How one house, in Wales UK, generates electricity from hydro and solar and by storing it in a battery bank does not need to take energy from the grid.
Пікірлер: 230
@johnfitzgerald39255 ай бұрын
How much did this project cost
@KEhydro5 ай бұрын
John, thanks for the question. The hydro, in 2013, cost £10,387.96 - an exhaustive breakdown of this total can be read at water-to-wire.blogspot.com/2014/12/cost-and-return_17.html The solar, in 2015, cost £5,649.32 The battery system, in 2023, cost £17,461.05 This is an all inclusive figure which includes all construction costs of the 'bunker' + alteration works to the pre-existing electrical layout + all costs of the kit required. I will try and do another 'exhaustive breakdown' and write it up in the blog for those who are interested. There have also been costs for 'supply critical spares' which probably come to £5k, - the idea in having these being that the installation should be good for ± 40 years. Against these outgoings, there have been 'incomings': for the 10 years the hydro has been working, it has earned £13,070.94 in FiT's, and the solar has earned £2,638.62 over its 8 years, - both figures are up to the present time; each FiT contract runs for 20 years and the tariffs increase yearly with RPI. Additional benefit arises from the 'cost saving' of electricity not purchased from the grid; you can read my estimate of this in 2018 at water-to-wire.blogspot.com/search/label/Offset where I estimated it was £546 per year. Since 2018, electricity prices are up, and the battery storage facility has been added, - so that £546 figure will now be too small an estimate. With the installation as it is now, we have taken only 14.6 units / kWh from the grid since 1st November last year (2023), so monthly electricity bills are now effectively only the cost of the daily charge for being connected to the grid (since 1st April 2024, £0.63 per day, inclusive of VAT @ 5%). I should add that, except for the solar installation, most (all !) of the work, ie: design, obtaining regulatory permissions, and construction, I did myself, - except where a qualified electrician was required for alterations to grid connections and house wiring. If I had had to pay someone, it would not have been worth doing but as it was, it gave me a lot of enjoyment, and not a little frustration, to bring it to completion. Come back if you want to know more !
@johnfitzgerald39254 ай бұрын
Thank you for the information
@deanc64714 ай бұрын
@@KEhydro I'm sorry, but if i'm reading this right. You paid over 33,000 pounds for the setup. You were paying around say 600 pounds per year in electricity from the grid prior. The cost of this setup = around 55 years of paying grid rates. The system MAY last 40 years if lucky though before needing to replace critical parts. You've made back about 15,000 pounds though in incomings is that right? I'm genuinely curious, I just want to know when the break even point is, because if i'm paying 20 years worth of grid electricity up front, and the system lasts that long it doesn't make sense. Thats whats happened to solar here in australia, it costs $20k to setup and over the 20 odd years a good panel lasts (including degradation) it saves you nothing due to their tariffs.
@KEhydro4 ай бұрын
@@deanc6471 Thanks for questioning the financial sense. I find it an impossible task to work out a financial justification, predicated as it has to be on past details which may no longer apply, and future predictions which are impossible to have certainty about. All one can do is make a stab at it based on averaged historical grid energy consumption, and using financial data which are true now. The key figure to get right is the figure for what we would have been paying, at 2024 rates, for energy taken from the grid, if we didn’t have any of the renewables now in existence. The figure has to be a 'guesstimate', - a 'guesstimate' because it is putting a cost on a situation that doesn’t actually exist, - but I can tell you what my ‘guesstimate’ would have been. From my records of how much energy we took from the grid before any of the renewables were implemented, each year we took 4,600 kWh of day time tariff energy and 4,000 kWh of night time energy. At 2024 rates for each tariff, these figures translate to a total cost of £2,350 annually. That figure includes VAT at the UK rate of 5%. £2,350 is a bit more than the £600 you were using for your calculation, and it will significantly change the calculation you were wanting to make about ‘the break even point’. I don’t propose to do the calculation for you, but if you do it, and arrive at a figure, please post a reply. If you do it, factor in that ‘incomings’ from Feed in Tariff payments will continue until 2033 (for the hydro) and 2035 (for the pv), increasing each year by the percentage change in the UK Retail Price Index. The increase for the financial year just started is 5.2%, but what it will be for future years you will have to read from your crystal ball. Another thing you’ll have to consult your crystal ball about is the future price of electricity, - if it goes up, then the time to ‘break even’ comes down. Let me leave it there; if you’re in need of a good crystal ball, I’m sure Amazon will have one somewhere, probably made in China. Thanks for your comment, it was a very valid question.
@RoHo7024 ай бұрын
@@deanc6471 A yank here... but for me, my off grid system isnt about coming out on top vs the power company, its that I dont care for the politics of the power company, then add in outages, and service wait times, and spending extra on an off grid system even though the grid is already on my property, was the right choice for me.
