VGT TURBO PROBLEMS AND FAILURES 6.0 AND 6.4 POWERSTROKE

powerstrokehel...
Archoil: archoil.powers...
Short conversation about the problems most common with the VGT - Variable Geometry Turbocharger in the Ford PowerStroke Diesel application.

[@thinkfirst6431]

One thing that nobody mentions about these turbo's is that Ford stocks a nickel based high temp (2400F) anti seize formula for use in these turbos. If your truck doesn't move much or goes on short trips a lot it is important to paint them up to prevent the sticking problems. It also helps somewhat with the carbon buildup.

[@powerstrokehelp]

Glad to help. I get alot of business through my shop from the awareness raised by these vids.

[@davejalenderki]

I always wondered how the VGT worked and how it failed. Very well presented and interesting. Thank you for taking the tme to make as well as share the video.

[@bobuncle8704]

This is an awesome video. Next time I get stopped for street racing, I can show this video to explain that this is just the best practices to keep my turbo working efficiently.

[@powerstrokehelp]

@rquarantine The Ford Gold coolant is just fine if you flush and fill every 30,000 miles. If you want to go further the installation of the coolant filter and ELC will help protect your coolant system.

[@raptorian2208]

mr. bill you have helped me with my 7.3 2002 in so many times and ways that i dont know how to thank you enough you are the best in fords and a very good person god bless you!

[@MongoBaker]

I'm a gearhead so I fully understand what you mean about diagnosing something sight unseen. I'll inspect the pan plug and see if I can find any obvious cracking of the flexplate. It just seemed somehow turbo related to me since the sound seems to be coming from under the hood, is rpm affected, and is effecting performance somewhat (acceleration is not quite up to par). Thank you so much for your help. I've already learned much about these diesels from watching your vids.

[@nukkles11]

I Absolutely love your videos and think it is one of the coolest things i have seen. I think it is awesome that you take the time to share your knowledge and experience with us so that we may avoid the mistakes so many people before us have made. I cant imagine how much money and possible financial ruin you have saved people from. Everyone i know or learn of that has one of these trucks i tell them about your web site. That being said i salute you my friend and thank you again! Brett from Utah

[@powerstrokehelp]

@BuhlzI I have not seen a VGT conversion for the 7.3 ... yet. Yes DPF regeneration will contaminate the oil with fuel. If left unchanged will kill the main and rod bearings. I have seen it about 25 times now. I am convinced that the lack of lube from fuel contamination is what makes the rocker arms fail also.

[@michaelovitch]

Bmw Saab and recently volvo have this set up with two different turbos : one working after the other. It's called "étagé" here . it would be translated as "layered" or biturbo wich do not give the size distinction between the two however. Interesting video as always !

[@r0unders1]

Building a 1969 F600 into a car hauler. Im coming to see you for a motor and trans - probably a 6.0 retrofit as if it was a F350. Im convinced youre the one and I figure a change of pace build will help with the monotony. Im hoping to find a wreck with all the parts I need and just get you guys to rebuild it and add all the good stuff. See you hopefully before summer is gone.

[@davidhurtado113]

Nice breakdown my brother 👍👍. We need more guys like you in this world 😉

[@PaulJersey]

Now I own a 1991 300ZX turbo and it is on it's third set of turbos in it's 100,000 mile lifetime, admittedly it's been run hard. I have learned my lesson with turbos. What you want to do with any turbocharged motor is let it idle up a little before you drive it, and idle down a little before you shut it off to let the oil get in and out of the turbos. You need to keep the oil level full also. If the vehicle is down a 1/2 quart, don't wait until your next oil change, put the 1/2 quart in it!

[@MisterMattyMo]

Man you are a true professional! Love all your videos!

[@powerstrokehelp]

Most days i enjoy it but some days the adventure is gone its hard work.

