Premium PPF for Honda H'ness CB350 - Paisa Vasool results

#hondacb350
#infinityautosytling
#premiumPPF
For more details on the services offered by Infinity Auto Styling please see below:
Infinity new address :
NV Square, Shrishti Park, Balewadi, Pune, Maharashtra - 411045
Phone:
869 869 0009
Google Maps Pin:
maps.app.goo.g...
e-mail: [e-mail]
www.infinityautostyling.com
Services Offered:
Graphene Coating
Serum Coating
Premium Wash
Detailing
Wrapping
Paint Protection Film

[@raj7980]

No car or bike paint needs these gimmicks. I would strongly suggest for you all to attend a short course by International paints or Hempels or even Asian paints. One ends up actually damaging the upper coat.

[@therandomvlogger3726]

Hello brother.. Did they apply sumthing behind the honda logo to stick well to the tank? Bcoz when they remove it , the gum ll b wasted I guess.. Thnx

[@ananysingh07]

This is good to see, here i am with my 45 days old hness's saree guard paint chipping off :D

[@faizanchafekar2105]

Hness मधे headlamp चेंज होऊ शकते का?

[@vvvinayms99]

Hi sir...for matte finished bike, your suggestion please

[@RajkaGarage]

If you are in Pune, then yes they have option in matte finish aswel.. you can contact them for more details. But if not in Mumbai or Pune or around. Then you may need to check in your locality who has matte option available.

[@aniketilme1821]

Sir ye video me jo cb350 pr ppf ka work huva usko kitna cost laga?

[@wandererhobby2184]

Looks dope. Near job done 👍✅

[@RajkaGarage]

Thanks buddy 😊

[@raghunandangowda9607]

Hello Raj Bhai, Could you please tell me how to make rear suspension of CB350 softer? any setting to change so it can be softer/stiffer ?? Thanks in advance.

[@RajkaGarage]

Yes there is setting available for the rear suspension. There are notches on the bottom side of the spring which you can rotate by simply lifting up the spring with hands. This releases the tension from the adjuster and then rotate. There are 5 steps in the adjuster with longer step making the suspension harder and the smaller step making it softer. Not sure if this helps, but will try to make a small clip on this and explain. Alternatively you can also refer to the owners manual.

[@arunkannan5792]

Hi bro which are the side mirrors you are using

[@cjk9242]

Ceramic coating (3M) is done at big Wing service centres, cost is 4k for 2 years, (it's done twice )...

[@RajkaGarage]

I have done 9H Graphene which is upgrade to Ceramic in my bike.. the package was for 2 coats..but i did only one but found it to pretty effective as shown in one of the recent video where my dog tried to hug me by put his legs (nails) on the fuel tank.. graphene saved from any deep scratches.

[@jjumboxerox]

Is It Possible in Mumbai or else we have to go There Sir?

[@RajkaGarage]

This particular detailing studio doesn't have a branch in Mumbai. But there could be other options in Mumbai.

[@Originalrebelosho]

Best in 350cc segment

[@RajkaGarage]

Absolutely.. Cheers and Happy Riding 🤘

[@gauravG1614]

Hey brother how to install the maddog lights on xpulse

[@RajkaGarage]

Hey buddy, if you buy their harness along with the switch and lights, it's all socket to socket plug and play which even you can do at home. I will try to make a video on this soon and post.

[@deepplayzz4352]

Sir can u plz provide link for backrest that other cb had

[@RajkaGarage]

There u go.. saharaseats.com/honda-highness-cb-350-adjustable-back-rest

[@mirmasidurrahaman9868]

Raj Bhai rear view mirror buying link plz

[@RajkaGarage]

These are Suzuki Burgman mirrors buddy.. you can buy them from Suzuki service center.

[@balwanbharat818]

Lot of people asking you the cost of ppf job but you answered none! Strange! I would suggest public don't go for this ppf job. This is just waste of money as it won't last for even 5 years no matter how costly it is. I Have made enquiry with Indore based reputed company and they said for bike, it would cost 15-18k for TPU film with 5 yrs warranty. But after that when you would remove the film, it would destroy the original paint and you would have to paint it again means double kharcha!! Just polish the bike and carry onn, new paint's shine would last 5-7 years. If it fades, paint it with new colour. These ppf jobs are just waste of money if it's hard earned.

[@neerajnarwal9558]

no good quality ppf damage paint on removal if done properly. aachi quality ka language to par uski cost bhi utni hi zyada hogi. or repaint kabhi bhi original paint jaisa nahi hoga chiye kirna bhi skilled worker ho. uppar se aagar black perl paint ho to bhul jao repaint.

