Homemade Jet Engine, New NGV Building And First Start

[@drsamuelk]

Finally a home built jet engine that works with few glitches. Bravo

[@nikitashilo2130]

После сварки нужен термический отпуск. И только после термической обработки нужно делать мехобработку. Иначе внутренние напряжения при работе двигателя и нагреве все поведут.

[@indian.techsupport]

Ein sehr tolles Projekt. Es ist immer schön zu sehen, dass solche Sachen auch Zuhause gemacht werden können. Wenn man drüber nachdenkt fühlt sich alles in Richtung Fliegen und Raumfahrt so unerreichbar an. Danke für deine Mühe.

[@SirRobinII]

your neighbours must love you 😂

[@renaissanceman5847]

WHAT???... WHAT DID YOU SAY?!!! i CANT HEAR YOU!

[@jamestunedflat8942]

German precision consisting of grind stones and brute force. Das is gud. 😂

[@speedingSloth]

Was sagen deine Nachbarn? 😅 Ich würde mich dazu setzen und zuschauen. 😂

[@Praendy]

Moin, das kann bei meinen coolen Nachbarn durchaus passieren.😁 Kommt sehr selten vor, daß ich den Motor mal im Garten zünde. Mfg Andy

[@ole4470]

Wenn er mir das in den Rasenmäher einbaut darf er gerne mein Nachbar sein 😅😂

[@PetroniloAlcain]

​@@Praendy14:31

[@alonzoalgerdas6802]

Werner von Braun in his laboratory 😎👍

[@almegdadkhalid5522]

​@@PraendyGroßartige Arbeit, Sir. 👏 Anscheinend verfügen Sie über jahrelange Erfahrung und ich wäre Ihnen dankbar, wenn Sie mir helfen könnten Als Abschlussprojekt möchte ich ein Turbinenstrahltriebwerk mit 10 kg Schub bauen. Aber ich habe Mühe, ein zuverlässiges Design zu finden. Haben Sie eine Idee, wie ich ein praktisches Design bekommen kann? Und können Sie mir aus Ihrer Erfahrung bitte einen Rat geben?

[@ryansmithza]

Neighbours must love you! 😂

[@YeahMan8]

I always thought those Germans have a factory at their backyard

[@markgerard363]

Thank you for the Subtitles!! I really appreciate it!

[@therflash]

Just a little PSA, if the turbine or a compressor stage explodes, it will send a lot of very fast shrapnel in all directions perpendicular to the main axis. Please don't have people sitting in the death zone.

[@Waymeytc]

Das was du machst, das war mein Kindheitstraum, sowas zu bauen. Absolut stark! 💪

[@assarstromblad3280]

Would be interesting to see if this change gives it more thrust? Great work!

[@pernormann4869]

I enjoyed this, a lot. Good narration (I think I got it all despite not being German) and thank good no disturbing music.

[@philippthill6501]

Other people's hobbies: gardening, photography, jogging. The german: Building a fucking jet engine at home haha. Really cool, happy to have found this. Also his neighbors must love him.

[@samuellavallee3772]

My guy is going back to his roots lol. Awesome build tho

[@NwoDispatcher]

Germans are incredible people. May they come out of their cultural malaise and reject their guilt peddling bullies

[@OilBaron100]

That bench test was amazing to watch. How many kilograms of thrust did the engine develop?