[@robklarstone4788]

95k 2006 2WD F350 crew cab here. Bought this unit used 3 years ago. Pull a 281/2 Ft RV TT bumper pull with a 6,500lb wet weight - not too bad. Since I've had it, it's always had a slow lag, slow spin up feel off the line. Then bam! It'll get up to ramming speed in a hurry. I'm okay with that, but lately this last year (2017), as I'm towing on grades (3 -6%), the turbo shuts down and gives me either a CEL or the wrench/tool icon. Nothing ever overheats as far as I can determine. Each time during these climbs, as you know, I'm screwed, glued and tattooed - no power, inching over the climb at 35-40mph until I finish the climb. Once I can pull over after the climb, I'll do the usual code reading and end up with that P0299 code. I can sit for a few minutes, start back up, the warning lights all go away, and I've got my boost back again until I hit another climb - then the whole thing starts over again. With the travel trailer off, or at home again, I can run around town, down the freeway, drive like I'm in a drag race, and never ever see those dash lights again until the next time I tow. What up? Turbo? I don't hear any weird noises, no black smoke, nothing seems wrong until I tow up a hill. Time for a gas job? This is my second diesel... my 1st being a 7.3.

[@garydavid9705]

My truck does the same thing when towing, and sets the p0299 code if I take off before the turbo spools up when it's cold-vgt sticking. I was told the turbos are worn out at about 100000 miles. I might take mine off and pull it apart and inspect it.

[@BenjaminHansen]

What did you end up doing to fix the problem? Clean the turbo?

[@powerstrokehelp]

@bigtim9119 I like the Ford PowerStroke because of the way it drives and handles loads. A properly running PowerStroke is the best truck on the road. As far as used I have seen 7.3 junk as well as 6.4 junk. It all has to do with how the previous owner treated and took care of the vehicle. The 2011-2012 is the nicest smoothest truck I have ever driven but it is also 60 grand. For the money the 99-03 is the best bargain, the miles are irrelevant. Cheaper and easier to fix and run.

[@powerstrokehelp]

A clogged air filter will create a vacuum in the intake that will pull oil through the CCV. This can cause this problem.

[@cootarrieta1374]

Hello I know this old. But will a bad. Air filter pull P0046 code? And would the turbo be sucking oil and burning out the back?

[@powerstrokehelp]

it may be a dirty turbo but more than likely it needs to be tuned. I have inhouse 6.0 tuning for both the FICM and PCM that will more than likely fix the problem.

[@jeffreylonigro1382]

Interesting way around the problem of low rpm boost threshold and max power: usually mutually exclusive parameters. But not at a high cost: correct me if I’m wrong, but if a vane breaks or the actuator ring breaks you are looking at catastrophic engine failure. Love my 12v 96 Cummins!

[@powerstrokehelp]

That is misinformation. A good running 6.0 will run circles around a 7.3. AND a well tuned 6.4 will run circles around a 6.0.

[@regal105]

powerstrokehelp will a 6.0 vgt turbo actuate with oil pressure alone? Or does it need to be plugged in?

[@itisTaun]

Ha! Not my 6.4 !

[@dannyboy7299]

Oh really, but what about that 6.4 meltdown video of a few years back😂

[@JohnSmith-ok9sn]

Thank you for a great educational video, sir.

[@PepegaPig]

VAG has something called a VNT which is the same technology (in terms of the variability) which suffers the same problem. Unfortunately it's a common problem, but as long as you give your car regular oil changes, and get EGT temperatures up to a high level (high loads, high revs) - Most people unfortunately just drive like grannies and they get gunked up. Another good video, really like your explanations of things even though I'm not interested in these types of engines :) Keep it up!

[@buddha65281]

Can you ease explain the 15% and 85% that we see on diagnostic or sct2 units? My turbo is flipping from 85 to 15 percent and now it is staying around 15 and I have no boost. Is 15% a reference to 15% closed or open(vanes), i am just trying to understand this operation. Thank you for such a detailed video, love your work.

[@powerstrokehelp]

Yep, Id snatch that turbo off of there and take a hard look at it. At the very least remove the air intake tube and see how much end play is in the turbo shaft bearing.

[@powerstrokehelp]

I'd have to see it to be sure but it is common for the boot right at the turbo to tear. I'd check there first.

[@sycoticshelton]

Love this video! I believe I will have to come see you guys soon because my 6.0 sure doesn't have much punch off the line.

[@powerstrokehelp]

You will need to remove the turbo and clean the VGT vanes.

[@powerstrokehelp]

@SC45091 4" is more than enough. Expect to lose some fuel economy. The 6.0 likes a little back pressure. BUT your turbo will be cooler in towing situation.

[@chriskennedy4462]

Nice points shared on VGT Turbo problems and Failures.

[@powerstrokehelp]

Id really need to see it.

