Precious Plastic - Build a PRO plastic extrusion (part 3.6)

[@ياسرالسمحي]

قناتكم وتجاربكم ونصائحكم هي مصدر إلهام كبير بالنسبه لنا كمهتمين بإعادة التدوير للنفيات البلاستيكيه وذلك مصدر فخر لكل الناشطين في مجال الحفاظ على البيئة وما تقدمونه من خبرات مهنية وصناعية يفيد بشكل كبير جدا كل أحرار العالم ... أشكركم من أعماق قلبي Your channel, your experiences and your advice are a great source of inspiration for us as those who are interested in recycling plastic waste and this is a source of pride for all activists in the field of environmental protection. The professional and industrial expertise you provide greatly benefits all the world's freemen ... Thank you from the of my heart

[@BTom16]

There is nothing consumer about this extruder. "pro" is an understatement. It's built like a piece of factory production equipment that needs to run 7/24 for 20 years between servicing. Absolutely beautiful.

[@paketwisatasamalonakodinga6696]

Well spoken ✌

[@paulbrouyere1735]

Thank you, I just sent your link to a 14 year old girl in Bangladesh who wanted to know how to recycle plastic waste. I told her to find a good mechanic. Really nice you made this open source so everybody can use it!

[@mustafahalukyilmaz102]

That is almost industrial. Really loved it. Extruder production companies will hate that :)

[@AS-ug2vq]

You can already buy very cheap Chinese extruders.

[@tomcatmeow69]

number one rule , never buy anything from China that has 3 or more moving parts.

[@konnath672]

Ooooooooooooooooooooooooooooooooooo ooooooooo

[@konnath672]

@@tomcatmeow69 oooooooooooooooooooopoooooooooooooo oooooooooooooooooooopoooooooooooooo ooooooooooooooo I oooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooooooooooo ooooooooooooooooooooooooooo

[@konnath672]

@@tomcatmeow69 oooo order ooooooooooooooooo October po oooooooooooooooooooopoooooooooooooo ooooooooooooooo oo oo ooooooooooooooooooooooooooooo oooooooooooooooooooopoooooooooooooo oooooooooooooooooooopoooooooooooooo o ooooooooooooooo o po ooooooooooooooo o ooooooooooooooooooooooooooooooooooo ooooooooooooo o oooooooooooooooooooopoooooooooooooo ooo over oooooooooooooo I ooooooooooo ok oooooooooooooooooooooooooooooooooooooooooooo ooooooooooooooo o ooooooooooooooo o o o ooooooooo po oooo oooooooooo ooOctober o ooooooooo oooooooooooooooor oo po oooooooo

[@jayjaytucker4338]

Just visited you GUYS PAGE DETAILED & ACCURATE WORK !!! HIGHLY RECOMMENDED!!!

[@TroubledTimes2024]

Definitely more of an overview then a how to but still interesting, never could find the plans on the site, downloaded a 650mb file but extracting showed tons of extracting errors.

[@Tizoc999]

All you guys are so hepfull to all. For the solutions and hope , thank you!

[@janinepeck119]

This is awesome, thank you for doing what you do! I have a list longer than my arm of all the things I want to make from recycled plastic, much to the skepticism of some family members :)

[@matusondrus8987]

I recommend you to add some thermal insulation to the extrusion barrel. BTW nice video, very well designed.

[@peter-basschelling6695]

Will definitely be one of the first upgrades

[@cristovienepronto2748]

Can you build one for me? I pay you.

[@manbobenterprises1176]

This is wonderful i wish these smart guys can put this in a bigger operation to help us, especially third world countries where only 1% of waste materials are re-used. plse get in touch with me

[@mamadoudiop5462]

Wonderful...Great demonstration. You contribution to make the world a better place is sublime.