@elliot3305 ай бұрын
Stunningly neat install. Hats off to you or the tradesperson who did it. Deserves many more views than it has. Add micro hydro into the title, that would help 🙂
@KEhydro5 ай бұрын
Thanks for the compliments and the suggestion. I've now added micro hydro as a tag, - having just learnt how to do it !
@Astrojamus4 ай бұрын
@@KEhydro what does that mean ?
@KEhydro3 ай бұрын
@@Astrojamus apologies for not replying earlier, I missed seeing your comment. KEHydro was the KZbin tag I invented for the only other video I’ve posted. It is an abbreviation for Kisiizi Electricity Hydro.
@UK-Expat-in-USA3 ай бұрын
Thank you for the natural sounds, and no added disruptive music, I like the video!
@AdamPearce5 ай бұрын
This is spectacular. I very much appreciate the way everything is labled for clarity.
@KEhydro5 ай бұрын
...without labels, I wouldn't have a clue as to what's what, and when I'm dead and gone, no one else would have a clue either ! So labelling everything is part of my wishful hoping it could last 40 years or more !
@Haigy0075 ай бұрын
Quite possibly one of the best thought out and neatest installs I have ever seen! Awesome stuff.
@matthewlinsley1173 ай бұрын
I love the care so obvious in the system. In particular how all the nozzles are organized and labled. Very meticulous.
@PeterChasteen5 ай бұрын
Your video has such incredible timing, I've been exhaustively researching around for the best hydro generator for my new land purchase. With 30m of head, ~6Lps of flow, 60m (converted to your amazing metric system from my dirty imperial of course) of pipe the power spout you are showing is absolutely perfect! We should be returning around 400w only tapping the stream on the property for half its flow. If I keep an undersized jet on to limit flow and therefore keep the creek flowing below the intake for animals and my neighbors (good friends of mine) it should never need changed I suppose? Your spout storage and entire system for that matter are incredibly well done. Good work sir! The only other option I've found is a Canadian company or converting a washing machine motor (which though interesting doesn't look nearly as reliable and clean as an off the shelf model). Also, THANK YOU, for detailing your head and flow rates, that is the most difficult real world data to find in videos of people's hydro projects. Lastly, having checked out powerspouts website, they have the best micro hydro calculator on the internet hands down. This video is so very helpful. -All the best from the USA!
@KEhydro5 ай бұрын
Peter, - I well remember being at the stage you are at. The 'gestation phase' of a hydro scheme, if it is to be a good scheme, is the most challenging. Don't rush it. For me, learning that Powerspout turbines were available on the market was the piece of the jigsaw that allowed everything to come together. If you choose one, and your scheme's hydrology is good, you won't be disappointed.
@PeterChasteen5 ай бұрын
@@KEhydro I appreciate that sage advice. We're 9 months away from breaking ground and the research is years in the making already, more site visits to come in over this year in various seasons to get more flow numbers for a good average. My friend who currently owns the land states the flow changes some, but so far our measurements are at what he reckons are during the higher end of things (winter). I'll be getting more flow numbers in summer to get more of an average. And of course, we are installing a bifacial solar array to start out and then get more flow data over our first year before investing in the system. Having options seems to be key off grid. Thanks again.
@richdecibels4 ай бұрын
Extremely elegant engineering. Very well thought through -- especially the thorough labelling! Must be satisfying for you.
@videocity25085 ай бұрын
Absolutely amazing set up totally self-sufficient if absolutely and the worst case scenario grid power was to go down completely, and also prove that you can live without the grid. I tipped my hat to you good sir you have proven that if we can conceive it, he can achieve it👍
@mattpaissat2 ай бұрын
Fascinating... Very well planned, thought out and executed clean energy set up... Pure Genius... Shout out from PNG 🇵🇬... Thank you for sharing.
@duncannicholson18823 ай бұрын
Appreciate your setup. Well explained and neatly labelled...always think of the next man as my grandfather used to say(a plumber).
@thisguy29583 ай бұрын
I like the accurate labeling. This isnt a big deal to a lot of people...But coming from someone who refequently fixes other peoples' installs..This is great.
@ralphpremici76325 ай бұрын
A picture says a thousand words, Excellent. 👍👍👍
@finlaybichan12755 ай бұрын
this is brilliant, and fantastic filming too!! thanks!
@KEhydro5 ай бұрын
Thanks. It was a first time effort, so your comment is well received.
@Zoofactory3 ай бұрын
This is the first set up I’ve seen that runs quiet enough. Well done! 🎉
@ngson57093 ай бұрын
Truly a dream house. I wish I had a grandfather like that. Wishing you happiness and good health always!
@oops_player73284 ай бұрын
That sounds is so peaceful.
@digdilem4 ай бұрын
Fantastic install, lots of thought, planning and work has clearly gone into this. Thank you for making this and sharing it.
@tylerschutte49964 ай бұрын
This is goals. What an amazing setup! By far the cleanest setup ive ever seen!