[@powerstrokehelp]

you need to drop the transmission pan and see if there is a bunch of metal on the magnet. It sounds like a torque converter going bad. Possibly could be a bad flex plate.

[@DTCigarFather]

I was learn watching your videos ..keep them coming and Thanks!

[@AllThingsRamdom]

I just had a major turbo failure. The impellers on the exhaust side and the intake side both seized. On top of this the fins for the veins the shafts that hold them in on 4 of them sheared off so the blades were sitting down in there not even attached. I have no idea how that happened. I had a guy following close behind me so I punched on the gas to get some space between us and when I did so I heard a pop sound and started to lose a bunch of power. Along with this a bunch of white smoke was coming out my exhaust which told me my turbo just went. With loss of powerand white exhaust that told me the turbo went out because the air to fuel ratio isn't right which would mean there's not enough air in the combustion chamber to burn all the fuel being put in which would put lots of white smoke out the exhaust. Got it home took the turbo off and that's what I found. I just hope small metal particles didn't get sucked up into the engine. I didn't see any small metal particles in the turbo anywhere and it looks like the shaft sheared off clean.

[@powerstrokehelp]

I'd really have to see it. Are you sure it is not pressurizing the cooling system and pushing past the coolant cap? Teakettling is unofficial term.

[@powerstrokehelp]

You are asking the wrong guy. I dont have time for this sort of silliness. If you can actually get the Turbo to physically mount with no exhaust leaks AND have some sort of screwy wiring to the TPS. What Tuning do you run? Nobody has written tunes for a VGT on a old 7.3L with VERY VERY slow cpu. The fact is that you will probably never get enough fuel at low end to feed the boost of a 6.0L VGT turbo. It would take 100s of tuning hours to get to run right.

[@powerstrokehelp]

@SC45091 The stock cat and muffler makes just enough to maximize economy.

[@chevyvanman1]

I have a 07 f350 with 110,000 miles in the process of changing dummy plugs & stand pipes found oil puddled in air chargeing side of turbo hoses going to air cooler covered & intake covered inside all caked with oil turbo vains have a black shine & unit has small side to side shaft play. Is oil passing shaft & bearings inside turbo or do i need to look in another location for oil getting into system the crank case breather tube from ds valve cover has some oil but not as much as rest of turbo?

[@powerstrokehelp]

It's hard to say without looking at it, but it sounds like it possibly could be the IPR valve going bad.

[@Mayo07J]

I found the 6.0 to be EXTREMELY laggy off the line. So much that the term "Cowboy Kick" was coined for the way the boost came on. I would show people how laggy it was by flooring it and waiting for the boost. Most people were astonished. "punch off the line" is the last phrase I would use for a 6.0.

[@aaronbradley4361]

Sound like you had a stuck turbo that only had boost at its highest rpm. That's not how it should work

[@Mayo07J]

The 6.0 was known far and wide for its turbo lag.From day 1, and from the day it got a new turbo, it operated that way.

[@Cocokingable1]

Thats because when you go from idle to 100% throttle, youre pouring more fuel than the air at that point. If you brake and spool just 3lbs of boost then mash it, i guarentee youll quit your bitching.

[@Mayo07J]

Brake boosting is just reducing the lag that is inherent in the truck. You're not going to brake boost at every stop.

[@jakhorse9910]

Mayo07J 🤔

[@Davidwhat]

closing off the exhaust to protect it from humidity will work against you... same as if you seal a vented head lamp, it will cause it to sweat internally as temps change daily... because there is already air in there with water in it that will show it self as temps drop... colder air is capable of holding less water.

[@powerstrokehelp]

I have not seen one yet.

[@powerstrokehelp]

Our tuning is head gasket friendly.

[@chevyvanman1]

air filter looks clean & indicater only got a little yellow showing got a rebuild kit for turbo back side of air charge fan looks to have oil spun out & caked on the back of it but it can be wiped off with a finger changed stc fitting, dummy plugs & stand pipes all updated parts from ford, oil cooler & egr cooler OEM Dorman not looking to mod the hell out of truck just want it to start every time got a lot tied up in it have only had it a year & in last 6 months have put almost 5k in repairs

[@cootarrieta1374]

Did you ever fox your issue??

