sit down long enough to make a full carton but if I did it probably would take about 50 minutes based on how long it takes me to make up a pack or two.@@user-kx2kb9dq3j

[@whocares397]

will the tobaco fall out if i put it in a plastic cig pack and go walking around ?

[@Karmah01]

I wish it did 100's. I also wish it had an automatic tube feeder that would hold 10 or 20 tubes so you don't have to feed it one by one.

[@tomcervenka7404]

The mini rocks! That's all I got to say. But if this can pack it close to the filter I'd be surprised.

[@csquared1067]

I wonder if you took some bud and prerolls if you could get that thing to fill your joints for ya

[@kevincaldwell9202]

I WAS THINKING THE SAME THING...JUST NIP OFF THE FILTER (OF COURSE)

[@kevincaldwell9202]

200 tubes are only $2.00

[@geo8841]

Can I use this for 100's?

[@fastnoc]

I really want one of these. I've been using a Powermatic II for 12 or 13 years, but I shied away from this one only because it concerned me how well-packed the cigs would come out. Plus, I overstuff mine sometimes because I tamp them down a few times each time I roll one. I'm not sure this would give enough extra tobacco to tamp them down and still be full. Has anyone else had these questions? It sure would be easier and faster with this if those questions would be answered.

[@BarryGGould]

if you put the density all the way up will it fill a 100??

[@russolstead4424]

Very well, actually.

[@eddiewillers1442]

Watch those old films of the geniuses who put Apollo on the moon. Thay had ashtrays next to their computer monitors. Just saying.

[@Boddah.]

That's before people knew the harms of smoking.

[@R3DI5C00L]

Some of those computers back in the day came with ashtrays even built-in. Look it up online people, I'm not bullshitting anyone. Just saying.

[@Balen-]

And?

[@eddiewillers1442]

​@@Balen- And cigarettes are good for the brain. For every yin, there's a yang.

[@Balen-]

@@eddiewillers1442 no they're not

[@SpookeyClown]

Why do all of these high end machines have the tubes dangling down instead of a tray? This one even has a tray, but on the other side. It's useful for catching stray tobacco and keeping the tube from falling.

[@Becklenay]

I have a T2 and usually use Turkish blend. How does this do with the moister tobaccos? I would love to move up to an electric, but am afraid of the potential jamming.

[@TobaccoLeavesStore]

You shouldn't use too moist of tobacco when rolling because it can cause jams in the machine. If you've had good results with the powermatic manual injectors you shouldn't have a problem, and if tobacco is too moist you can always dry it out!

[@tiredoldman5329]

I used a sample of Leaves and Shredders Turkish Blend that they sent me. Chopped it up with the wifes Nutri Bullit (4 blade) . Worked perfect! No jams at all.

[@williamlobur6181]

i would assume once you get the hang of it you could make a pack in about 3 minutes ?

[@RagdollsOfLasVegas]

I use the II, which has a manual lever and can do a whole pack in under 5 min

[@RagdollsOfLasVegas]

I have the II, which has a manual lever amd can roll a pack in less than 5 min

[@johnmurosky3237]

I don't smoke but my girl does. I make them and she smokes them. We have the Powermatic II..... Love it.... getting the PMIII soon!

[@hiroshi138]

Where do you buy supplies 👀?

[@guvensigarasarmamakineleri2607]

kzbin.info/www/bejne/emjIm6p4l9atpMU

[@lamefairy9156]

Okay but what’s good quality Tobacco to use?

[@IndianaDundee]

Leaves & Shredders What if someone wants a tobacco that is exactly like the kind the comes in the prerolled class A's (Marlboro)? Any suggestions???

[@DM-kv9kj]

What you need to do to replicate Marlboro or most other modern manufactured cigarettes accurately, is get some of the cheapest scrap Virginia bright leaf and a touch of basic, bad quality Burley (play with the blend a little to taste) - load it with a huge cocktail of chemical preservatives, casings and mild sweetening agents. Then load it with large amounts of free-base form nicotine prepared in a laboratory (natural base nicotine found in tobacco leaf doesn't combust easily, so you in fact get a much lower intake of nicotine from unadulterated, cured tobacco leaf).. then freeze dry it (as they do for storage in the factories) and thaw it out to then stuff into some really poor quality cigarette filter tubes (find the most papery tasting ones you can). Et voila, an authentic Marlboro. Or you could find some good quality, unadulterated tobaccos to blend good cigarettes. Yea, no cigarette is healthy, but manufactured cigarettes are enormously more harmful and taste like chemicals - so if you want to replicate that chemical, bland, bullshit flavour that's exactly what you need to do to your tobacco to achieve it, and they use the cheapest, worse possible tobaccos there are and almost always use some measure of sweetening agents or subtle flavouring additives to slightly alter taste.

[@pacheco464]

How much it cost a cigarette ? Mean how much you need to make a cigarrete

[@SimplySavvyLife]

I invested in this machine and like it a lot. I would make a recommendation to add a small guiding LED light by the tube insertion point which is lower on the device. Most people will place this in or on a tray , mine is higher than most at 2-3" which creates some depth and shadow but still .. especially if I'm using it in dim lighting , the brightness of the LED screen on top blinds me to the tube insertion point. I'd recommend lowering the brightness of the top screen and adding a small light to illuminate where you put the tube especially because it has to be on there precisely to work. I know you're not the manufacturer but if you sell them maybe you can feed this back to them

[@damienmason3807]

I don't smoke but this machine is crazy. I'm based in Australia but going to buy one for my dad. So it only takes King size rolls? It looks like you could punch out a pack of cigarettes in only 3 minutes.