[@Innovativewayss]

I really much inspired to precious plastic and now i am thinking to make my own plastic injection molding machine according to this design,,,, thank you very much

[@ianmwale9039]

Can U also make for me

[@celestialbeas9214]

I'll love to see how you guys machined the extrusion screw. Any plans to show how to machine that?

[@joshmdmd]

@Andy Burns CNC lathe would do it. You'd need to know how your lathe reacts to the code. Alternatively, the safer option is fourth axis on a CNC mill.

[@jameswalton15]

@@joshmdmd the classic way to do it is to offset your tailpiece and make the cut depth taper. I have an old school lathe

[@cristianbustos2183]

¿Podrían poner los subtitulos en español? Could you put the subtitles in Spanish?

[@benediktbeck8480]

Robotdigg is Selling it!

[@danielboom26]

You are a fantastic craftsman, congratulation, greetings from Colombia

[@ralphjennings9064]

Great built. I probably make one in the future for home projects.

[@martintorres5829]

hey thanks a lot for share a good project! you guys maked a little best my morning

[@Hartek-Extruder-Manufacturer]

Wonderful！ unbelievable you can make the machine by yourself.

[@mrjoe9460]

Outstanding mate ! THANKS !

[@hiureanderson]

uow!! That was amazing! I'm suffering from the alignment of the base to the barrel, and now with this flange the project is much better!

[@carlosgianpaulrinconruiz5558]

You are an amazing team

[@princeofprussia9120]

What is the durability of the plastic product? For instance in another video you discuss making plastic beams. Are they UV resistant? Maybe you can make a deck out of it, but if it will just crack when exposed to the sun it might not work out.

[@sohardtogetID]

Would be nice if you could show us how you made an I beam (@ 25:42) with is machine. I have been recycling EPS foam to make concrete slabs for my own uses and your videos gave me a new idea. Thanks and let's recycle.

[@ericmieremet]

Hi, How do you do the EPS recycling? What are your kind of sources, do you define quality what is the end product and what steps are done to get the end product. Thank you :-)

[@dgb5820]

Your engineering is outstanding as well as this video production, very clever well done

[@austin-johnluckhoff2094]

You guys should sell the machines. I for one would love to own one to make borders in our community gardens. We do now have the manufacturing machine's or skills to build it ourselves. But i know we will be able to operate it and expand our non profit tremendously with one of them

[@danvandertorre6349]

I think I will build one thanks guys from Canada .

[@gentiligiuliano7882]

That's as good as the finest industrial machines for the purpose.

[@dorin.A]

realy realy..... great job,,,,, complimenti davvero...

[@weldmachine]

Great watching this video. I have no plans of building one. But it was very interesting following along. Thanks for sharing your ideas. Peter.

[@regpugh9021]

I have watched the build a few times and will probably build one, i have a few projects that i would need a n extruder for. These videos are really good. Can you give me and your other subscribers an indication of the output of the extruder, Kg/Hr of Polypropylene, also how many Kw you would need for the heater bands. The parts i want to make are an extruded part, 3 types, approximately 1 metre long. I am a retired Toolmaker and have a fully equipped engineering workshop. I hope you keep up the good work with these really good instructional videos. Reg

[@MrBoombomrom]

thank you for doing all these! is awesome.

[@rajat9457]

Please share video link in which you are making yarn from PP extruder.

[@joseolmos5254]

Excellent video....good ideas ....thank a lot!

[@alaaserageldin1531]

thank you for your effort, it's very useful knowledge. my Question is may i use this machine to extrude PVC like electrical hose?

[@gayanmuhandiram2831]

Thank you. This is an excellent video.

[@qweqwe700]

i find your chanel so inspiring

[@eggomando]

Excellent video, how many horsepower is the engine?? Tanks

[@ciro1342]

Very interesting... Do you have any videos to make plastic pipes from extruded recycle plastics?

[@timothyrodewaldjones8808]

You made a wonderful machine

[@АлександрА-т9й6э]

Вы молодцы ребята, успехов вам.