@evgenim13 ай бұрын
В рекомендациях на 3 часа ночи. Пришлось смотреть до конца, оторваться невозможно. Уважение автору данного проекта. Золотые руки.
@TRS-Tech2 ай бұрын
What a well put together system. Great layout and everything nicely labled, it must have taken a lot of work. You have a beautiful home in a lovely part of the country and thank you for the nice peacefull video without blasting music. 👍
@xenonanonimus27574 ай бұрын
As an electrician and as a teacher, hat off from France 🎉
@complex_variation3 ай бұрын
Amazing! You are living my dream! For now I'm an electrical engineering student but something similar to your house is my objective! I love it, thank you for sharing!
@RzQc13 ай бұрын
Great work documenting!
@AndyM...5 ай бұрын
I'll echo the others regarding great video work, nice fluid movements, I'm not a huge talker either, so probably would have had inserted descriptions too. I've been off grid for nearly 6 years now with SMA gear, this alternative energy is addictive , good luck with any future upgrades !!!
@KEhydro5 ай бұрын
Thanks Andy, - is your scheme 'viewable' at all ? I'd be interested to see what you've done. Regarding future upgrades here, I feel as if I've now reached the summit that I'd been hoping to get to when still in the valley, - and there's no higher place to climb to ! But technology does keep moving on and creating new goals to aim for, - so yes, I suppose future upgrades have to be a possibility, - if I have the oomph to tackle them !
@AndyM...5 ай бұрын
@@KEhydro Hi Bill, I monitor my system from anywhere, but I don't have anything online for people to view so to speak. Basically I have 10kWp of solar, two 5 kW Sunny Boys and one 8kW Sunny Island. Coupled to all of this are 35kWh of BYD batteries. I do have an EV as well (Kia EV6) which gets charged exclusively from solar and occasionally from the batteries depending on weather conditions. All working superbly well so far !!! 🤠😎
@antihelix36275 ай бұрын
Nicely done. I wished i had land like that to realize something like this. Respect. Very nice.
@bibeksah49535 ай бұрын
This is such an awesome project and Thank You for giving such a detailed information about all the specifications!
@KEhydro5 ай бұрын
Thank you. It is only in the detail that such a video has usefulness to others, and that was my intention in making it.
@___aZa___4 ай бұрын
This is awesome! I've seen a lot of videos about "DIY" Energy Systems, but this is one of the coolest!
@samvalentine32063 ай бұрын
As others have said, this is one of the most amazing systems for generating your own power to be off-grid if you wish. What a great hobby and goal! This is how I would have liked to have done something like this had I similar assets. Well done, Sir! Wish I was there to help you install it! 😊
@TheTaff2243 ай бұрын
Nice video Bill - been some changes since I was last at the house....very impressive.
@kjm-ch7jc5 ай бұрын
These silent movies are great.
@KEhydro5 ай бұрын
Thank you. The truth is I didn't trust myself to doing a spoken commentary, and who wants music in a documentary intended to be informative !
@elliot3305 ай бұрын
@@KEhydro The video was great, maybe worth doing the audio after when editing the video? I would love to see and learn more about the stream, where it's collected from, and when it generates the most power (what months). The big catch tank. There's so much to learn from this. I've been reading your Blog, but would prefer to listen to you describing it. FIT tariffs etc. Even if it's just a slide show of the installation and voice-over.
@KEhydro5 ай бұрын
@@elliot330 It's all in the blog, - but might take a bit of finding ! Photos of the installation being done are viewable on the access button provided on the blog.
@cashewABCD5 ай бұрын
You did great, everything labeled.
@markmonroe73305 ай бұрын
Excellent presentation, Thank you. Absolutely loving the blog website.
@oznerol2563 ай бұрын
Absurdly neat install. Everything buried. Looks way better than all the above ground systems you see elsewhere on KZbin. Surely this will also survive harsh weather way better
@izayaorihara70593 ай бұрын
One day... A wonderful documentation, thanks.
@WowCoolHorse4 ай бұрын
I love how well documented the components are.
@jason30644 ай бұрын
This was cool as hell. Neatly done and a great addition to any home. Thanks for sharing✊🏾
@FreeFinca3 ай бұрын
Good to see the dog supervision.
@Gratefulwon5 ай бұрын
Absolutely a great piece of engineering! Bravo!
@mirsphoto4 ай бұрын
This is a blessing, such a peaceful environment. I love water flows and redirecting them to purpose. I have lots of solar panels at roof about 20KW. Although I saw the 85% ratio of the invertor to hyrdro. still I was expecting alot more KW generated through that much of water flow and how fast it was flowing, in no way I am engineer or have background knowledge of hydro just through observation I was kinda of hoping alot more production like 5 6 KW of generation. I suppose with solar you have the sun out and get the KW where in hydro you just have the consistent generation unless it the water dries up. Really loved the setup!! if you were to upgrade 10 years down the track, dont forget to look at Fronius models too if its sold in UK.