[@clayandsusangibson9103]

Thank you for the excellent information on the Ford F350. We own a 08 F350 6.4 with 260K that recently made a brief noise that sounded like what I would imagine bearings being spun out. The truck then began blowing large amounts of black smoke out the exhaust on acceleration and under load and the mileage has dropped from 19.8 to 16.6 over a two week period of time. The truck drives OK although the power level does feel diminished somewhat. The DTC is throwing the following codes P2263 (Turbo charger/supercharger system performance) and P0703 (Torque converter /brake switch b circuit). I'm assuming (based on the noise I heard and this p2273 DTC) that this means I most likely need a new turbo charger installed. Would you agree and could you advise me on what a fair range of cost for this repair might be ?

[@Countryjim3522]

Great videos. Keep them coming.

[@EpicCowlick]

Great work and great explanation. Love your videos. Are you working on any 6.7Ls yet? Are you seeing HPFP or cracking valves? Some of the forums have a lot of noise on these topics but I'm not hearing anything from people who actually work on these trucks. Thanks.

[@dalton1583]

Another awesome video. Nice job

[@nukkles11]

Bill, at what RPM should you start building boost off the line? I dont start getting boost until around 1500 to 1700 RPM and its very slow out of the gate, but once it does build boost its like a rocket. It seems better if i ease into the throttle but i was just wondering if this is normal? I know one thing is for sure im a little punchy pulling out in to traffic. Thanks in advance

[@KAPtv]

Thank you for the facts sir.

[@Backwardsboi24]

Can you set a VGT turbo up into a 7.3 powerstroke?

[@MikeRthe1]

why dont they add a roller bearing to the ring actuator and call it a cigrit?

[@DpOaks]

can a worn out unison ring cause the turbo to surge under moderate acceleration?

[@Mebob2001]

i could so easly work 10-12 hours a day at this shop, i love turning wrench's, hate a messy work place, and like things organized so it goes back togethor easy. God i would have alot fo fun working on thes diesels

[@mickejaguar]

Hi good video. I have and issue with my truck first motor oil light and running engine reduce speed I check was oil escapes from exhaust radiator hose...any 😢 help or clue

[@jdshumway]

Thanks for all the helpful videos Bill. Greatly appreciated. I was wondering how common it is for the VGT solenoid to go bad? My truck just threw a p0046 code. And I have like zero boost until I get around 3000rpm. Any advice would be very helpful. Thanks

[@drusr]

i have the same problem... cant figure it out...did you figure it out?

[@BigBlockOverland]

Is there ANY way to run a vgt on a 7.3?

[@chevyvanman1]

I don't see that posable i'm in NC. I rebuilt turbo with a kit from G-pop, changed stand & dummy plugs, stc fitting too still have a high press leak did get truck to start but died after 2 min run now I have no psi to icp. hope to have a former 6.0l certified tech comming this weekend to hlp

[@powerstrokehelp]

I cant diagnose a truck I have not seen. It is physically impossible. You ask my opinion and all I can give are possibilities. IF there is no metal in the pan then more than likely the transmission is ok internally. You may be dealing with a bad flywheel/flexplate which will require removal of the transmission. I really need to diagnose it in person to see.

[@gurney5]

Have you seen a 6.4l turbo leak from where the manual VGT come out of it? Is there a way to replace a seal, bushing, etc to fix it? Its not noticeably reducing my boost. Just makes a constant hissing noise.

[@MikeRthe1]

+Guy Gurney rebuild the sucker

[@tdrocker99]

Bill I have been thinking about buying a newer Powerstroke, but I don't want to go with a 6.0L I've heard so much bad stuff about it but I found a 2008 6.4L for about the same price that I can get a 6.0L I'm trying to do alittle research on the 6.4L before I spend 25-30 grand on a truck I know one man with the 6.4L & its in a F-450 only problem he has had with is was the Transmission in it but he went out and put a big ole Gooseneck on it during the break in period Is the 6.4L worth the money

[@powerstrokehelp]

Is there any way you can bring it to me?

[@hossfarran6327]

How do you know if the seliniod gone bad? I noticed my truck turbo buzzes when I turn the key on and let the truck cycle before turning on then the buzz goes away. The initial buzz noise is random not all the time. No codes or lights on dash

[@TheWarachee]

Hey Bill, I drive a 07 F-550 with the 6.0all stock 120,000 miles. Is possible for the turbo not be turning or working and the engine still running (no power at all and lost of black smoke) because this just happen to me and I don't hear the turbo when the engine is running it's like if the turbo just shut down, won't rev at all, press the pedal and kinda works but then sounds like it just stop turning no boost at all . Thanks for your videos, they help a lot.

