Powerstop caliper replacement rookie mistake! Brakes wouldn’t bleed or build pressure because the calipers were on the wrong side. The bleeder valves have to be on the top of the caliper to allow air to escape.
Пікірлер: 107
@tombro4u2 жыл бұрын
thank you! I did the same thing! I really like how you said dummy. it applied to me perfectly!
@quickstrike98ify3 ай бұрын
Thanks! Im about to do mine, and you saved me the possible mistake.
@James1101933 жыл бұрын
Don't worry man.. ended up putting a master cylinder on thinking it was bad.. but nope upside down caliper 😂
@victorcordero14583 жыл бұрын
Do i need to upgrade my master cylinder if i want this setup
@x-i-clap-ttvs7876 Жыл бұрын
@@victorcordero1458no unless theirs something wrong with it
@All_Amin9 ай бұрын
@@victorcordero1458not at all
@noahpilcher2227Ай бұрын
This weekend I learned this lesson the hard way…after trying to “bleed” the brakes for two days.
@patricksalsberry91886 ай бұрын
Dude you just helped me figure out my issue!!!
@briankable2713 Жыл бұрын
That is why you look at your parts before you start
@MattyH64 Жыл бұрын
Exactly. Is it too hard to just compare the parts and not assume that it will fit because it said so or it seems like it? I had this happen with myself a few times.
@curtishardy13947 ай бұрын
I noticed as soon as I pulled mine out of the box and put them side by side
@jonathannajera10159 ай бұрын
Planning on doing this literally next week to my suburban too so happy I saw this video because I would've gone crazy 😭😭 thank you!! 🙏🏼
@octaviomorales7122 Жыл бұрын
that’s one of the first things they taught me at my shop bleeder is always UP!!!!
@cuzynot1 Жыл бұрын
Was just about to order some, thanks for the tip
@willsosa4074Ай бұрын
mannnn, Replaced the master cylinder and sent back the calipers I bought for replacements thinking they were defective just for me to notice the marking on the 2nd install haha. At least I can brake now lol
@EmptyPocketProductions Жыл бұрын
"Son of a bitch, you're welcome" Instantly subbed !
@Whatitdomf2 ай бұрын
SOB!! Thanks for saving me some time and money 🤘🏽🤘🏽
@ferverrel55194 ай бұрын
Just ordered a kit today glad I saw this
@williamsantiago7303 Жыл бұрын
At least you're honest buddy 😅😅😅😅
@DunnweldingАй бұрын
i wish i had seen this before my install!!! i hate taking off and re-installing 37x12.5x20's in 110 degree heat
@ArrowTheTrailDogАй бұрын
I M about to install those in 2 days. Glad i found this. Wonder if it marks driver passenger like it does for rotors. Parts are coming tomorrow. And yeah, the original calipers on my car has bleed valve upward.
@SSstunt14 ай бұрын
Been searching for this video thanks big hell
@guyfoster-cn1fp2 ай бұрын
If I'm not mistaken, they should of been marked. I definitely remember that the rotors were
@TheGhettoCowboyOG4 ай бұрын
Rotor is also on the wrong side . Slotted rotors ARE directional . Also SPECIFICALLY for the left or right sides . Good luck y’all .
@racequad92 ай бұрын
I hope he noticed this before completing
@burbeast2 ай бұрын
@@TheGhettoCowboyOG notice the sticker on the rotor says drivers side front… the calipers however were not labeled. Honest mistake.
@TheGhettoCowboyOG2 ай бұрын
I can see the sticker , just not what it says . Haha , but with that said … this is the best way most of us here learn . By trying , goofing it up and going nuts for awhile figuring it out . And when it’s something this easy to fix and seems so simple in hindsight we feel like a loony toon . But you never forget the lesson !
@mickaelgossart44673 ай бұрын
Thank you
@mareksv1947 Жыл бұрын
I just ordered 2 right side brake calipers :D Have no time to wait for the left one, so if it gonna fit, I gonna try to bleed the caliper of the brake disk with a hose and spray bottle
@1bln-oz4yn Жыл бұрын
Good call brotha
@zayugh7 ай бұрын
I just ordered mine, thanks I probably would have done the same thing if not for my luck. 😂
@gerapic25ify Жыл бұрын
Thank you for the Info' good to know.
@JoseMartinez-tz1ln Жыл бұрын
Thank you for the heads up!!! 💪
@andrewpayne2811 Жыл бұрын
Thanks for the honest heads up!!
@Dr_Kenneth_Noisewater Жыл бұрын
Thanks! If a mistake can be made, I woulda made it.
@Mainefishin2 ай бұрын
Haha thanks! I’m a dummy too. Saved me a trip to the brake shop 😂
@Queensraces9 ай бұрын
I respect it i never heard thsi and ive done mad brake jobs😂
@LambiWantsTaxIncreas Жыл бұрын
Thanks for this!!!!
@joshuareedbarber69132 ай бұрын
That dummy felt personal 😂
@mklimu9 ай бұрын
Thank you.
@STROKED.Ай бұрын
Your disc brake rotor on the wrong side. The forward rotation should be with the groove lines going forwards. Not trailing.
@twosavage222 ай бұрын
Yes, I did 😂 thank you sir
@jaimegastelum-angulo10575 ай бұрын
Damn it! Gotta do it all over again.