@seanmiles86195 ай бұрын
Brilliant use of Solar and Hydro.. Very cool.
@Totototo-nr8dh3 ай бұрын
Very very nice installation!
@matthewspencer78495 ай бұрын
What an awesome design and a great use of the natural resource of the stream running through the property
@connorferguson22694 ай бұрын
This is a very efficient set up bill, I'm impressed.
@bogarth084 ай бұрын
love the engineering, from the micro hidro-power plant to the tenis ball hanging from the ceiling
@bwilson9485 ай бұрын
Thank you for sharing a great video.
@FletaNagine4 ай бұрын
your video just made my day better! ☀️
@SX9394 ай бұрын
Very nice, well thought out system.
@MrMAKFoto3 ай бұрын
1:57 I thought I'm watching someone from Afghanistan or North western Pakistan, the cap cracked me up, great engineering too.👍
@iNireus20 күн бұрын
It was at 4mins 20sec the cabinet door opens & I see the organisational level that I decided to hit subscribe
@ibrahimdia27694 ай бұрын
Thank you dear, you did as a great job as thé great man you are.❤
@heatpumpman3 ай бұрын
Beautiful place!
@theonlyfox42754 ай бұрын
Hey, an electrician from Germany here. Realy nice Installation, some things like the 1x insulated flex Wires in your house would't be allowed here in Germany but nothing dramatic. Just one question/reminder, i cant make out if the earth is normal copper felx wire H07V-K or double insulated NYM-J both should not be but underground especially not for the main earth, because of corosion. It has to be Stainless Steel (V4A) or Aluminium until it comes out of the ground. I hope that iam not wrong but please check that. All in all real nice Installation and neat idea.
@justinharstvedt37243 ай бұрын
If you were interested I’m sure a lot of people would enjoy it if you set up glamping tents and allow people to come visit and get a tour while staying in on off grid experience with your home made electricity ⚡️
@BerlietGBC5 ай бұрын
Outstanding installation, only have solar sadly but a upgrade to that is on the cards
@alexanderye77053 ай бұрын
Thank you for the shared details and the calculations provided! I can't help but to ask what is the voltage in the wires from the hydroplant? Maybe it worth to install the inverter next to the plant and significantly decrease the loss in the DC cables to your house, sir? Another point was to head the solar panels to the ideal south in a comb-like installation? I do understand that from the mechanical wind pressure, etc, the flat-roof-installation is the preferred one, but taking into acc the efficiency of the panels it would bring some benefits as well. E.g., it might be possible to lift one row (2-3) of the panels only to check the theory in the action. Special thanks for the isolated ground installation! I really enjoyed it being placed into a constantly wet soil.
@0055-g3i3 ай бұрын
Excellent
@Thingamajigs4 ай бұрын
Ledbury? fairly local to me. I have a 600w solar installation i did, nothing to this degree though. I use it to power a portable LifePo4 setup i built that runs on tasmota. It acts as a UPS system and, on full state of charge, automatically cuts it's grid supply to allow consumption of battery (solar) power. Nowhere near this level of advanced or big, but still, it's a start. Thanks for sharing!
@KEhydro4 ай бұрын
Thanks for commenting. If you're interested, you can read more about Percy Pitman at www.bosburyhistoryresource.org.uk/PH-Percy-Hector-Pitman.html
@raymondmichael49875 ай бұрын
Such awesome environments, I love to live there and die there. nature 😊
@woiru88154 ай бұрын
awesome stuff you got there sir
@tomduncan35475 ай бұрын
Very well done with the install.
@lLoliRuli3 ай бұрын
This video has been blessed by the KZbin algorithm. It has been trying really hard to recommend this video to me.
@leexgx5 ай бұрын
Very nice setup constant 800w of power + solar later and a 10kwh battery pack could probably run most smaller houses grid free but with the solar pannels I imagine full house like that it would hardly use grid Our house can only be solar only both are unfortunately not ideal location front roof is run rising direction (it's not possible to use rear side of the roof due to extention, if we could that would have been 3.6kw on both sides with 7.2kw single dual mppt inverter but unfortunately no) second one is the shed where I managed to install 3kw on it (it was a pigeon shed it was kinda long until the end of it was removed) , it is technically correct direction but I have the angle quite sloped flat ish due to not wanting to upset the neighbours back garden sun light (they still don't know it has solar pannels on it because put back box on the rack so just looks slightly taller shed with a new roof) 5kw solar with 3600 inverter + 3kw solar on the shed(both are sunny boy 3600 inverters might try getting extra 2 or 4 pannels on the shed, we are allowed 7.2-8kw on export I believe) could do with battery's to handle night time loads
@Thefreakyfreek4 ай бұрын
Love how dirty and almost abandoned most of this stuf looks seems to be minual maintenance. Like it suposed to be
@kahwigulum3 ай бұрын
I invite you to look up what Kris Harbour has done in Wales. He has consolidated the nozzles into an adjustable fixture that can be increased or decreased in diameter via wifi given the amount of flow from his stream. I've seen a lot of variety in water turbines, but I think his is the best designed and most resilient (and efficient) set up I've seen.