[@jaysuper8255]

And how much premium do people pay for the right to own a diesel like this? I would be afraid to buy a use 6.0 or 6.4 powerstroke. Great video.

[@stang1970]

we dont pay premium here in the states

[@steverivinius5686]

Just drive your toyota.smile and be happy.

[@airdogg1979]

it's a COMPOUND turbo system in the 6.4 not twin or dual or what have you...

[@MongoBaker]

My '05 Excursion 6.0 is making a rattling sound that resembles marbles shaking in a coffee can when operating around 2000 rpm. It's directly associated with placing more load on the engine when I get in the throttle. It seems to go away under heavy acceleration as the engine sweeps through its operating rpm range, but with every upshift that loads it back down to around 2000 rpm, the rattling comes back, and then goes away again as rpm's increase. Performance seems off a bit too. Is it my turbo?

[@powerstrokehelp]

Do you have the black CAC tube on the drivers side. You have to physically remove the tube to check for cracks.

[@leeh5183]

Forgot 2006 6.0 on pulling out like slug 10000 miles after rebuilt was running great now building boost faster than before and no turbo power if makes any sense

[@grafflin23]

Bill, I have an 03 6.0 that has been bulletproofed and then some. The one thing i dont have but really need is gauges. Anyways, here's my problem. Back in November i was climbing a long grade in Elko NV when all of a sudden i heard a noise that sounded like a high pressure air nozzle. All of my intercooler hoses are fine. I was even told that my intercooler itself was bad and after 900 dollars i found out that it was not. it sounds like it is coming from the turbo. any help would be appreciated

[@hanratty450]

can you make a vid on turbo bark

[@powerstrokehelp]

No not really. The software is better than the 6.4 and it will shut the regen process down if it gets close to meltdown.

[@herbertvonsauerkrautunterh2513]

Weitere good on 2L engines as well 👌

[@tonywyche4679]

I bought a 6.4 from a guy. I just realised that he deleted the dpf but he didnt tune it. Could that be one of the reasons why I am having turbo failures. Its telling me that when I diagnose my check engine light.

[@studbolt88]

I have a bucking and jerking 6.0 right now. It will buck and then won't go above 2000rpm or it will lurch or if I hold the pedal down lose power unless I drop it below 2000rpm. I had the ICP replaced but kind of lost right now on what else it could be. It starts good and blows no smoke when it does lurch or buck.

[@isaacwilliamson2607]

I can’t seem to find the problem with my 6.0 it’s been idling rough and I can drive it down the road and it’s not pushing any boost at all and sounds like a siren I thought my turbo went out I’m not sure!

[@fordpowerstroke2012]

Hey bill i was towing about 3000 pound trailer with my 2005 f350 6.0, now my truck ran good except for a few times. When it would reach overdrive it would kick in and the egt temps would jump from 1000 to 1200 and i would have no power in the peddle i had to ram the peddle to the ground to downshift to get going again. Also my turbo once in a while would all of a sudden jump from 10 psi to 25 psi and then back down again any ideas? its been bulletproofed.

[@powerstrokehelp]

@Backwardsboi24 I won't say it can't be done but i have not seen it done. If you can get it on there in a way that would work, the software to make the VGT work would be a challenge.

[@jorgeadame8202]

have a problem with a 6.7 Power stroke mod. 2011 was producing a lot of smoke from diesel to accelerate me under the code 2073 and 132B, you change the MAF sensor smoke decreased but not completely and I still dialing codes 2073 and 123B. some idea of the problem? Thank you.

[@seanemery3969]

Hey Powerstrokehelp.. I know this is an old video but I thought I was worth a try.. after spending thousands on injectors and other stuff I started digging in myself. My 06 F350 6.0 smokes on acceleration (when cold) and sometimes when cold there’s a bit of a haze on start up.. I noticed my EBPS is at 60psi at idle and a couple hundred WOT.. I got a new ebps and same thing... I even plugged it in while out of exhaust manifold and even then it reads 54psi... when I unplug the ebps the smoke goes away and it seems like the turbo is more powerful then too.. could you point me in the right direction ?

[@mcvisionproductionservices6638]

I have 2005 F550 6.0L. When I'm towing there are times it sounds like the engine begins to choke as if not getting enough air. The air filter is new. Could this be a problem with the turbo charger?

