Inside DMG MORI Giant Machine Tool Factory!

[@aris9560]

Congrats for the video! Amazing job! 6:30 The difference between a German factory guy vs. every other nation: A german guy NEVER breaks the rule of walking in non-safe zone on the factory floor. These lines on the floor have significance!

[@DuRöhre4711]

Regarding some comments: This is NOT "THE" DMG Mori Plant in Germany. This is the old Deckel Maho Plant in Pfronten, where some(!) of the DMG Mori Milling machines are made. E.g. the DMU50 is assembled by Deckel Maho Seebach, some lathes are assembled in Bielefeld, other Lathes are made in Italy at Graziano Tortona. Some machine beds are milled at Famot Pleszew. Afaik the city of Pfronten will not give any more land to Deckel Maho, so further expansion is off the table there.

[@jhilmer1]

And that’s just the German stuff. The Japanese machines are made in Japan and Davis, CA.

[@DerFlexy]

@@jhilmer1 and in Le Locle, Switzerland, old Dixi-Machines Factory. 😉

[@timhess3405]

Haha imagine having a facility like this in the old Deckel factory in the city center of munich!

[@martinhuang8100]

Good job. You understand the details of the DMG Mori. Thanks for your information.

[@donttellmywiferacing1789]

Yeah former DMG employee and current customer here: this is THE DMG plant, and I’ve been to all of them.

[@akshaybhawar842]

amazing people with amazing machines. also do they guys still use plc for automation

[@JigilJigil]

I was always interest to see someone do a tour of DMG Mori facility, thanks for the great video and man, what an amazing facility!.

[@jbwalker841]

I toured Deckel Maho Pfronten in October. Very impressive how they can move those monster machines through town. Our bus was almost rubbing shoulders with vehicles and buildings driving through town, those massive machines must be a real challenge. We came out of the factory and there were 4 or 5 people paragliding down from the peak of the mountain outside the factory. Very cool place.

[@JoeYT413]

Your video quality has improved so much from your early days. It’s very fun to watch.

[@PracticalMachinist]

Wow, thanks!

[@anoirbentanfous]

I am wondering what would be more impressive than this and what would impress men who build these factories?! Even how clean and organized everything is, makes me want to cry

[@Rionet2]

Thanks for video, the conveyor is incredble! Its a dream to see the casiting process, please do it if it possible

[@billboudsamad5318]

Wow... so impressive. Ultra highend machining for real. Thanks Ian for sharing.

[@OscarEsteveRosell]

En EBZ hay varias fresas de esta marca,,se ve que funcionan muy bien

[@davidsum8924]

i was in Pfronten factory 30 years ago. and now it looks compelety different. Great works.

[@TAH1712]

AMAZING FACTORY, not even a scratch on the floor! If you wanna do it right, take note...very Interesting tour. All very logical of course. A place for everything and everything in it's place!

[@brianmckenzie1739]

Haven't watched the full video as yet, but intrigued with the arrangement of overhead cranes at 0:43. Looks like the grey painted crane arms can traverse sideways (not swing), braced partly by the higher level rails for the full width portal cranes above.

[@marceloadrianrodriguez7202]

Soy Marcelo de Argentina,la verdad una hermosura estás fábrica,y obvio las máquinas terrible,soy programador y especialista en mecanizado,tanto torno y centros mecanizado, ojalá pudiera algún día poder programar un DMG Mori, gracias

[@Basement_CNC]

as a joung upcoming engineering student and cnc freak ( bought my first cnc at 17, and planning and building a 5 axis cnc at 18, and yes i made that money myself) they are definetly a DREAM employer and they speak german and are only 400km away from where i live 😮 literally perfect

[@iliketoast-q9b]

Impressive, but your flexing is cringe ngl. What do you use for CAM? I presume you're not working with simultaneous 5-axis-machining, right? Prices for true simultaneous 5-axis-CAM are astronomical unfortunately.

[@B-I-tr5qp]

it would be very interesting to see where the castings come from, how they are aged, how they are machined. the same for the linear guides...

[@Arthur-ue5vz]

Ian, this factory tour was ĵust simply stellar! Wow! Just wow! Nothing short of AMAZING! What incredible machines! I'm ĵust blown away! Keep em coming Ian!!!! 😊

[@iansandusky417]

Thank you very much for checking it out!