@iindium492 ай бұрын
I was surprised to see the grid power.
@mikusion5 ай бұрын
old house, yet modern ;) good engineering for sure
@Sylvan_dB5 ай бұрын
I love it! Makes me wish for some elevation on my property. Mine varies by less than two feet between high and low point.
@mosesgoiho62404 ай бұрын
Try waterwheel system. It can work for you. He is using pressure from the water water; you on the other hand can use the weight of the water to harness energy . You may end up with some few hundred watts but with that 24/7, you are in for a good ride.
@jeremyjedynak5 ай бұрын
Very nice setup!
@MorensTub4 ай бұрын
Felicitaciones buen hombre, usted esta listo para ir a colonizar Marte. Excelente video, saludos desde Argentina.
@totherarf5 ай бұрын
I work for a DNO and that is one of the best setups i have seen! The only thing I would question is why you need dump loads and what they are? Do you ever actually need to use them or can you throttle your generation down to match your usage? I would guess that you occasionally do need to use them as your hydro is constant, but it might just balance with your battery set up! Got to say I am a bit jealous ...... Well done!
@KEhydro5 ай бұрын
Thanks for your comment; coming from a 'pro' like yourself, it carries weight for an amateur. The loads you refer to are not really dump loads but diversion loads; power is sent to them whenever Solarcache detects power is going out from the house toward the grid connection point; power will leave the house and be fed to the grid in this way when there is more 'home generation' than is required by the loads in the house which happen to be ON at any given moment; and what these diversion loads do is minimise grid feed-in by maximising retention of generated electricity for beneficial usage in the house. The white boxes you see in the film are 'throttles' controlling the power going to the loads; they are not the loads themselves; the power the 'throttles' feed to their loads is pulse width modulated, and is thus infinitely variable; by having complete control of how much power is fed to the diversion loads by PWM, Solarcache can precisely control what flows out of the house toward the grid connection point., - and this it keeps to ± 60 W. I keep saying "toward the grid connection point' for a reason: the power Solacache allows to leave the house doesn't actually reach the grid connection point because it gets picked up in the 'Battery Bunker' by the Sunny Home Manager, and is diverted to charging the battery. Sunny Home Manager is the real 'gate keeper' of power flow at the grid connection point and it rigorously maintains a regime of 'zero export and zero import', - unless of course, the battery SOC is 100%, in which case grid feed-in will occur, - or if loads within the house exceed the power that can be provided by power from hydro + solar + battery, in which case power will be drawn from the grid. All of this 'operational logic' might be clearer if you study the diagram at the very bottom of this blog post: water-to-wire.blogspot.com/2023/12/battery-storage-completed.html If you want to understand more, do get back again.
@totherarf5 ай бұрын
@@KEhydro That was a good read .... does that make me a pedant? ;o) The only thing I would add (small point) is that you seem to have a "White meter" The tariff for this in your situation is not good .... changing tariff might be worth looking at? Especially as it is an old meter (they should be changed every 10 years so your supplier will be looking to install a "smart meter"! This might not be in your best interests!
@KEhydro5 ай бұрын
@@totherarf There is a benefit from having an old 'spinning disc' white meter, and insofar as there's a benefit, there's a reason for my wanting to keep it. The 'gate keeper' at the grid connection point (SHM) is rigorous, as I've said, in preventing import or export; but it cannot absolutely prevent a few Watts coming in or going out; what it does achieve precisely is zero movement of power at the grid connection point over a period of time; if there was a Smart meter there, every few Watts of grid import that SHM allows to be in-coming would be registered as energy taken from the grid, but every few Watts of export SHM allows out-bound would not wind the digital counter of a Smart meter backwards. In contrast to this, with the spinning disc meter you saw, although it is ratcheted and cannot go backwards indefinitely, it will go back part of a revolution until it hits its ratcheted stop; so with the way SHM is constantly allowing a few Watts in, and a few Watts out, this allows the disc to oscillate very slowly (slowly because we're talking about
@totherarf5 ай бұрын
@@KEhydro It is nice to see someone who actually understands what they are saying rather than pump out generalisations! I am in a similar situation, but do import more than I make. When setting it up they wanted me to get feed in tariffs and were surprised when I told them I would store all my excess for a later time! Unfortunately for me hydro is not an option and people would object to any sizeable wind turbine in my area! You have to work with what you've got!
@jools23233 ай бұрын
Great Video!
@nexttonic64594 ай бұрын
This is a nice system.