[@shawnlumley7079]

I've got a 2008 6.4 got a high pitch squeal while idling and acceleration was told it was a bad waste gate the noise does go away when waste gate is unplugged any ideas

[@richardmckibben2384]

Would internal mech wear out in the 6.4 dual wear to the point of no boost with only 160k on it I have no codes and I can move the actuator with my scan tool the exhaust back press sensor is clean no rat damage ? 2008 king ranch

[@rquarantine]

bill i know this is off track here but how do u feel about the cat elc coolant in the 6.0 i have heard a lot of people say that the premium gold coolant turns into gel and clogs stuff up ford replaced my egr cooler not to long ago and i want to make it last until i have enough dough to get my truck to u for bulletproofing.......thanks

[@powerstrokehelp]

@jacobwelsh911 Sorry we are a Ford only shop.

[@soapbox94]

thanks for the video. great information.

[@zollieh]

Private Pyle is that you?

[@fordpowerstroke2012]

Ya i get that, do you think maybe it could just be the tune on the truck i dunno if its stock or not i have to strategy codes for it but dont know if its a stock tune or not. It was running at about 1800 rpm in O/D could that contribute to it? i hear ppl saying it should be at around 2000 rpm so that you have all the torque.

[@jeffauto5278]

i have a 08 f250 6.4L diesel that leaks either deisel fues or some other fluid, dont feel any loss of power engine sounds fine, runs fine as well...just new at this diesel system, can you help out some i wuld really appreciate it

[@billydavis3320]

check your inter cooler boots,,,, part #26217 and 26218 oreily parts

[@nukkles11]

Will the tunes work with an un modified truck? My truck is bone stock with the exception of Edge insight gauges and a 4" banks exhaust. I do have the SCT tuner and tried the canned tunes that come with it but i was afraid of blowing a head gasket or damaging the transmission so i put it back to stock. Thanks in advance

[@CollinSmithRealEstate]

Would anyone happen to know if a faulty plunger would have a negative impact upon reassembly? The actuator rod from the oil plunger makes a gargling noise and is difficult to move back and forth when i rotate the unison ring. Is it normally pretty hesitant to move, or is the plunger not operating as it should?

[@lowen903]

Im in the process of rebuilding my 6.4 turbos and after reassembly they both have play in the shafts now. Was wondering if you have rebuilt any yourself or not and ran into this problem

[@fast227]

hey bill,considering either the 6.4 or 6.7. what needs to be done to the 6.4 in order to "bulletproof" it and if I was to do this, what is the best way to ship it from Canada to your shop thanks

[@davidwood2864]

Have a ? 6.0 p0299 not making boost doesn’t sound like a jet no more. Any fixes or bad turbo

[@jacobwelsh911]

Do you ever do anything with cummins or duramax? just wondering

[@matthewdye5176]

On my 2004 6.0, when u first start it, and then take off, most of the time, the turbo doesn't engage for a few seconds. Any suggestions to why?

[@rustyshackleford793]

Would you guys install a non vgt kit and a Borg s366 on a 6.0 while getting bulletproofed or do you not believe in that type of thing

[@dewanehill1232]

My 2004 F350 experienced a minor accident. Trailer Jackknifed moving the after market exhaust severely. The truck continued to run, but the engine vibrated and lacked power. After a few days of driving rough, it sat over the weekend. Then it tried to crank, but made a grinding noise and then wouldn't start at all. I suspect i damaged the turbo. I'm curious if you think additional damage occured by driving it for a few days after the accident. If so, I'm going to smack my mechanic friend with a wet kielbasa for Fing up my truck. Its at the dealer now waiting patiently in the cue. I'm terrified.

[@krystlpistol4697]

What was the issue?

[@intersy]

Hi there I own a 6.0 f350 2006 and I found these dtc displayed in my bully dog: P0281: cylinder 7 contribution/balance P0404 exhaust gas recirculation control circuit range/ performance P0487 exhaust gas recirculation throttle position circuit P1000 OBD-II Monitor Testing Incomplet 3 days ago It was really hard for my truck to tow my trailer on my way home after finished work. Also it throwing this dense black smoke out the exhaust. Could you give me an idea of what is going on? Thanks. Victor

[@westpay]

Canada's Best Roofers