[@ehotel]

Can this do vapes?

[@davelund115]

Price is alittle high.powermatic 2 works great and can be had for as little as 60bucks.i can tube up 10 packs in 45 min.

[@slimbruh]

I need an hour long video of someone doing this

[@legendindamakin5007]

Can u use this with weed and blunts?

[@IMKINDOFABIGDEAL13]

Yes you can get the brown cigarillo tubes and put in some fluffy ground weed that’s not too sticky And run it. Then cut the filter off with some sharp scissors and you got a perfect Mini blunt. You can get those cigarillo tubes in 100 size which are Longer

[@seanedwards6066]

when is powermatic 4 coming?..need bigger production

[@kibbz0214]

Thank you! My client at work has one of these, part of our job is to make him cigarettes! Haha.

[@dantelalanne9543]

The paper the cigarettes where do I get it

[@reluctant4116]

Cool device ! Do you deliver to germany?

[@GSP-76]

I had a hand held unit I used for a few months but got tired of it ..given how ridiculously expensive cigarettes are, I'm buying this ASAP.

[@guvensigarasarmamakineleri2607]

kzbin.info/www/bejne/emjIm6p4l9atpMU

[@dmprdctns]

Liked - Subscribed... Thanks... Very helpful... Can you say if the machine lasts a while by now? Still working? ...or how long did it last. Thanks again...

[@shutemdwn]

Does it come with the chemo discount?

[@shutemdwn]

"May"? It's a proven medical fact. Give me a break.

[@shutemdwn]

I'm not going to argue. Smoking is bad, mmmkay?

[@shutemdwn]

I still don't understand. Dumb it down a little more please.

[@shutemdwn]

Aww come on. I really want to start smoking again, but I think it would be a good idea if I could grasp this concept before I start. Don't give up on me.

[@shutemdwn]

I love how you just gloss over the fact that if you smoke you are 15-30 times more likely to get cancer and just throw a stat out there for the general population. Are you actually defending smoking? A child knows how bad it is for you. What's your point exactly? Are you offended by my comment? Do you have some interest in this rolling machine? What's the communication breakdown here?

[@kennethfranklin2151]

What was that matchine at the end

[@mohammadhakim4936]

Do you guys deliver it to sydney Australia as well?

[@Kylek323]

I need one of these, smoking 50+ cigs a day using a top o matic with the hand crank is taking up all my free time

[@viktorasjankovskis5157]

soon will be released PM5. but in my opinion PM3+ and lets say easymatic do the job better.

How many cigarettes does one need?

[@trinusaindoteknik2152]

how much it costs. and how to order.to indonesia. Thank

[@wayanebit8420]

Hello.. where do i get the foam machine ?? and at what price ??🙏

[@zCatalinAslan]

From where can i buy? I only fiind 3+ and i dont want 3+

[@randallanthony1794]

What’s the price for this machine

[@milkman2591]

I like the noises it makes

[@Marcel41021]

Does this also work with Marijuana?

[@MarilynRoscoe]

Not really. Marijuana tends to be too sticky.

[@tiredoldman5329]

Bought 2 from you guys. Thanks for the tobacco samples.

[@sheldonkirschbaum6213]

Hardest part is putting on crushed tubes, hemp paper burns much longer than cigarette paper cost about same.

[@RoofboxCamping]

Where do you buy the papers with filters for the machine

[@JacobParadis]

I start smoking back when I was 12 until I got caught several times not to smoke cigarettes so I quit smoking and I don't smoke anymore

[@ianstyles9759]

do you ship to the UK ?

[@dr.joint4204]

can it also roll jonts?? i like my tabacco with weed

[@Original1Thor]

Good question. I don't see why not.

[@moiistdaddy]

probably, gonna need pretty regular cleaning though.

[@lincs4life]

Only if your bud is super dry and not sticky else it would just jam up

[@malakaibrown94]

Super dry and good tubes for discrete spliff smoking

[@malakaibrown94]

Get some laramines or premier

[@blabbermouth777]

what is the point to having a machine that makes one cigarrtette at a time.

[@evelyng180]

It does roll 100’s really well. A lady posted a video on KZbin making great 100s with this machine. She did it at a 4 and 5

[@TobaccoLeavesStore]

make amazing tight 100's. it has settings for king, king+ and 100's. King+ justmakes a tighter king

[@ricoconti3141]

How much does it cost ?

[@whoville90]

can I use this for medical Marijuana ^.^

[@cap5macca5jack5]

No pothead

[@brokens1097]

I mentioned this before, no its not possible. No way, no how! Hundreds of people are causing enormous explosion's attempting to use dried plants other than tabaccco

[@1120stewart]

This just looks like too many things to go wrong. I’ll stick to my Powermatic 2. Been using mine every single night for over a year now without issue. Ordered a backup about 8 months ago because it was giving me trouble. Turns out I just didn’t have the hand of it yet. Been smooth sailing ever since

[@bluekillak1]

Can you put cigars in there

[@badboetie75]

@Leaves & Shredders you really should adjust your pricing in your description. I was interested until I saw your price in your website. I know you are working the price with supply and demand.... but holy crap. I'll possibly get it elsewhere for the $250.

[@doloresgomez8588]

Me pueden contestar en Español cuanto cuesta y donde la puedo pedir respuesta en Español porfa