President Richard CB Ham conversion to 11 meter modification

President Richard CB Ham radio modification tom11 meter

[@hhawg1]

Thanks!

[@jasonausley]

Thank you very much. Very good to know.

[@wtrlvr241]

Heck ya, I've always ran a 27LTD classic and my buddy has one of these and sounds good so I was thinking about switching. Good video

[@robmiller7101]

Thanks great vid answered my question of running a jumper wire or micro switch to go back and forth!

[@Andreas_Jerphanion]

I always like to learn more. Thanks. I use a Kenwood Set 450s, but many People ask me for modifications President radio's. This whas not easy i think. Again superthanks

[@gillesg7560]

thanks for the clear infomation, thanks for you research and to share the mod. 73

[@ekimp252]

Here from your Amazon review, good stuff thanks for sharing

[@KevinModz65]

Thank you !

[@WPGinterceptor460Interceptor]

if you dont get the PD option, then go into the menu and look for RESET, select that and then select AL not BA and then reset then look for PD again

[@1066mart]

Made my day thanks

[@rogercarder7720]

Thank you for the info, Its a fine radio.

[@Patrickjdee66]

Thanks for your help, my Richard is now CB also , all the best Pal 👍🏽

[@KevinModz65]

Glad I could help, enjoy

[@RaymondMassey-k5r]

Mine reset when I bought I put the code in and it's just fine thank you

[@KevinModz65]

@@RaymondMassey-k5r glad my videos was able to help

[@darkpure64]

What's the long ground wire soldered in on the board? Mine doesn't have that.

[@KevinModz65]

I’m not sure, they probably eliminated it on later units. I had one of the first releases

[@alejandro78155]

Thank you Sir, good video.

[@jayzsphotography6]

I have a President Taylor and there is a secret menu to increase or decrease the power. I emailed the factory, but they gave me the standard "4watt and could not be modified" answer. Now how much of an increase I have, I am not sure, may only be a few watts, but the I would think The President Richard would have a secret firmware menu like the Anytone, to change it from a 10 to 11 meter. Thanks for the video.

[@FoxyLad]

A big thank you from Edinburgh in Scotland Cheers 👍👍

[@cooper.4x4]

thank you for this!

[@frankrobinson4453]

Thank you. Waiting for your review of the radio

[@truckerrespect7797]

Your awesome buddy. I just bought one, and didn’t know shit about radios. Well now I know a little bit. Thanks a ton!!!

[@jameshooper744]

Thank You

[@AEZAEZEL-187]

I am interested in the new President Washington which is a 10 and 12 meter radio but i can not seem to find any modification to make it a CB radio! I need a modification of the President Washington 11 meter mod Thank you!

[@ramgniredlum]

thanks.

[@bille9903]

I have been waiting on your long term review of this. How did it work out? After you put in the PD 1234 does it keep it in the memory after you power off? Are you able to switch back and forth between 10 & 11 meter

[@KevinModz65]

Hi Bill. Yes, this radio has been rocksolid. I have never had to touch it again since doing the modification. There is really no flipping back-and-forth between 10 and 11 per say, when you do the modification, it just adds an additional CB band on the dial. You don’t really have to flip anything if you know what I’m trying to say. You just continue turning the band knob to the band that you want up to and including 11 I hope I did not confuse you, it’s kind of hard to describe, but this is all very simple on the radio. It is as is 11 was already there for you.

[@19RHOANZ65]

👌 👏 👍

[@kishascape]

Do you get freeband 27 MHz like 27.635?

[@KevinModz65]

Yes sir that’s the whole motive of the mod

[@brettjohnson5755]

The president richard I bought came with a resistor soldered between those two points.. should I just leave it, or remove it, and solder in a piece of wire? I'm hoping that doesn't affect wattage. Sorry for the dumb question.

[@KevinModz65]

Hi Brett, no dumb questions at all. Did you buy the radio new? Do you get cb channels? A resistor between these 2 points is often installed by the factory to make the conversion easier for the user, they know what we do to make the 11 meter work. These radios often change revisions, I made this video with a very early prototype. I have heard the board has changed several times since. On their other models, removing the resistor is often all that is needed

[@brettjohnson5755]

@Flip2Flower1 thank you for the quick reply! It's a new radio. The place I ordered it from had an option to tune, and align the radio so it will work on cb channels. I'll find out in the morning if it works properly.

[@randallswetnam]

Do you lose 10m when you convert to 11m?

[@KevinModz65]

No, you retain everything

[@kjwalper]

K174W where in the world are you located?

[@KevinModz65]

@@kjwalper southern Illinois

[@hhawg1]

Same here. Alton, Illinois

[@robcole332]

What’s the benefit over a regular cb

[@KevinModz65]

Power. Regular cb puts out 4 watts, this does 100 watts

[@TimTM-gm6od]

Will this work on UK frequencies with the mod??

[@KevinModz65]

I am sorry but I do not know for sure. I would think so though

[@ВладКоля]

Как с 5 на 0 выйти?

[@brandonhughes858]

My radio lost/ doesn’t have the PD option in the menu. Cut it off and back on and it’s just not there. I have found it before and entered the 1234 but now I can’t find it

[@kerryzubrod8868]

That's not good, any help people?

[@jpdurr]

Horrible Design, Should have been the Clip a Single Wire conversion. Why do you think they did it this way instead????

[@KevinModz65]

I have no idea. Probably to pacify the fcc

[@jpdurr]

ok, not so confident in your mod when you don't show the finished product working. You have thrown this video into great doubt.

[@KevinModz65]

Well here, I have a simple solution to your great doubt. Don’t do the mod and get your hind end off my channel. Your problem solved 😛