[@Arthur-ue5vz]

@@iansandusky417 🙂

[@الستور-رال]

I have a question can DMG MORI machines manufacture photolithography machine that is used in semiconductor industry

[@dtm8073]

WOW!!! That's all I can say, can't find any other words.

[@SA-HOME]

DMG Mori - the best 👌

[@mrrandom1871]

that was incredible machine,i'm just thinking how amazing the DMG MORI need other DMG MORI to create another DMG MORI

[@freefritten4194]

Good Video, next time you have to visit Trumpf in Ditzingen

[@vism_xyz]

DMG - It's just amazing!

[@BiscuitsandWar]

This factory is insane 🤯

[@Terminator550]

Thank you for the factory tour.

[@pirminkogleck4056]

Thanks! awesome tour !

[@kongwu8390]

very good interview style. but like someone said, I would like longer vedio,maybe like 1 hour, because it is so interesting

[@PracticalMachinist]

More to come!

[@Tuxedo2680]

Man those guys aren't banging rocks together there. That has got to be the most impressive manufacturing facility I've ever seen.

[@DMSparky]

Not a criticism but maybe a request maybe a little less camera movement on the next one. World class facility!

[@gavinsfriend456]

Request denied

[@alexanderdesfosses]

He just needs a gimble

[@The_Quaalude]

Yeah bro can't hold the camera still

[@sadboylokoenjoyer]

I worked there a couple of times for a different company, one of the nicest and kindest customers. Grüße ins schöne Allgäu 🤝🙌

[@yaroslav920]

love the watch ⌚

[@warriorwithin767]

No wonder if DMG produces orignal Jaegers from Pacific Rim & Iron Man suits 🔥🔥❤️

[@JackWilson327]

People and machines making the machines that make the chips that make the Internet (and all kinds of other stuff). I keep saying nothing really happens on this planet until someone cuts a piece of steel. Thanks. Awesome plant. Nice to be able to at least see it. Thanks for an orderly tour too.

[@hdxyhdhdhhdhdhehd6305]

Is this related to Mori Seiki?

[@iansandusky417]

Yes indeed, DMG Mori is the company founded by combining Deckel Maho and Mori Seiki

[@pucmahone3893]

@@iansandusky417 Deckel, Maho, Guildemeister and MORI SEIKI

[@TritonTv69420]

DMG makes the best machine tools hands down The Seimens 840d touch controller is the best cnc controller I have ever used.

[@TheBlaert]

A fantastic controller. We use them on our DST Ecospeed machines.

[@Boboped1]

Facinating!!

[@leonschumann2361]

how did you get a shop tour without any people around?

[@iansandusky417]

We got very, very fortunate and DMG Mori was very kind to accommodate us at the tail end of the work day / just after closing

[@pafsrh4744]

i need that

[@tuncakca]

incredible machines

[@savagemachinistalien348]

This is amazing

[@jimsvideos7201]

1000-pocket changer? Good gravy.

[@Alex_Fire777]

Nice to so clean macine shop👍

[@leoccc]

Where is this factory located?

[@PracticalMachinist]

This factory is in Pfronten, Germany

[@piranha32]

Every tour of a high-tech modern factory in Europe: giant windows, skylights, lots of natural light. Every tour of a high-tech factory in the US: dark, no windows, daylight reserved for management. Why?

[@dreieckrechteck2716]

​@3RPRECISIONMFG Hm. I do not think that you can scher them all über einen Kamm. (little mixed language joke, it was funny in my head. German speakers will get it) It means you can not lump all together. There are many employers in Germany who do not treat their employees well, and there are many employers in America who are not as evil as you describe. This is not a problem of a single country, but of the people. We Europeans like to tell ourselves that Americans talk a lot about freedom and then let themselves be enslaved. That is certainly the case, but not everywhere. Besides, it also exists in our country. Fortunately, I am not affected by it, because my employer actually behaves very fairly, but I know a lot of machinists who came from other companies and who did not fare so well there. I bet there are a lot of companies in America that are just so nice and treat their employees well. Of course, that's not to excuse those who fit that description exactly. I'm just saying that we're not free of this problem and we shouldn't think that it can only be bad elsewhere. Sorry for any mistakes, English is clearly not my first language. P.S.: Production is also a part of American culture. There's a lot to be proud of there, too. Except, of course, the measurement system.