[@stellisch]

Looks like about 15kg

[@ArcturanMegadonkey]

This is working really well, that NGV made a difference. please don't allow anyone to stand in line of the rotational axis of the turbine wheel when it's running, when they let go the parts fly out sideways especially with no nozzle on. I've seen it/had it happen a few times

[@Praendy]

Hi, I know the hazard areas around jet engines. So far all went well and the max rpm (70 000) is far away. Do you own some jet engines from Phill, or did you record the videos during a testrun? I like the axial comp sound👍👍👍 At the moment I am building a bigger housing and diffuser section. Still looking for thrust😁 Andy

[@ArcturanMegadonkey]

@@Praendy Hi Andy, the axial engine and the Barjay replica are Phills although I do have a couple of his engines which are smaller. I used to help Phill at this workshop when he was making the Wasp engines and others and sometime about 6 years ago we met up so I could film the axial and Barjay replica. Look forward to seeing more runs and improvements Paul

[@matelusglord3814]

Напоминает серию видеороликов с канала " Игорь Негода" где автор с нуля создавал турбореактивный двигатель из турбины от автомобиля.

[@seventeenshaun6424]

Das ist wunderbar. Baue einen Dämonenkern.

[@0512d1d]

good job wonderfull machine respect and well made. cooling is important especialy the bearings. i had the same problem with cooling and lubrication to the bearings it sounds that the turbine touches the NGV system axiale. i think maybe 2 mm more clearance will solve it.

[@ВасяПетров-м6с1г]

Соседи радуются!!! Когда работает двигатель

[@dev-debug]

Very cool, throttle response seems good.

[@williamwinsor7376]

Best start so far! I would be very happy.

[@HansMueller661]

Cool! Toller sound. Kannst ja den Nachbarn erzählen, das ist die neue Wärmepumpe 😂😂😂

[@eastindiaV]

1:43 it should be opposite, blades facing the hole inwards, and an outer mounting system with ball bearings, like a tank turret ring. Then, the turbine can be made any length.... creates a fire tornado, which is great, also quieter.

[@eastindiaV]

Another way of increasing efficiency in a somatic way (same thing, slightly different variation), is changing the type of air intake, and the type of nozzle. At that point, you want it to run as effectively as possible, on the lowest quality fuels, so it can always go up a fuel grade and work even better.

[@eastindiaV]

The "Can" turbine... I like aerospike engines, with a partial RAM air intake, like on the J51 motor

[@MasboyRC]

This nozzle guide vane look so beautiful 👌

[@Praendy]

Thank you👍 Andy

[@MasboyRC]

@@Praendy my pleasure, greetings from indonesia 🇮🇩

[@TheElectronicDilettante]

Well done!!!! When can we submit orders for a Turbo-Shaft variant? I need one for my motorcycle .

[@dannymiester5825]

Just the neighbor you need

[@donchristie420]

Dogs freaking out

[@182mm]

독일의 기술력은 세계 제일!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@jeisonarleyortizacevedo1666]

nett. herrlich. Scharf. perfekt. Alan. Gibt es nicht etwas, das dieser Typ nicht gut kann? Kannst du einen Pulsreaktor machen? Grüße aus Argentinien.

[@Praendy]

Hi, Thank you😊 Do you mean this? kzbin.info/www/bejne/pJeXe3abp5Wcptk Andy

[@bluestonebest1893]

The video: *speak german My friends: are you building a V2 missile again? me: No! wait... how again?

[@raygun23]

LOOL I use the EXACT same electric lighter for the ignition on my home turbine build. Im going to wire it into the combustor liner, to keep me as far from the monster i created as possible, however the voltage drops the longer you make the wires. I had a thought of stripping the rubber off the wire ends, & inserting them into thin glass capillary tubing for higher temp electrical insulation. you're an inspiration.

[@abn8726]

Before shut down its necessary run up in idle to equalize temperature to avoid damage.

[@moviemenia9276]

What is the max thrust? And what is the fuel consumption rate?? Can you confirm that?

[@MACE1-1]

Very nice project! Great accomplishment!

