PPD 3" Exhaust- ZD30 D22 Navara

Timestamps:
Startup with exhaust out of downpipe - @6:38
Idle and Revs - @9:34
Acceleration/Cruising - @9:51
Exhaust- ppdperformance...
Remap- baet.com.au/shop/
If you enjoyed the video, you might as well give it a like and subscribe, it goes a long way.
Cheers, Anthony
Follow me on Instagram: / anthony_james_catania

[@Jmskione]

Great work young man! Really enjoying your content 👌

[@stephenmyers4319]

Took my mate about 4 months to get his exhaust from ppd as well for his holden rodeo, no mountun issues but i had heard ppd was no good so i opted to go with a cheaper one for my n-trek navara which i orderd off the net and had no dramas

[@mattbaker6975]

Yer I had a shitload of issues with my ppd exhaust on my patrol.. the exhaust is great sounds awesome but I've broken the mounts literally 8 times and half of them wouldn't line up with out modifications

[@anthony-garienneblochowiak859]

G'day mate, firstly I just wanted to say I've been enjoying watching your videos (I bought myself a D22 about 6 months ago)- secondly, I see around 9 months has passed since you uploaded this video; I was wondering if you could could tell me how you found the tune in regards to fuel economy? Cheers.

[@connorsing4347]

Love the content mate! Ive owned a D22 zd30 2003 for about 5 years now and I love it! Just wondering what year your nav is and how you find the remap? Any problems caused by it? Cheers

[@manowar04]

excelente video, nuevo sub!

[@danieljasontedjasendjaja9458]

Bruh i thought you looked familiar, you went to my high school haha. Up the nav

[@gazrik]

Just a point of interest , with the exhaust kit , you mention alot of things not lining up . Could this be a difference of a Spanish built and a Thai built ? I know some things don't line up 100% of the time with other fitment applications

[@anthonyjamescatania]

Pretty sure the earlier d22’s like mine were built in Japan so not too sure.

[@jakecampbell8054]

is the installation part the same for a 2.5L?

[@anthonyjamescatania]

Honestly have no idea man but surely someone with a 2.5 has made a video on it

[@jakecampbell8054]

@@anthonyjamescatania yeah been looking around but can’t seem to find any. Keep up the great content!

[@topnotchactivity9325]

maybe a stupid question... but would it be possible to just cut the studs back so that you dont need to remove the turbo? since they dont need to be that long anyway.

[@cyclemoto8744]

4 months for PPD to deliver the exhaust!!! Thanks for letting us know. Will be sure to never buy anything from PPD.

[@fallfadedmitch929]

He mentioned it in the intro

[@rocknral]

​@@fallfadedmitch929 No kidding.

[@robcut91]

Hey bud, I am currently fitting my redback system on the 22 yd25 as we speak. There's 2 threaded holes in the rear side of the centre bearing x-member that your extra bracket should bolt to, to mount that middle hanger bracket there. I scratched my head at that all morning trying to work that one out lol.

[@kaius_say1943]

I have the exact same car, do you have any advice for me as I am also planning to get 3inch exhaust and 2 inch 50mm lift kit but I cannot find it easily so please give me some advices. Many thanks ✌️

[@kaius_say1943]

@@anthonyjamescatania thank you so much 😊 I will try to search up more about it

[@JBsManCave]

Not bad at all.

[@prestonberg7866]

What air filter are you running I just brought a hi flow from k&n part number e-2020 is that what your running or something different

[@kevinlay1797]

Hi Anthony, do you have any tips on how to remove the 3 bolts just below the cat? The 2 that are high up are near impossible to get to

[@chrishall9447]

Hi how are you i am from south africa i drive a Nissan np300 hardbody 2.5 diesel i also want to do a exhaust on it do i need to do the down pip

[@prestonberg7866]

I have a d22 aswell, how did you find having to take the turbo off to get the old exhaust off

[@jakecampbell8054]

did you prime the turbo before removing it or literally just unbolt everything and then take it out?

[@anthonyjamescatania]

Just unbolted and took it out

[@Made187x]

@@anthonyjamescataniadid you prime the turbo when you put it back on or just put it on and turned the Ute on thanks

[@ColinClarkemedia]

Hey mate, i have the same ute, zd30di navara, how is that "remapped" ecu going? Is it worth it? any issues yet? did it help 5th gear highway driving uphill?

[@vvaprr]

definitely do it, made a huge difference with hills and overtaking.