[@dermozart80]

Robert Bosch, one of the most famous german engineers and entrepreneurs once said: I don't pay good salaries because I have so much money, but I have so much money because I pay good salaries. And that says a lot about german engineering culture.

[@khelgo]

Вот бы у нас в Узбекистане внедрить такую культуру Европейского производства, но к сожалению менталитет и многие факторы, тянут нас назад в прошлое...

[@juanmanuelgarciaortega8574]

@@dreieckrechteck2716 jajajajaa no se puede fabricar nada de calidad trabajando en pulgadas!!!!!!

[@dreieckrechteck2716]

@@juanmanuelgarciaortega8574 No me refería a eso. Por supuesto, también se pueden fabricar productos de alta calidad con la unidad de medida pulgada. Se puede hacer aunque se mida en campos de fútbol. Pero no es un buen sistema y lleva a confusión en todos los demás países que han acordado el sistema métrico.

[@maerec9303]

The best machine I've ever worked on was an dmc 125 duoblock

[@delsokolski7151]

Impressive

[@grupomecafoodsas3991]

a dream shopfloor

[@faisal8793]

High tech machine dmg Mori❤❤❤

[@tdg911]

Amazing... Looks like an F1 garage. Can almost eat off of the floors.

[@krp4473]

How much do these machines cost ? I wonder 😅😊

[@ignaciogarcia2148]

precision mechanical engineering

[@MrAarms91205]

Great Video.

[@DonariaRegia]

That is some cutting edge manufacturing on a bewildering scale! An idea for a future video might be a look back at the Elgin watch factory, the largest ever built, manufacturers of the smallest consumer machines. A lost 1931 film reel of the factory was uploaded with amazing facts and images of large scale precision machining. You won't believe your eyes at what once was.

[@arbjful]

That is amazing…

[@Jack_Rabbit71]

kzbin.info/www/bejne/r6SXdJuFjL6Br5o

[@elieli9911]

this is great

[@terrymatvichuk1421]

Amazing

[@LukeD40]

WOW

[@fabioth283]

Where is the giant machines?

[@walmickmcampos3933]

Essas máquinas são top! Magníficas, e sonho de consumo, para quem gosta de máquinas operatrizes e tecnologia.

[@sadboylokoenjoyer]

🇩🇪🇩🇪🇩🇪🇩🇪🇩🇪

[@KingElmo83]

Nice video 👌🏻

[@ShawnCantwellKnives]

Wow not a pallet chip in site.

[@jasonlanning2394]

I don't know how this guy gets access to these amazing places. He is a terrible interviewer, asks dumb questions, and makes even dumber comments, but I give him credit. He shows the most amazing machine shop footage I have ever seen.

[@iansandusky417]

At least you enjoy the footage - I ain’t going to be everyone’s cup of tea!

[@charlieguenther5490]

.0005" across 11ft! Is this real? I want to know how this is possible. I suppose if you can keep track of thermal effects, hysteresis and use a closed loop controller with excellent feedback technology anything is possible. I would love to see a demonstration of this capability!

[@emanuelesilvestri6646]

I quadri elettrici ?

[@L118aKev]

I Transport these huge machines across the US

[@piri_666]

Been there too, amazing factory for machines. German/japan machines are best.

[@TrPrecisionMachining]

DMG MORY is high level machines

[@shushruthmg4630]

Dmg mori made a big mistake showing all these, now I'm going make these myself

[@MrGossner]

100%, yeah, genau! :D

[@MrGossner]

3:22

[@adammiller4879]

Dmg mori is the highest of quality, our most accurate lathes are dmg mori

[@vlad_f6096]

KZbin gave me to watch CNC god mori after 10 different DIY CNC project guys, so now im at finish i think

[@tonyking9235]

ONE CAN SAY . THAT THAY CAN PUT THERE HAT ON AND GO HOME EARLY. WHAT A PLACE .

[@hamzayousufi797]

HAV or HEV what are those?

[@penguiburst]

crazy

[@abderahimaitoudhia9722]

We crashed the spindle in new sprint 65

[@CJBradley]

Trust me those are kind of small. I used to work with an Asquith CNC back in the nineties with four heads and a 10 x 5 meter table, we did very big work on that mostly one off's but it wasn't as sofisticated as todays machine tools. It was designed to machine nuclear waste flasks out of solid steel castings, forty ton of which would be waste material. I'm 70 and retired now and things have moved on a bit with multi axis machining.