[@Mr_Ason]

Негоду гляньте)

[@-aliensmithy5327]

I am watching your KZbin with pleasure in korea merry christmas

[@Praendy]

Thank you very much😊 I also enjoy watching your videos from Germany. Will contact you via email👍 Merry christmas to Korea. Andy

[@-aliensmithy5327]

I know of several companies that make small jet engines in Europe. Could you possibly buy fuel pumps for jet engines with a thrust of 100 kg or more? For example the fuel pump of jet cat p1000 or pbs tj 100 and tj150. I'm looking for a fuel pump with 3lpm performance at 6bar. They don't answer my emails. can you do my favor? If I can't buy a pump, I'll have to make the pump myself. Pump development is difficult because there is no company that makes a small amount of small gears or the like.

[@Praendy]

Hi, I will check that out, but I know it will be difficult. Andy

[@wesleysergio7456]

O que eu observei, é que ela não incadesce a turbina de saída, parabéns

[@sidahmedbenabderrahmane9118]

Good job. Can you share the architecture please? Thanks !

[@Praendy]

Hi, there are no plans. Sorry Andy

[@sidahmedbenabderrahmane9118]

@@Praendy OK thanks. Do you have an idea where I can buy the same RC with the servos and the mini fuel pump you used in your engine?

[@Jagdtyger2A]

I really do wish you had this dubbed in English along with a materials list in English so we could try this our selves

[@Praendy]

Hi Steven, English subtitles should be available. Can you get a 2nd stage turbine wheel from a Tornado APU? Then I can send you some specs and measurements. If you dont have the same wheels, a material list is useless. Andy

[@Jagdtyger2A]

@@Praendy Unfortunately my eyes suffer from Macular degeneration and reading small print hurts. This is why I had to retire as a machinist.

[@karandeepsingh8498]

Just amazing! I am pursuing my aerospace degree but even then I can't say i could make something like this it's truly amazing sir your talent and knowledge and skill level at apex. I love jet engine even i thought of making one but thought can't be made by own but just saw i am amazed, i know it's a lot to ask could you guide me a little bit how to start building or even just try to make it i know i can't make it as good you made but I could try, atleast if you could guide in any way ? I hope, I am from India and just learning about the aeronautical and aerospace. I would be truly grateful if you guide .

[@Praendy]

Hi, thank you very much. Thats my very first jet engine and I am still learning too. You can click on my channel name "Praendy" and you will find all videos.👍 Andy

[@karandeepsingh8498]

@@Praendy thanks for replying, yeah i checked it's amazing, I am just concerned about the material selection i am currently at the conceptual design i hope if you could help me with that or any study material that I should follow. ✌️

[@NANDOFFDataRecovery]

Awesome build .. Did I see 35KG static thrust? 😎

[@Praendy]

Hi Mark, only 35 pounds, (18Kg without nozzle and still 10 000 rpm to go)😊 Andy

[@NANDOFFDataRecovery]

@@Praendy still very impressed 💪😎

[@linandy1]

Excellent precision craftsmanship.

[@Jiggi.G]

Hi! I am really impressed with your work and taking this on as my FYP in Mechanical engineering. I will need some help doing the cost analysis and procurement of parts. Would be really helpful if I can get in contact with you.

[@neilmchardy9061]

Wow the turbine runs so cool overheating is a big problem. But 500deg.that’s great

[@mikkopow4528]

Endlich wieder mal n‘Bisschen Turbinen-Content vom nördlichen Nachbarn!😍

[@pauljs75]

Seems like it runs pretty good once started. Might need to figure a way to keep it spinning on cool-down so you don't get any warping or other similar issues. My limited understanding is stopping a jet turbine while it's still hot may lead to bad news regarding its maintenance. And is the scraping at the end on the outer periphery or is it the bearings?

[@Praendy]

Hi, the ngv is not the problem. I figured out the engine housing, where the ngv is screwed in, is a bit warped. At the moment I build a new "bigger" housing and the problem will be solved. Usualy I use a 90mm electric impeller in front of the air intake to cool down the engine. Thank you😉 Andy

[@melissarainchild]

Poor neighbors! I want one o those!!!!

[@abhishekgourav6144]

I have been learning German for the past few weeks...I hope this is right....Das ist schön..