[@chnacr2]

This looks great. Even I always thought the rough cutting done around the Honda logo looked like supreme Chaprigiri, and was surprised that no one pointed it out on KZbin videos. Good to hear you say the same as well :D

[@RajkaGarage]

Hehe..that remark is natural instinct whoever knows what good quality work is.. basically what they do is just plastic wrap it can't protect paint for sure 😅

[@abhinandanghosh4056]

Wish they had a shop in Kolkata.

[@RajkaGarage]

Plan a ride to Pune.. 😅

[@abhinandanghosh4056]

@@RajkaGarage Looks like the only option at the moment 😂

[@mayurlondhe1517]

PPF cost ?

[@RajkaGarage]

Mine is regular DLX Pro..so the cost is 13.5k for Anniversary Edition 15.5k

[@mr.p141]

Bhaiya cost kitna aaya??

[@RajkaGarage]

Apna Anniversary Edition nahi hai toh 13.5K cost hai.. anniversary edition mein 15.5k ata hai .

[@mr.p141]

@@RajkaGarage OMG

[@MotoCrazyy]

Cost tho share he nahi kiya

[@RajkaGarage]

Sorry buddy.. description mein dalna bhool gaya..abhi dalta hu..

[@pulkit6204]

Bhai still not updated?

[@mashok1672]

Sir, No helmet required in Pune ? 😂😂

[@RajkaGarage]

Haha.. there are a lot of such items with the NO check list in Pune. Btw.. I was and always wear one 😁

[@kunalkamble2571]

Hi Raj - started watching your videos since I bought HNESS a week ago. And gotta say they’re very detailed and helpful, loved them. Especially about the oils. I live in Balewadi, Pune, and this place is barely 2 kms from my place. Quick question - what should I go for to protect matte green Color? Please let me know what’s the best thing to preserve the Color and if it affects the warranty. Thanks in advance

[@RajkaGarage]

Congratulations buddy 🎉 and thank you for your kind words of appreciation 😊. They have PPF option for matte colour aswell. There is one satin matte option which has a matte glare on it. You can surely try that.

[@kunalkamble2571]

@@RajkaGarage thank you, Raj. Appreciate the swift response. I’ll check with them. Thanks again.

[@vaisakhvijayan3360]

Ppf cost bro or approximate??

[@RajkaGarage]

For Regular version of the CB it is 13500/- for the Anniversary Edition it's 2k more due to the painted fenders

[@lakshaysharma7677]

Referring to your disclaimer about delaminating for CB, has Honda also done "chaprigiri" with the paint quality? 😂 Thanks for showing us all the options for protecting the paint. I'm getting the Anniversary Green option, so will see if we can get the Satin finish on it.

[@RajkaGarage]

Don't ask me about that mate..they have bribed me to keep my mouth shut 🤐😂. Matte paints are still better i guess. The gloss ones in recent batches is not upto the mark. But honestly speaking they are following a sub standard method of the Japanese paint process. It's anyways known to be with lesser coat thickness compared to the west world.

[@lakshaysharma7677]

@@RajkaGarage it's amazing how responsive you are to your viewers. It's like picking my brother's brains for detail about anything. In the showroom in my place, the sales manager at least accepted, and wasn't in denial about these issues. So that was a bit of a relief and we have quite a relationship now. He even offered to provide solutions for the lapses. And I, personally, go mental if I have to live with things that are less than perfect. I'm still recovering from Honda's chaprigiri. I'm glad we have your channel that acts as a healing touch. CB350 owners ke ansu pochhne vaale ekmaatra aap hi ho.

[@RajkaGarage]

Thanks buddy.. I always like to keep it a two way communication and find it may be disrespectful to someone if there isn't communication. Becomes diffificult at times with other core things of living, but better late than never is what I follow in that case. The first thing i would suggest after delivery is getting all the weld joints coated with some anti rust coating like i did with this bike. Will help in preventing and containing any corrosion on these parts. Rest it's a beautiful machine to enjoy on highways.. Cheers and Happy Riding 🤘

[@lakshaysharma7677]

@@RajkaGarage I always appreciate your efforts. The sales manager said he's getting a wd-40 based derusting solution and paint applied on the affected parts. I had recommended Tuf-Kote to him from your video. Can I use tuf-kote on top of it later? Whichever way it goes, he has taken responsibility for it and said he wants me to walk out happy on Sunday.

[@RajkaGarage]

If he is really getting some WD40 product as a rust prevention coating, then nothing like it. WD 40 is expert in such solutions..

[@vigilant.]

Not worth it for cheap bike