@MaximumEffort6326 ай бұрын
Bleeder always go up
@sal.m4147 Жыл бұрын
High performers rotors are left and right too Keep that in mind
@aaronferguson9328 Жыл бұрын
good rule of thumb with learning bleeding, your only out more fluid, more time, thats the worst that cn happen
@billreed3265 Жыл бұрын
😮thanks bro 👍
@ThEres-MoRe-tO-LifE Жыл бұрын
Thanks man
@transam86078 ай бұрын
Bin there done that's a ✔ off the bad list. And the worst part about it. It was that i knew about that and I double checked before putting them on and i still messed up. That's like a bad day and the mind not working. Maybe i was freezing or really tired or just having a really bad day.
@Sitchy775 ай бұрын
I like this dude😂
@marcelmignault542510 ай бұрын
Wish i saw this before i did my brakes... Would've saved me an hour at LEAST.
@rastaboy86693 ай бұрын
Lol brev i changed everything in the braking system to find out i did the same thing lol 😂
@Proj3ctLife4 ай бұрын
I have these on the way for my acura tl. Im going to put as much masking tape as I can to avoid brake fluid getting on the red paint. You think thats overkill?
@yahzchild144k Жыл бұрын
Is this only for suburban
@tommyd6665Ай бұрын
Always take pictures before you remove parts …
@manderson717310 ай бұрын
It’s OK looks like you’re gonna need some more grease on those pads and calipers anyway
@Hugolopez732 Жыл бұрын
Do these make a big difference in stopping?
@bobcolunga69785 ай бұрын
Hey man how’d that setup work out for you? Been looking for updates on how these caliper kits hold up before I purchase them but can’t find anything on them.
@Mr.-Sir Жыл бұрын
He didn't read the destructions! 😅
@anrae19 ай бұрын
I came close on my ford raptor once
@adanortega57739 ай бұрын
Can u run a 15” wheel?
@RobSmith-b8k14 күн бұрын
Okay but finish the video on your ratings of them
@antoniorodriguez591611 ай бұрын
Some things you just don’t tell.
@EvanDawes-t2l2 ай бұрын
I’ve done the same😂
@luisarzola7412 Жыл бұрын
Damn I know I did something wrong I went and bought new break booster put new lines new pedal 😂😂😂 I’m so mad 😂😂
@losfreedom7069 Жыл бұрын
I have power stop for my 2015 challenger & my calipers pin has went out twice now Have you ever had this problem?
@burbeast Жыл бұрын
no, still going strong
@lifeandThings Жыл бұрын
A lot of videos I watch the installer uses the old (original) pins. This may help....
@losfreedom7069 Жыл бұрын
I’m on 32” wheels so needed extra stopping power
@burbeast Жыл бұрын
lol 32"s on a challenger! Nice!
@CharmBlood56 ай бұрын
Rusty ass jack stand nice safety
@charleshoover85082 ай бұрын
You should put the tools down and never touch them again.
@burbeast2 ай бұрын
@@charleshoover8508 you’re a tool, so there’s that.
@ImageThisPhoto9 ай бұрын
Lol. Thanks!
@kenarbor561911 ай бұрын
I did it too…..going too fast
@cruz09freedom95 Жыл бұрын
Bro I get driver side wrong but the all 3 are good
@chrisr.986 Жыл бұрын
Thank you that stinks!
@garystump5680 Жыл бұрын
My set father did the same shit with his suburban took then a day to figure it out😂
@Mattmazz7711 ай бұрын
For a novice do it yourselfer it's a common mistake 😂 But if you're an above average shade tree mechanic or you actually work as a tech somewhere, you better know that there is a left and right side caliper. Regardless a tech should definitely know the bleeder screw goes up or you'll never get the air out. But then again your everyday tech will make mistakes. No one is perfect...lol.
@saturnmedia14 жыл бұрын
Lmfao. Yes, put the left caliper on the left side. And the right caliper on the right side. Brilliant. Truly brilliant.
@burbeast4 жыл бұрын
Lol, This was my first time installing calipers and they weren’t labeled. Figured someone else was scratching their head... hope this helps 🤣
@nickdoescher9957 Жыл бұрын
Maybe instal you rotors the right way too
@jimmybasil896511 ай бұрын
Hey dude it happens, learn from our mistakes and move on
@MartinGonzalez-sl2kj Жыл бұрын
Well fk!😂😂
@burbeast Жыл бұрын
yup
@Toyotaguy999 Жыл бұрын
Pay attention to how you yake things apart
@ASEWorldClassTech11 ай бұрын
LOL ROOKIE!!!!
@tommygunn87 Жыл бұрын
How have the calipers held up? Hows the paint holding up?
@burbeast Жыл бұрын
Still look great, no complaints!
@deekaay5561 Жыл бұрын
😂😂😂yea thanks man
@Засланныйказачок-с7г11 ай бұрын
Just regular American service
@218Kasper Жыл бұрын
Just because power stop said anyway can did it don't actually mean Anyone Can Do It
@polinorino23742 ай бұрын
Lol I did the same c❌❌❌
@Sitchy775 ай бұрын
Lol thanks😂😂
@kurtfoster28611 ай бұрын
Your rotors are on wrong slashes face foward
@septsixquatredeux Жыл бұрын
Omg thx 😂
@orlandodiaz12439 ай бұрын
You’re right!! I did it twice, l”m a bigger dummy, better yet a dam Jackass🦓 see what l mean😮