[@adhdartist1994]

I appreciate so much you guys doing this. Now I have to figure out how find all the pieces

[@daneal7874]

Well done guys

[@AvtarSingh-xv1vc]

THANK YOU FOR KNOWLEDGE VERY GOOD IDEA THANK YOU AGAIN SIR YOU ARE GREAT HERE KARISHNA

[@siriratwannarat149]

looking good. cool stuff

[@matthewnjoki1742]

Masterpiece indeed!! good job

[@wintaadhitiaguspara7786]

Bravo dude ... clever idea, like it much

[@robsonwaynneantonio9472]

God job my friends...👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼🇧🇷

[@BikesGarage]

Thanks for sharing this informative and useful video

[@fikrug2]

Thanks for the video, how can I find the heater?

[@jhonymiranda8981]

Le escribo de La Paz Bolivia y en mi ciudad hay mucho por reciclar....👍

[@Rocii1989]

HELLO, congratulations for the video and the work, a question what measure of wick would I have to buy and the spout (the shirt) of what measure would it be? Excuse me, my English, I'm from Argentina. I would appreciate if you could help me thank you very much

[@muhammadayub9834]

Great Job

[@tafariamaya]

Lots Of Information Guys, I just have one question though, Can I Use any type of steel on the extruder or is there a specific type ? Thanks again Keep The Knowledge coming

[@alirezaa3884]

Excellent, thanks

[@jasisaac7470]

Your a big help

[@technomania2752]

Its perfect machine . No need of any kind of update

[@wiriantowirianto8998]

you are awesome guys

[@arenaengg8082]

Can we use this for blow molding. Please make attachment for blow molding. Thanks

[@abunawasnawas7655]

Please to build fiber from pet waste.... I always waiting ur video.... thanks God bless u and ur team.....

[@gedeonselemanitambwe3175]

I can only say thank you for this amazing work!

[@ferasbaroudi74]

i would recommend to buy the screw and the barrel already manufactured from a Chinese supplier ... this is all you need to make it a real extruder

[@gervasio5132]

exelent! amazing your work !!

[@dushanthdushy376]

Awsome i really need this .. 😍

[@ronaldlogan3525]

very impressive !

[@EslamsLab]

great project , i'm also making my own filament extruder but small one :D

[@victorrafaellopezguzman3866]

Exelente por favor una version en español seria fenomenal.

[@marklawrencetordecilla3007]

Hi One Army, I would like to ask if this type of extruder build can extrude a mixture of hdpe plastics and sand, to form bricks? thank you in advance !!!!!

[@Viperdwarrior177]

Please share the link of making small machine

[@Alcamprieto]

Deberias poner un apoyo al final del tubo para no dañar el motor. La union puede ser con aislantes de lana de roca. Es demasiado largo para trabajar en voladizo y que no influya en el eje del motor pasado un tiempo.

[@stager33]

Why did you mount motor high if it was 180 down your center of gravity would be lower and room for a big hopper.

[@vivekdubey9061]

That makes sense, it could be hanging down the table 👍

[@hipopo9951]

Thank you Good job 👍👍

[@ericpeterson6520]

Great video!

[@coldtrader4737]

Real engineer

[@gregoryvrooman9546]

By the way. I will try to do my part to insure you do not run out of raw material.

[@moritzn.g.7205]

good stuff. gotta get it out there!

[@caronhezekiah6434]

in the video you said about blueprint for the extruder so I want to request for it

[@OneArmyVideos]

Hi. We've made starterkits to setup a fully equipped Extrusion workspace yourself. You can DIY and make the machines or BUY a kit to make it easier. preciousplastic.com/starterkits/overview.html Up to you, we are happy either way. More people recycling plastic! :)

[@beaukayson929]

i guess im asking randomly but does any of you know a way to get back into an Instagram account?? I was stupid forgot the login password. I appreciate any tips you can offer me!

