Should I BUY This Shop? | Machine Shop Talk Ep. 84

  Рет қаралды 5,582

Practical Machinist

Practical Machinist

Жыл бұрын

Have you ever considered buying the shop you work at? What if the owner was retiring, and offered to let you buy into the shop over time?
In this episode of MACHINE SHOP TALK, Ian Sandusky from Lakewood Machine is diving back into the Practical Machinist forums to tackle this scenario as posted by a poster looking for some advice.
As with any business, there are some major considerations to be made when looking to buy a machine shop. From annual revenues to valuations to real estate, to staffing - there are many factors that can make a deal in this field fantastic - or a potential nightmare. We’ll be covering some of the most important things to look out for when making the decision to become your own boss.
What are the most important things YOU think someone should look out for in this situation? Let us know in the comments below!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Practical Machinist is the largest and most engaged #metalworking community across the web. With more than 160,000 registered members and 400,000+ social media followers, Practical Machinist is the easiest way to learn new techniques, get answers quickly, and discuss common challenges with your peers. Visit Practical Machinist today to join the community and start connecting with your peers.
Become a Practical Machinist member (www.practicalmachinist.com/)
Like us on Facebook ( / practicalmachinist )
Follow us on Instagram ( / practicalmachinist )
Follow us on Twitter ( / prac_machinist )
Follow us on TikTok ( / practicalmachinist )
Connect with us on LinkedIn ( / practical-machinist )
Connect with Ian Sandusky on LinkedIn ( / ian-sandusky-3a223227 ) or learn more about Lakewood Machine and Tool at
lakewoodmachine.com/
sales@lakewoodmachine.com
(905) 853-6194
Instagram: / ollow Ian
Lakewood Machine (lakewoodmachine.com/)
#metalworking #machining #machineshop