[@Praendy]

Hi, Das ist richtig😊 Thats right, thank you Andy

[@alvindixon7104]

If heat is a problem make your turbine jet engine into a turbine fan engine.

[@Yaivenov]

Your work is an inspiration!

[@boydjensen3161]

Quite an engineering feat! Now you will have to find something to mount it on... a huge model plane!

[@Praendy]

Hi Boyd, I found something for the engine😉 kzbin.info/www/bejne/j5i0lqB4jtaahZY Andy

[@Erforschen]

So gut، habe ich auch eine Mini gebaut,aber noch nicht genau!

[@Jagdtyger2A]

I could not read the scale, what was te thrust?

[@Jagdtyger2A]

@@comedicsketches Cool and thanks

[@Praendy]

Hi Steven, the thrust was not important in this test. I am still missing j lot of thrust for this big engine and I am working on. Thank you👍Andy

[@Praendy]

@KZbin Indonesia Hi, the engine is 11 Kg. Andy

[@Jagdtyger2A]

@@Praendy Sounds good, best pf luck

[@bloodbound696]

question... Thermal expansion of the blades and inner walls ? may have them grinding the wall and blades grinding?

[@321aguila]

Right but the walls expands to, not at same rate but it expand

[@rcpowres]

Ah einfach super!!!!kann leider nur einen Daumen hoch gehen !

[@joseabrahaoabrahao7937]

Sie haben gerade demonstriert, wie ein selbstgebauter Reaktionsmotor funktioniert. es funktionierte sehr gut, ziemlich effizient. Herzlichen Glückwunsch, gute Arbeit geleistet.

[@Armafly]

Well done! Congratulations!

[@cyborghobo9717]

Try laser welding next time .

[@tar244you8]

tig welds

[@Jkauppa]

one way to make complex parts easily is to 3d print them, a base form, then coat with conductive paint and electroplate thick walls directly into correct form, then remove/detach the base plastic mold, re-do to copy

[@cucumbercow7379]

oh no not an integza fan

[@Jkauppa]

@@cucumbercow7379 oh no, electroforming :)

[@balladbuster5109]

Hello, thank you for your comment. I'm very interested in the process you described. Would you kindly suggest resources I can access to learn more? Electroplating 3d prints. Very nice idea.

[@Jkauppa]

@@balladbuster5109 its just generic electroplating on plastic, just 3d printing, cad digital process

[@balladbuster5109]

@@Jkauppa thanks

[@ichbrauchmehrkaffee5785]

Geil wie er einfach hingeht und das Ding im laufenden Betrieb anfasst, um zu gucken wie warm das wird, so nach dem Motto: "Wenn's stinkt, war's zu warm" XDDD Aber geiles Projekt

[@mohammadeymeri1391]

F14 Tomcat Engine😁😍👏👏

[@Flumphinator]

That’s a lot of dank Mathiases.

[@chiron9536]

You just gave me a great idea my good man

[@Praendy]

Hi, Thats good😉, go on! Andy

[@gregtaylor6146]

Hans Von Ohain would be proud.

[@cameronskinner6197]

100% the neighbours are calling the cops/national security services. Also, undoubtedly very cool!!

[@ahmddeb2001]

Hallo, das ist eine tolle Leistung, aber ich möchte wissen, welches Metall in den Klingen verwendet wird

[@af0ulwind115]

So i am a bit of a curious man, and i wonder if one could have the fins mounted from a rail on the housing that spins inward with no central shaft or secondary purpose for a shaft such as to move the air around it in a configuration to cause the bottle neck at a rocket expansion cone just after the fuel is mixed, so that when the air fuel mixture exits the choke point the compression of the air is great enough for it to combust the fuel in the cone for maximum thrust... secondary air stream around the outer circumference of the rocket cone to create force vectoring?

