PPP Authentication - Video By Sikandar Shaik || Dual CCIE (RS/SP) # 35012

[@anbuvicky4503]

I think for CHAP protocol figure is wrong. 1)After the completion of the link establishment phase, the authenticator(LOCAL HOST) sends a "challenge" message to the peer. 2)The peer(REMOTE HOST) responds with a value calculated using a one-way hash function on the challenge and the secret combined. 3)The authenticator checks the response against its own calculation of the expected hash value. If the values match, the authenticator acknowledges the authentication; otherwise it should terminate the connection. 4)At random intervals the authenticator sends a new challenge to the peer and repeats steps 1 through 3. REFERENCE : wikipedia

[@itsrohan5650]

hello sir can you provide the slides that you are using ?

[@sandeepsharma-ds8xc]

sir ye pen konsa h

[@nightrider0203]

Thanks for making it simple and easy to understand... :)

[@navinnatarajan760]

Can we use ppp if we are connecting 3 or more routers?

[@akaris8042]

Thank you for sharing your knowledge

[@narendrareddy2791]

Hi sir May I know any specific interval of time to generate hash value for local router

[@copycat6414]

If we use three or more number of routers.. how to do CHAP or Encapsulation

[@sayyapureddichinnaappannad2266]

for every interface we need to write configuration

[@mdmoin7168]

Some information about hash value after destination sending challenge value by md5

[@PDM985]

How to add serial port on router

[@MahendraPatil-rw3fe]

Thanks sir for your previous time.

[@aishu4725]

thank you sir

[@helpdeskreliance4578]

Great

[@harishbs3803]

Thank you

[@sandeepsharma-ds8xc]

esko share kro agar free h to