Пікірлер: 30
@jimc4731
@jimc4731 11 ай бұрын
My first answer is no Work at the Co until the end If someone else buys it you will most likely have the job you like If the business is closed, go to the auction and by, piecemeal the equipment you want for pennies on the dollar JIM
@michaelg3911
@michaelg3911 Жыл бұрын
Shark Tank for machine shop owners. I think we would all like to get the shop owner to present this "great opportunity "for us to buy into the business and explain why he thinks it is worth the asking price. So many questions...
@iansandusky417
@iansandusky417 Жыл бұрын
Man I would 10000% watch that!
@SwarfcastPodcast
@SwarfcastPodcast 4 ай бұрын
Your distinction between "buying a job" vs "buying a business" is what it's all about. Very astute. Good video. I mean to watch KZbin more but I never seem to get around to it. Good stuff.
@5axmachine167
@5axmachine167 11 ай бұрын
If you enjoy being a machinist but despise being a businessman, be ready to change your mindset. I own my shop now, but stayed in front of a machine far too long until the light came on. I wasted some of my best years thinking I could run a machine and a business at the same time.
@Vankel83
@Vankel83 10 ай бұрын
I kick myself from time to time. I could and should've pull the trigger 2-3 years earlier on opening my shop. 18 years later still glad I did open it up.
@joepublic6256
@joepublic6256 8 ай бұрын
Bro this exactly whats happening to me. Like exactly. Researching sba loans now but debating ownership. Im the right hand guy for 23 years. Owner doesnt touch machines at all. I do 100%
@user-pp8ly2wn6t
@user-pp8ly2wn6t 8 ай бұрын
Great video thanks for the great information and well delivered. This is exactly what I was looking for.
@clarkmaq
@clarkmaq Жыл бұрын
Great Ian as always, good to hear from you , full of wisdom. Huge machining experience.
@iansandusky417
@iansandusky417 Жыл бұрын
Thank you very much for checking it out!
@jeffmushell8329
@jeffmushell8329 Жыл бұрын
Until later in the post summation, I could’ve SWORE my other half hacked my account and posted about MY situation🤣🤣🤣my advice based on where I’m at in this process, get an outside account to look at the books and try to compromise on a number. It may come down to a 3rd party business appraisal, but according to my lawyer, it’s usually not necessary. I’ll have to dig through the forum and find this post!
@iansandusky417
@iansandusky417 Жыл бұрын
That’s fantastic advice! Third-party appraisals are nice because they take the ‘personal’ feelings out of it and drill down to the actual numbers you’re dealing with. Best of luck in your acquisition!
@TheMadHatter626
@TheMadHatter626 Жыл бұрын
I guess in this scenario I'd look for equipment and tools I'd be interested in and offered to buy those and just work out of the home shop when the businesses shut downs tell a new opportunity comes along.
@iansandusky417
@iansandusky417 Жыл бұрын
That was very much my thought as well - no sense in burning a ton of capital for the package deal if it’s not really necessary!
@lukegkohler
@lukegkohler Жыл бұрын
Totally agree with the summary. The OP could buy a couple really nice used machines for $50k and get in for a lot less
@iansandusky417
@iansandusky417 Жыл бұрын
The biggest thing I found was if he already has similar capacity at his home shop, it would likely be better just to keep his job at the shop until the owner was ready to close - then try to transition the existing customers to his own shop - it would certainly save a good bit of scratch!
@jdaz5462
@jdaz5462 Жыл бұрын
The most valuable assets of any company, are the customers. If you buy machines for $50k, you still have no customers.
@Flyingnobull
@Flyingnobull 8 ай бұрын
What does it mean to be responsible for the backend in a machine shop? What does backend entail?
@joepublic6256
@joepublic6256 8 ай бұрын
I get the mail for my employer and i see all the bills every day. Health insurance, CA regulatory forms and questionnaires, environmental fees, electric, phone, alarm, business insurance, worker comp insurance material bills you name it. Juggling that and payroll taxes, regular taxes and payroll(quickbooks) is i think what the back end is.
@jdaz5462
@jdaz5462 Жыл бұрын
I know you are trying your best not to clap :) Your early videos were unwatchable because of that. I'm loyal though!
@iansandusky417
@iansandusky417 Жыл бұрын
What advice would YOU give to someone looking to buy the shop they work at? What red flags would you watch out for?
@Maniacmachinist
@Maniacmachinist Жыл бұрын
Last week I closed the purchase on my employer, 10+ full time employees, Great diverse business. With that being said we have challenges just like any trade right now, top of that list is finding skilled employees. The biggest advice I can give someone looking at a shop is hire a hood accountant, hire a good lawyer, and really look yourself in the mirror and ask yourself if you want to do it, and if you do and the numbers make sense, then go after that dream!
@Whitehorze
@Whitehorze Жыл бұрын
Pass. In this case, there is nothing of any value in this business except the client list. With 2 clients and only 1 that is reliable, I'd take the $250k asking price and divide it by how much RELIABLE revenue the clients are bring in. That's your timetable. Now: What is your cost schedule going to be for the duration of the time you have? Building repairs aren't an issue but there is Rent, Utilities, What happens when the computer goes up in smoke in your machine? Will you be able to afford a replacement based SOLELY on the business income? For $250K can you setup a better shop with a lower cost schedule or a higher profit margin?
@joepublic6256
@joepublic6256 8 ай бұрын
Id say overvaluation is my concern. Boss had the shop for 45 years, last 3 have been trash after biden. Previously really lucrative. Machines completely lack any PM and im thinking 70k for and okuma 4020 mill, haas vf2ss ok, old sl20 bar pusher ok shape, and newer ST20 good shape. He hasnt gave me a number yet
@user-lu1lv2bf5f
@user-lu1lv2bf5f 2 ай бұрын
If the machinery is worth say $10K that means you are paying $250K - 10K = $240K for two customers. That's $120K per customer. You're buying customers. That's a lot of money to buy a customer.
@markhorner4982
@markhorner4982 Жыл бұрын
didn't watch it all got to point i thought don't buy it .
@iansandusky417
@iansandusky417 Жыл бұрын
That was my thought as well!
@joepublic6256
@joepublic6256 8 ай бұрын
Its exactly my situation. Buying into a failing shop but it has potential. But is it worth my blood sweat and tears? Im already 51 and my wife says no way
Customer Won't Follow Their Own Tolerance | Machine Shop Talk Ep. 83
18:13
Practical Machinist
Рет қаралды 10 М.
How to Build a CNC Machine Shop - Part 1 (Branding, Marketing & Finding a Niche)
19:11
World’s Largest Jello Pool
01:00
Mark Rober
Рет қаралды 110 МЛН
ЧУТЬ НЕ УТОНУЛ #shorts
00:27
Паша Осадчий
Рет қаралды 10 МЛН
IQ Level: 10000
00:10
Younes Zarou
Рет қаралды 11 МЛН
Liberty Machine, Inc. MACHINE SHOP TOUR!
30:06
NYC CNC
Рет қаралды 100 М.
Too Much Work for The Shop… How do I manage it? | Machine Shop Talk Ep. 77
17:56
You Don't Need to Break the Bank to Start a Machine Shop!
12:52
Practical Machinist
Рет қаралды 16 М.
How to Motivate Employees to do Good Work | Machine Shop Talk Ep. 71
19:36
Practical Machinist
Рет қаралды 8 М.
Watch Out for These Red Flags in Used CNC Machines! | Machine Shop Talk Ep. 92
14:36
How to Deal with Walk-In Customers? | Machine Shop Talk Ep. 2
12:24
Practical Machinist
Рет қаралды 18 М.
How Do We Train New Machinists Properly? | Machine Shop Talk Ep. 38
16:28
Practical Machinist
Рет қаралды 25 М.
Top 3 Things They Don't Teach You in Trade School | Machine Shop Talk Ep. 14
10:18
We Started Our CNC Machine Shop with $20,000 | Vol 16
56:52
TITANS of CNC MACHINING PODCAST
Рет қаралды 10 М.
8 Товаров с Алиэкспресс, о которых ты мог и не знать!
49:47
РасПаковка ДваПаковка
Рет қаралды 178 М.
Как удвоить напряжение? #электроника #умножитель
1:00
Hi Dev! – Электроника
Рет қаралды 1,1 МЛН
Проверил, как вам?
0:58
Коннор
Рет қаралды 363 М.
Лучший браузер!
0:27
Honey Montana
Рет қаралды 1,1 МЛН
Looks very comfortable. #leddisplay #ledscreen #ledwall #eagerled
0:19
LED Screen Factory-EagerLED
Рет қаралды 12 МЛН