[@mohammedeid4569]

Hi friend , we really need video about kj66 how guid van and disc turbine made , many thanks

[@FriendlyCynic]

imagine you turn on the lathe and the whole chuck flies away

[@ImpulsiveMigea]

Hi! What was the max thrust?

[@slepenb]

now let's put the wings on it, mount a gun and load the ammo

[@Invin7lord]

давно я такой боли не испытывал это же надо так абразивом станок обсыпать, как панировкой

[@Praendy]

At 6:06 you can see a thick paper on the machine😉 Dont worry, I will not destroy my lathe. Andy

[@bleona-hp7gs]

Rose : hey charle ! Charle : what ? Rose : the nieghtbourg is playing with his homemade jet engine again ! Charle : call the fcking nasa

[@Praendy]

Hi guys, Thanks for watching and asking. The engine runs very well, but I am still missing some thrust. If you want to see the first job for the engine, please click the link😊 kzbin.info/www/bejne/j5i0lqB4jtaahZY Andy

[@Ultracruiser120]

Bitte nach dem Projekt eine Turboprop Variante. Hätte Interesse für mein Flugzeug 😂

[@osamemohammad3261]

Es ist eine große Gasturbine, die einen enormen Schub haben muss.

[@elomuskreal]

I would move to Germany to be your neighbor xD

[@BekKOWF]

what is the most efficent blade angle for n1 n2 and n3 shaft for turbojet engines (totaly not for backyard f16c viper)

[@Praendy]

??? I dont know😵‍💫

[@ArneChristianRosenfeldt]

Hydro turbines introduced so funny names, but I understand that axial compressor blades mostly lie in a plane ( small angle ) to press into the chamber. Turbine blades on the other hand are "vertical" at angle 90° for maximum torque. So I understood that the exhaust velocity is far above the velocity of the blades? So it seems like that we could just place counter rotating n1, n2, and n3 ( co to n1 ) turbines in series. With guide vanes before and after this stack.

[@chrismitchell45]

Outstanding!

[@davidrobertson5700]

Please make reheat afterburner

[@Praendy]

Hi, Some time ago already done😉 Andy kzbin.info/www/bejne/fne1o3tra8-Dp8k

[@kairohmann4350]

Sonntag Morgen 06.00 Uhr. 😂

[@cvv2k]

So cool

[@speidereik]

I think it will be Whats we call 1.4301 oder auch AISI 304 (V2A) und 1.4404 oder AISI 316 (V4A). I’m pretty sure!

[@-aliensmithy5327]

I use ngv and turbine inconel 713c. Haven't tried the 316 or 310s, so I'm not sure if they can handle the heat. The temperature of the exhaust nozzle can reach 900 degrees, so there is no problem using 316.

[@djisydneyaustralia]

On startup the flame was ignited around 8 o'clock, I noticed flame exhausted around 3-430 o'clock on warm-up. Is this because there's a localised flame front for each combustion cycle as it warms? Do you have internal ignition? Or once running it's in auto-ignition from previous combustion?

[@Praendy]

Hi, There is a lighter in my hand to ignite the fuel. Once ignited there is a steady combustion like a gas torch. During spoolup the fuel is on the lowest point and because of the direction of rotation the flame appears 4-5 o clock, until the idle speed and the pressure inside the engine has stabilized. Andy

[@djisydneyaustralia]

@@Praendy thank you for the reply

[@johnjenz3803]

rear turbine temperature and hood cover?...am curious?...i saw you touch it

[@Praendy]

Hi John, The engine casinh in the back is not very hot in idle. ~150-200°C The exhaust temperature is much hotter 500-700°C. So it is possible to touch the engine a short time, to feel any vibrations. Andy

[@RV-ky1dr]

Congratulations!!!

[@anderstorndahl7866]

Awesome😊

[@MrMadbrowncow]

I wish I spoke German

[@Jesters-Jinx]

Click show transcript. OR CC in english.