[@GeneralThargor]

Fun drinking game, take a shot every time he says wow. Good luck!

[@bengherasim9286]

Good video shows the assembly of the machines shows the logistics center BUT dmg mori in these kinds of videos never shows the actual machine shop where the machines are actually made BEFORE assembly I mean if haas for example shows the world how the machines machine the raw castings how come dmg don't do the same cause more or less that's what people actually want to see... but nonetheless a nice video

[@user-dy6lq4cn2v]

It´s because the Video was filmed in Pfronten, wich is mostly an assembly location. They manufacture smaller components as for example Parts of the Table 9:27 and parts of the spindle Head 3:49 in House. Most of the bigger components are manufactured in Poland by the Famot location from DMGMORI. There are seperate Videos from this Location. kzbin.info/www/bejne/joK1dpSChtuorpI&ab_channel=DMGMORI

[@prathameshsagvekar526]

I really like to work in this factory if any chance to me work in this huge company?

[@chriswilkinson2548]

Think everything starts here. A milling machine

[@richardmiddleton7770]

No machining demo???

[@arbjful]

German technology is the best…👍👍

[@hansnoeldner1861]

Let's face it; Germans make the best machines ever!

[@FOXCRF450RIDER]

🤯

[@conejoyconejamillan3340]

👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽

[@OscarEsteveRosell]

Ole

[@id104335409]

Can I buy a machine that can reverse engineer and cut this whole factory?🤔

[@FuSiionCraft]

Two of the machines in my shop have small elevators on the back of them due to how tall they are ! I don't remember the brand, but even when the table is flush with the ground (because the machine itself is put half underground lmao) it's still 15m tall or something They are biiiiiiiig There's also 2 lathes that can take parts up to 16m lmao

[@Klibabin]

Nice factory, but Okuma's are higher end though.

[@AdFree-of7ge]

19.4.24

[@brabuslgsonymansorytesla813]

ASSALOM U ALAYKUM TASHKENT UZBEKISTAN SVARCHIK BRABUS MANSORIY

[@Porsche137.]

Почему не используют сож .why not use sozh

[@dirtboy896]

I didnt really get to look at the machines you were moving way too fast

[@dallasrieck7753]

a house not "your house"😉

[@iansandusky417]

Bigger than some places I’ve lived for sure 😂

[@bogdanmarkovic]

Amazing seeing this tour but watching this on tv i got a headache…too much camera movement, constant zooming in and out. Would be much more comfortable to have camera a bit away from you two talking and maybe zooming out as you come closer and maybe pan left or right on some machine along the way.😢

[@kimmoj2570]

12:34 Structural accuracy of mill is measured on continuously moving platform. Just like Kias moving in production line. Guy even said it was "tricky" to develope. No wonder DMG Mori current reputation of selling flashy LED decorated crap at premium prices. People at Hermle, Kern, Matsuura, Kitamura, Grob etc etc would had stroke if management suggested such thing. Pure, unvarnished greed. Current DMG Mori is exact repetition of Mercedes Benz in 1988-90. Out of blue an engineering excellence company was put in situation where engineers didnt have any say in company, only beancounters had.

[@kellymoses8566]

In response to the Russian invasion of Ukraine in 2022, DMG Mori claimed to have withdrawn from the Russian market,[25] however, in September 2023, the Russian opposition investigating reporting web-site Agency published an article claiming that the company is continuing its operations in the country.[26] After an internal investigation regarding ongoing production in the Russian facility, the company denied claims that products were delivered to military-related companies. The continued production proceedings were explained through existing binding contracts established prior to the market withdrawal, which still had to be fulfilled to avoid breach of contract claims.[27]

[@garyeuscher4499]

We bought one It malfunctioned for a year. They put a plug in wrong hole on chuck(C) axis Coolant dripped down into encoder. Not the German quality I anticipated

[@phily-ue6et]

Who stuck a badge on saying 5-axis champion?

[@peek2much3]

Bud, build == ensemble same thing

[@christiansmith-of7dt]

I feel like i was never good enough ,