[@killiankairo4176]

@Beau Kayson instablaster ;)

[@beaukayson929]

@Killian Kairo i really appreciate your reply. I got to the site on google and im trying it out atm. I see it takes quite some time so I will reply here later with my results.

[@beaukayson929]

@Killian Kairo it did the trick and I now got access to my account again. Im so happy! Thanks so much, you really help me out :D

[@killiankairo4176]

@Beau Kayson happy to help :)

[@khyquer]

Amazing project.

[@rudajonas8366]

Good evening i wish. How much does such a machine and postage to Florida cost?Thank you

[@bazookamoose7224]

The tig part hurts my brain a bit, why not on single piece turn and mill on the billet material is a bit confusing for me, but I get it for pipes. also, make your self a rotary for your 4g tigger 🤣

[@cesaraugustolopezgallego7905]

excelent

[@joshuamercado9196]

Add a rupture disk so the extruder doesn’t build to much pressure and blow

[@hamtaro1982x]

Hi, wow dit is iets wat ik zeker zal gaan bouwen.. maar waarom in vredesnaam is die motor zo enorm groot?? dan heb je toch bij lange na niet nodig hiervoor? en dan ook nog die gear reductor?? die motor kan toch zeker 3 maten kleiner?. Top design verder om mee verder te gaan wel. keep it up guys! gr

[@peter-basschelling6695]

Uit testen blijkt dat er wel rond de 100 Nm aan koppel nodig is. Kleinere motor kan ook, maar dan moet het (maximale) toerental ook evenredig omlaag met het vermogen. Deze motor is 3 kW en 260 RPM (uitgaand). Dan zijn ze nou eenmaal zo groot.

[@jipadan]

how is the motor fixed on to the table? wouldn't be better to have the motor under the table ?

[@tomsview5438]

How to make that heating part, which melt plastic

[@tomsview5438]

?

[@cealexis]

GOOD JOB

[@abhikhakal9606]

Bro could you guide how to design screw zone ? Or could you share calculation?

[@MayraAReyes]

Nice. Thanks for you generosity. Tell me if a can buy son of the parts that I need. I need to contact you to buy some parts that my friend is not expert. Of difficult to get a clean cut.

[@Ra1276]

Well done...that was very impressive...

[@frankcarbonell852]

I wonder if using a through hole into an gas heatreating oven this can be done without electric heaters? Also how many degrees to melt this plastic?

[@mariapaulagarces7174]

About how much does it cost to buy all of the materials for this project? Thanks :D

[@chrishayes5755]

my guess is $2000-3000 with the main cost being the motor. next big cost is to pay for machining. then cost of steel.

[@alfredo151000]

Excellent video, nice shop everything is very good. Thank you friend. Excuse me is posible have your blue print..?

[@Motivationsavelife]

Excellent

[@teknikidea3834]

❤ from indonesian🤝

[@shinratensei7982]

thanks for the tutorial, how much did it cost you to make this machine

[@peter-basschelling6695]

Around €2000 - 2500 for all the materials (in the Netherlands). This includes the screw, motor, frequency drive and heater parts.

[@jonnyd95]

Is there a way to buy the Extruder? Sadly I don't have a workshop, but I have a little garage where I can Recycle Plastic. Please answer Me.

[@robsonwaynneantonio9472]

Parabens ficou muito o trabalho 👍🏼👍🏼👏🏼👏🏼👏🏼👏🏼👏🏼🇧🇷🇧🇷🇧🇷

[@rodolfosamayoa2094]

I sow so.e differents things betwen 1rst video and this video. Could you pleas sell me the plans off this new machine Basicly the mecanic parts. Congratulations... This machine is perfect. Please were i can get the plans. Or send me this by autocad Thanks

[@احمديوسف-ر1ع]

Good👏👏

[@robinnickell9561]

you should make giant lagos

[@josemiguelcamposoliva6240]

Congratulations, its a perfect project. And the way to explain step by step is much better. Just we need the traduction in spanish, i speak english justa a littlel.