[@turbine35]

Könntest du mal ein Video vom wuchten machen? Deine scheinen ja sehr gut gewuchtet zu sein. Das war damals bei mir das größte Problem.

[@Praendy]

Hi, Ich habe eine Wuchtmaschine ergattert und darüber auch ein Video gemacht. Vorher habe ich mit der Hand gewuchtet, was bei 2,5 Kg Rotorgewicht schwierig war. Mfg Andy kzbin.info/www/bejne/gX7JZI1nlLaJfJIfeature=shared

[@abdelhedihamedsghair6114]

können Sie detaillierte Videos hochladen, die jeden von Ihnen durchgeführten Prozess und die Herstellung jedes Teils erklären

[@Praendy]

Hi, click on my channel name "Praendy" and you will find all videos. Andy kzbin.info/www/bejne/a3a3pn2LfceMa8k

[@Geri_crs]

natürlich nen deutscher :D geiles gerät

[@ichosolemanuel6048]

warum natürlich?

[@jackopschmitt5262]

Wie viel schub waren es am End bei wie viel Umdrehungen?

[@Praendy]

Hallo Jackop, Bei dem Video waren lediglich 15Kg bei etwa 40 000 U/min. Hier ist der aktuelle Stand vom Triebwerk. 46 Kg Schub und noch 10 000 U/min bis zur max Drehzahl übrig😁 kzbin.info/www/bejne/imquqndmrrWSi9U Andy

[@jackopschmitt5262]

@@Praendy Dank für die Antwort! Sehr starkes Projekt. Wir es Pläne zu nachbauen oder einen Bausatz geben? Und noch eine letzte Frage: Worin unterscheiden sich ( bauartbedingt) deine Turbine von Projekten wie Gravity oder dem Jetman. Da diese Turbinen extrem viel leistung haben müssen? Grüße

[@Praendy]

Hi Jackop, Es wird keine Pläne geben, da es ein reines Funktionsmodell ist und mit 12 Kg viel zu schwer ist. Unterschiede zu den beiden flugfähigen Verwandten gibt es keine. Auch diese Triebwerke haben die gleichen Bauteile, wie mein Modell. Um damit fliegen und vor allem starten zu können haben sie nur mehrere Triebwerke. Meins könnte im momentanen Zustand maximal 46Kg an Gewicht senkrecht in der Luft halten. Andy

[@eddieklevin8620]

Nice man, do you sell it?

[@vinzfighter6963]

Is not home made, it's shop made😂😂😂😂

[@mohamedshafeelmohamedbilal6364]

Own effort will be home made

[@RFA1988]

Neighbor: what is he up to now

[@Jan_Seidel]

*yay* Andy is back. Hab schon sehnlichst auf weiteren Content von dir gewartet 😃 Was wiegt der Motor eigentlich? Ich denke, Du hast da ein exzellentes GEwicht/Schub Verhältnis.

[@Praendy]

Moin Jan, leider nein! Der Motor wiegt 11 Kg, da ich überhaupt nicht auf Gewicht achte. Der Schub errechnete ist auch noch nicht annähernd in Sichtweite. Mal sehen, wie es mit Schubdüse aussieht. Momentan ist mieses Wetter zum testen. Ich melde mich bald wieder. Andy

[@jamesbao620]

RESPECT!!

[@yeetmeat_]

about the compressor part, were you able to buy a shroud that fit well with the compressor? if not, how did you design and machine the shroud to reduce the gap between the compressor and shroud?

[@AAKH1361]

فیلم کامل ساخت این موتور جت رو کجا میتونم ببینم ؟

[@Praendy]

Hi, click on my channel name "Praendy" and you will find all videos👍 Andy kzbin.info/www/bejne/a3a3pn2LfceMa8k

[@AAKH1361]

@@Praendy متشکرم

[@plav032]

Needs some cooling air around the outside of the stator to prevent too much expansion. I'm worried about material strength with that kind of RPM and heat, did you account for blade creep?