[@Ben-jp6kw]

hey mate, how did you remap it? i talked to some guys that said they couldn’t do a zd30

[@jakecampbell8054]

me again, do you reckon it would be much louder or annoyingly loud if i get a high flow cat and no resonator compared to what you did (no cat and a resonator)? cheers for the help

[@anthonyjamescatania]

Honestly not too sure I would say it would be louder though

[@h2336]

Hey mate, how has the exhaust held up after almost a year? Any rust or welds going bad? Tossing this up between playtime and PPD

[@h2336]

@@anthonyjamescatania nice one mate, in that video did you have the cat and the resonator version? So no muffler?

[@lochiebrett765]

After you put in the remapped ecu was there a big difference in the fuel economy

[@lochiebrett765]

@@anthonyjamescatania how much more power did you get with the tune

[@rubenmojica7607]

Hello friend, greetings from Panama, what type of high flow engine air filter can I use on my nissan d22 with a QD32 engine?

[@anthonycurry6764]

Not too sure mate as I had the zd30 engine. If you type that into google something should come up

[@isaiahheise6111]

What turbo did u put in it??

[@guillermolicon2253]

Hey mate have your nav ever went to a limo mode ??? If so can throw me some hint to look for

[@anthonyjamescatania]

Honestly never did so I couldn’t tell you. Maybe have a search of the Facebook forums

[@funsimulator7246]

Is the bottom bolt on the turbo manifold to turbo flange easy to undo? I'm about to tackle the same job on my zd30 tomorrow, at a glance it looked like it might give me some trouble. Already had to grind a bolt off the heat shield to remove it so it's not looking promising so far.

[@anthonyjamescatania]

Honestly did this a long time ago but most of the bolts were a pain haha

[@funsimulator7246]

@@anthonyjamescatania yeah fair enough. I've been dreading this job for a while. Out to the shed I go!

[@kevinlay1797]

Hi mate, did you leave the boost standard for the re-mapped ECU?

[@kevinlay1797]

@@anthonyjamescatania thanks for the reply. So did the re-mapped ecu up the boost itself?

[@kevinlay1797]

@@anthonyjamescatania cheers mate. I’m gonna get me one down the track

[@jackbarns1627]

Does it soot while driving

[@anthonyjamescatania]

Tune was pretty clean so I doubt it

[@videomaker8207]

Take out the sway bars bruz it’ll be fully sick(and yes Im on the piss)

[@btadventures_]

Do U have to take turbo out?

[@btadventures_]

@@anthonyjamescatania cheers mate, I've just got mine and I'm keen to put her in!

[@EnkeiTenjin]

And this is why you don't cheap out and get something that is compliant or close to, and actually bloody fits without issue. Buy once, cry once.

[@tatesmith2322]

Hey mate stock turbo??

[@tatesmith2322]

@@anthonyjamescatania sounds gnarly with that pipe

[@Luminati-]

Hey mate how did you find the ppd exhaust? Rate it?

[@Luminati-]

@@anthonyjamescatania would you do it again? The price really intrigues me haha

[@Luminati-]

@@anthonyjamescatania did you end up getting the exhaust hangers/mounts modded to fit? thanks for the reply man Keep up the good work with the r31 and the d22, you’ve earned my sub

[@jakequinlan8868]

Hey man, is it possible for me to run 2 inch shocks in the front end of my zd30 nav to help level it? my rear sits too high due to having next to no weight and it basically just looks like shit. Just wondering if I can run them with stock upper control arms, no diff drop, no extended brake lines etc. Cheers, Love the channel by the way.

[@jakequinlan8868]

@@anthonyjamescatania It doesn’t sit ridiculously high in the rear.. like I definitely have standard leafs, I just have no weight so it sits a little higher than the front and if anything I like the look of the front sitting higher and didn’t wanna raise the rear if I didn’t have to. Thanks anyways man, I’ll look into raising the torsion bar to level it.

[@rocknral]

Just Jack it up and wind the torsion bars up.

[@purescarzx7848]

How did you get it to go Choo lol ( dose sound )

[@purescarzx7848]

Would the hi flow air filter and remapped ecu have something to do with it also?

[@purescarzx7848]

@@anthonyjamescatania ahh alright then thanks for the reply mate, love your vids

[@tomlogothetis9901]

I didn't have to take turbo off it wasn't thst hard take dump pipe off although you need kinda small fingers 🤣🤣🤣