@fablearchitect76454 ай бұрын
This vid gave me unintentional ASMR
@hugo51493 ай бұрын
Thank you for the video, excellently constructed. The river I live next to is situated in conditions very similar to yours, around 60 meter drop and comparable flow during the dry season, in that season the water is crystalline like yours. During the rain season the river becomes red with clay and much more powerful, I am wondering if this would be a problem for the turbine? Clay particles and other very small debris dissolved in the water. I have considered 2 ways of solving this, constructing a series of check dams to slow down the water and let the clay sediment in the bottom or constructing a concrete channel with filtrating media, have you gone through solving a similar problem?
@KEhydro3 ай бұрын
I don't think the suspended matter, especially if it is only suspended clay, will be too much of a problem. I know of two Powerspout peltons, one of which has been in operation >10 years, which get really hammered by abrasives, - not just clay but grit. Their pelton runners and nozzles obviously don't stay as pristine as with cleaner water, but these parts are accepted as being 'wearing' parts which can easily be replaced. For you to plan to replace as necessary will likely be a more 'do-able' option than the de-silting arrangements you mention. Don't forget your check dams will not be maintenance-free, - they will silt up and need digging out. Even with the relatively clean water my scheme uses, the header tank still collects quite a bit of silt; I clean it out each year, - see water-to-wire.blogspot.com/2015/10/end-of-water-year.html I hope this helps. Good luck with developing your scheme.
@Shahzada3 ай бұрын
Nice chitrali cap
@user-zu1ix3yq2w3 ай бұрын
Gravity is amazing
@woodzyfox47355 ай бұрын
nice numbers! If you have a AC inverter at the turbine box, you would have almost no voltage drop. and get more amps to the house
@Sidicas4 ай бұрын
From now on when people say they are from Whales, we will think they are living in a shack down by the river.
@Karaon4 ай бұрын
Narwhals
@peterwooldridge72855 ай бұрын
Thanks. Like Johnfitzgerald above I'd be interested in cost and also how often is hrid power required. Nice countryside...surprisingly not many birds(?)
@KEhydro5 ай бұрын
Peter, - can I direct you to the reply I gave to John F for the costs involved. Regarding 'how often grid power is required', this is a question that only the passage of time will answer as we work through a full year of having the installation as it now is. You can read my thoughts of how it might pan out at: water-to-wire.blogspot.com/2024/02/benefitting-from-battery-storage.html Regarding 'not many birds' - half of them (the female half) are probably on their nests at this time of year (!) - but there are many about in the woods here. I saw a Tree creeper last week, - which is a bird not often seen.
@fins51505 ай бұрын
Well thought out. How many reiterations did you go through to get to this point?
@mickwolf10774 ай бұрын
nice setup
@daveb39104 ай бұрын
Very nice
@Denar864 ай бұрын
Хорошая работа!!! Моё уважение!! Привет из России!!
@KEhydro4 ай бұрын
Спасибо
@jyj85522 ай бұрын
효율과 관리측면에서 전력상계를 통한 계통연계가 훨씬효올이 좋습니다.
@KEhydro2 ай бұрын
예, 전력 상쇄가 더 나을 수도 있지만 우리나라에서는 전력망에 전력을 공급하는 데 대해 소형 발전기가 보상받는 방식이 아닙니다.
@ronm65854 ай бұрын
Thank you.
@paulbaker31443 ай бұрын
Why was the high pitched sound from the turbine again? Is that putting out 400 volts? It is the most meticulous system I’ve seen. Exemplary data monitoring.
@KEhydro3 ай бұрын
Magnetostriction. Magnetostriction is a manifestation of energy loss, in the form of noise, caused by the miniscule changes in dimension that occur in ferromagnetic materials subjected to a changing magnetic field. It is heard as a whine because the permanent magnet alternator (PMA) generates 3 phase ac at a frequency of several hundred Hertz; by contrast mains ac, at 50 Hz, only produces a hum. The generated ac frequency is high because there are 42 stator poles and 56 magnets passing over those poles at approximately 1000rpm. The 3 phase ac output of the PMA gets rectified to dc, at a voltage which is between 220 and 315 v dc, - the variation depending on how much power is being produced, - which itself depends on how much water is hitting the pelton wheel. The noisy whine is only evident at high levels (high that is for this turbine !) when water flow to the pelton wheel is above 2.5 l/s.
@adamfrbs92595 ай бұрын
People always think of batteries for storage...but technically you could pump that water back uphill to a manmade lake you create when you don't need the power and the lake would essentially become your "battery", storing the energy for whenever you want to drain some off for power.
@paradiselost99465 ай бұрын
or you could run a synchronous generator at a fixed RPM, with a governed nozzle so water consumption is equal to power consumed...
@adamfrbs92595 ай бұрын
@paradiselost9946 you wanna swap nozzles everytime the AC kicks on?...., otherwise you have extra power when it's off.
@paradiselost99465 ай бұрын
@@adamfrbs9259 you obviously have never heard of needle valves. should look into how they make nozzles on REAL hydro generators. they dont fart arse around with changing nozzles to "suit seasonal variations".
@adamfrbs92594 ай бұрын
@paradiselost9946 meh, you've missed the original point. You could store massive amounts of energy my way at essentially zero cost, with minimal loss compared to massive banks of batteries and their inherent losses. Any dry spell and your way is immediately out of luck, my way you can run off the reservoir for as long as you want depending how large you make it. Your way is like solar style, works great until cloudy, my way could run non stop even if the creek dries up for awhile.
@paradiselost99464 ай бұрын
@@adamfrbs9259 and you miss the point that my way is the same way its done on a commercial scale and involves no batteries, and as it only uses as much water as the load demands at any time, tends to work on relatively low flow when done properly. the dam is where the energy is stored. the only hassle is governing with as little hysteresis and huntingas possible. people seem to have lost the ability to make things like that with out relying on some microcontroller or other electronics. or wanting wifi connectivity or some sort of BS like that.
@liveuk5 ай бұрын
Very nice, well done. Auto nozzle adjustment by an Arduino would be a great next step.
@ArnaudMEURET4 ай бұрын
I was wondering how often he swaps the nozzles over the course of the year. I think that even a manually-adjusted nozzle would be much more convenient than having to divert the flow and screw the better nozzle back in.
@KEhydro4 ай бұрын
@@ArnaudMEURET You are right ! - having to change nozzles is something of a handicap - to answer your question, over the last 8 years the average number of changes in a 12 month period is 30, with the range being 39 to 16. I only change the bottom nozzle; the top one is never changed but it can be turned on, or not turned on, in conjunction with the bottom one. The top one is machined to deliver 0.3 l/s. The gradations in orifice size of the nozzles used in the bottom position are also machined to give increments in flow of 0.3 l/s. With these characteristics, when flow is increasing, I can determine when to place a bigger nozzle in the bottom position by using the top nozzle to 'sample' if there is sufficient water for the next bigger nozzle to be placed in the bottom position. When flow is decreasing, the time to change the bottom nozzle for a smaller one is determined by noting that the header tank is beginning to be no longer full. The pattern of how flow changes through the year is remarkably predictable: it is either increasing or it is decreasing, and it increases or decreases in a steady and leisurely way. There are no sudden changes on a day-to-day timescale. This pattern comes as a result of the source being a spring, which is discharging from groundwater held in the hillside; movements in groundwater levels are never sudden. Your suggestion of a manually-adjusted nozzle is a good suggestion, - either a conventional spear valve type, or the type which has a variable orifice along the lines of a camera's aperture adjustment. But either of these would be less efficient than a smooth-walled, straight-through, conical nozzle (by less efficient I mean there would be a greater energy loss at the nozzle) and in a system as small as this, where energy losses need to be kept to an absolute minimum to make the scheme worthwhile, I'm not sure the gain in convenience would be worth the loss in energy generated. Changing a nozzle is a very quick and easy job, but you do need smallish hands, and as you have pointed out, you do need the perception that it is NOT an inconvenience ! Thanks very much for your comment.
@bowenfibre5 ай бұрын
This video was incredibly amazing I learnt a lot. Just a thought or a questions, where the water is going out to the stream again after being used, couldn't you add maybe another or another of sorts but in a lower power consumption? I'm purely curious as to what you think and if it would be possible to do so? I hope to hear fro you.
@anasqai3 ай бұрын
If to add each water point of a house to be having the spinning electricity creation at the same time To a power bank? It's nice if have to live this way, then secretly making electricity ownself that bypass their desire of "control" into a bad life experience.
@CCerwin4 ай бұрын
When can I move in the guest house or at least visit for holiday please 🙏
@fje19485 ай бұрын
Congratulations!
@markpennella3 ай бұрын
Have you thought of building a little shed over your 120 year old wheel?
@KEhydro3 ай бұрын
When it rains, the upward facing cups of the 120 year old wheel fill with water; when that happens the wheel, apparently without any motive force, starts to turn ! It is something I like to see ! Putting a shed over it would deprive me of a small enjoyment ! The wheel has many layers of paint on it, - I don't think it will suffer from being exposed. Thanks for commenting.
@ketas3 ай бұрын
finally a microhydro setup which does 400v. and bats too. some argue how it's safer at 48v but losses are huge. and you aren't spared from 400v anyway i love decent systems tho, it seems like battery room is doorless, is that good, even if climate allows it?
@KEhydro3 ай бұрын
Thanks for commenting, - your noting there is 'no door' is a relevant observation. Climate-wise, the temperature in the battery room is shielded from the worst extremes of hot and cold by being, in effect, underground. For my own interest in the matter, I'm monitoring temperature with a max / min thermometer to see what extremes are reached. Security-wise, not having a door does create a risk - the components of the system could get stolen, - but if they are stolen they are replaceable; the real value of the setup lies in the location and the 'infra-structure', - and nobody can walk away with those !
@ketas3 ай бұрын
well not much of about getting stolen, that looks like place where that's not an issue, more about some animals maybe?
@sarreqteryx3 ай бұрын
THAT TURBINE'S LOUD AS ALL-FUCK, THOUGH
@69Buddha3 ай бұрын
Good reason to drop it 190m downhill from the house. ;-)
@JohnSmith-pl2bkАй бұрын
@KEhydro 2 months ago Magnetostriction. Magnetostriction is a manifestation of energy loss, in the form of noise, caused by the miniscule changes in dimension that occur in ferromagnetic materials subjected to a changing magnetic field. It is heard as a whine because the permanent magnet alternator (PMA) generates 3 phase ac at a frequency of several hundred Hertz; by contrast mains ac, at 50 Hz, only produces a hum. The generated ac frequency is high because there are 42 stator poles and 56 magnets passing over those poles at approximately 1000rpm. The 3 phase ac output of the PMA gets rectified to dc, at a voltage which is between 220 and 315 v dc, - the variation depending on how much power is being produced, - which itself depends on how much water is hitting the pelton wheel. The noisy whine is only evident at high levels (high that is for this turbine !) when water flow to the pelton wheel is above 2.5 l/s
@mikep.coplin68004 ай бұрын
You would get more KZbin views if your word font color (white) didn't blend into the back ground. I could not read the words, but it looks like a interesting set up. You should try light green font or box it in with a lighter back ground color, hop this helps.
@colincrooky4 ай бұрын
Would it not be better if the outflow pipe had a larger diameter to prevent back pressure? Do not ask me as I am not an engineer. Thank you for great video.
@JohnSmith-pl2bkАй бұрын
An ordinary 90mm downpipe on a house that empties gutter water copes with more no need for huge pipes as once it leaves the housing it flows downhill by gravity...
@turquoisediamond16683 ай бұрын
Hi Bill Cave! I'm amazed. Do U have any paper published or any references U used?!
@KEhydro3 ай бұрын
You can find two documents, covering the wiring schematic and the communications diagram for the 'battery bunker', in this blog post: water-to-wire.blogspot.com/2023/12/battery-storage-completed.html The documents come at the very bottom of the post. The wiring diagram was based on an on-line document from March 2021, published by the Institution of Engineering and Technology (IET) which you can find at: electrical.theiet.org/wiring-matters/years/2021/84-march-2021/island-mode-earthing-arrangements-new-guidance-in-the-second-edition-of-the-iet-code-of-practice-on-electrical-energy-storage-systems/ I hope these help you.
@turquoisediamond16683 ай бұрын
@@KEhydro Thanks a lot. I live in south east asia. The potential of RE is high. I'm still in the research phase about RE tho.
@PROMAUTOMATIKA5 ай бұрын
Good job!
@paaao4 ай бұрын
As an electrician, I've considered doing something like this for an off grid cabin/home, but is your turbine delivering AC or DC? I was always thinking of doing a 240Vac turbine, that would feed an AC load center/panel, for powering the fridge, HVAC, and washer/dryer, and some receptacles. Then also 120Vac to 48Vdc charging circuits to feed large battery banks. The battery banks would feed DC sub panels with buck converters for dropping the 48Vdc to 24/12/5Vdc and then circuits for 24Vdc lighting, 12Vdc appliances and convenience, and 5V usb outlets. This way the turbine would not only power my heavy AC appliances and motors, it would also constantly keep batteries topped off that deliver power to all my lighting, electronics, and anything else I could keep running on low volt DC power.
@KEhydro4 ай бұрын
The permanent magnet alternator on the shaft of the pelton generates 3 phase ac. This ac is of variable frequency because the shaft speed is different for the different flow conditions which occur through the seasons. This variation in frequency doesn't matter because the 3 phase is rectified and smoothed to dc before leaving the turbine housing. The resulting dc power passes to the house at between 200 and 330 volts. At the house an ordinary grid connected wind turbine inverter, though it can also be an ordinary solar pv inverter, converts the incoming dc to 240 v mains ac at 50 Hz. These are the figures for grid voltage and frequency here in the UK. Best of luck with your project.
@paaao4 ай бұрын
@@KEhydro Got it thanks. So probably not able to receive a consistent single phase 240Vac @ 60 hz is what I'm hearing. I'll have to look into it more.. I'd love to find a way to avoid converting AC to DC only to invert it back again for all the AC appliances. Maybe this is not possible...
@JohnSmith-pl2bkАй бұрын
@@paaao If you have large enough wires you can send the rectified 60VDC uphill and only convert it via the inverter up there that ties your batteries, solar, hydro and emergency generator...into 240VAC 120VAC @ 60hz....