Pressure Washer Gun Repair Kit STEP BY STEP

[@LSD04]

Thanks for the video, just did mine and this was helpful, thanks again 👍🏻

[@PressureCleaningSch]

Awesome glad it helped

[@kroperez6761]

Thank's Doug ! Without your video I'll couldn't fix my Suttner Gun.

[@PressureCleaningSch]

Your very welcome. Glad it helps.

[@dcsc4895]

your videos are excellent. Thanks for that.

[@asaholey]

Is the pipe inside the gun where the 3/8 quick coupler connected removable?

[@dougrucker6783]

Yes everything inside is removable. In fact I've used the little pipe before as short little extension wand.

[@asaholey]

@@dougrucker6783 so the thread is 1/4 npt Or bspt?

[@chanomartinez8327]

Hello, very good video, excuse me, does this kit fit the general pump gun? DG5010 and where how can I order it and what is the name of the kit? Thanks 🙏

[@PressureCleaningSch]

No, this is for the Suttner gun ST2305.

[@hectormontemayor5385]

Mr Rucker, where did you buy the stainless steel reducer coupling 1/4" FNPT by 3/8" FNPT at entry point of gun? I desperately need one. I've purchased several other items from your store, but I cannot find it there. Please help. Thank you. By the way, great, informative videos.

[@PressureCleaningSch]

you should be able to find them at home depot or Lowes, ace, etc. Plumbing supply.

[@hectormontemayor5385]

Mr Rucker, I've searched at all those stores you mentioned, to include the internet, and nowhere does anything resemble what's on your gun, i.e., the long neck that goes into the 1/4" pipe, and the 3/8" female is not thick like the one on your gun which probably affects the PSI associated with their reducer coupling thereby rendering it ineffective for a high capacity pressure washer. I really think if you made that item part of your store inventory followed by a video, you would have a high selling item. By the way, your gun swivel video prompted me to buy it. I'm sure I'm not the only person looking for that particular reducer coupling. Any further information on your reducer coupling would be greatly appreciated. Thank you for your previous response.

[@PressureCleaningSch]

@@hectormontemayor5385 I’ll get it up on my site this weekend

[@PressureCleaningSch]

Wait. There’s no reducer on the bottom of my gun. It’s just a 3/8 MPT coupler

[@Anubalfer]

@@hectormontemayor5385 I think you're looking for a 1/4" fnpt to 3/8" mnpt hex bushing. It is in his store with that name, but I also found it at my plumbing store Somerville in 316 stainless steel. I could only find brass ones at Lowe's and those broke all the time. The power washing companies don't seem to sell them at all since they're part of the wand. I have yet to find thicker ones, but the steel one I last used is still holding up.

[@brandonthompson9505]

Hey man. I have a Stuttner st-2700 SS and I bought a SS rebuld kit and watched your video. I was having an issue with my gun where the gun would constantly flow. I got to the portion where you have to use a screw to pull the tiny metal insert out and mine is so stuck. I've done exactly what you have done. I further went to try a torch ( didn't work) and pb blaster ( didn't work). Have any ideas?

[@PressureCleaningSch]

Yes just replace the gun. Sounds like it’s pretty well stuck. Don’t mean to sound rude but the time and effort in fixing one sometimes outweighs replacing it.

[@brandonthompson9505]

Thank you. That what I was thinking.. Do you think the stainless steel internal spray guns last longer than the brass?

[@PressureCleaningSch]

@@brandonthompson9505 maybe a little. But not worth the extra money IMO

[@smitty4699]

is there a repair kit for the mosimatic 29.132?

[@PressureCleaningSch]

I would think so but I’m not sure as I don’t carry that gun.

[@HouseWashingRick]

Mr Doug, I need a 325 or 350 poly water tank. Where is the best place to buy one?? Tractor supply is to expensive

[@PressureCleaningSch]

Pro tank. Tank Depot. Not sure what’s in your area

[@HouseWashingRick]

@@PressureCleaningSch I live in the middle of Tennessee, in a town called Cookeville Tennessee, right here at Tennessee tech. Just a T supply that's it, thanks for getting back to me

[@jc6416]

Hi Doug. In my country there are no specialized surfactants for pressure washing. What you recommend to use and whats the ratio of surfactant per gallon of SH. Thanks.

[@PressureCleaningSch]

You could try a laundry detergent.

[@jc6416]

@@PressureCleaningSch tide could work

[@adwhite804]

@@PressureCleaningSch Gain or Arm & Hammer w/ oxy actually work fairly well, & since they work with SH its a bonus .. especially in a pinch & they smell good

[@PressureCleaningSch]

@@adwhite804 tried then both years back when they became the rage but neither worked well on windows for me. Plus I wasn’t fond of going to dollar stores or grocery stores and buying a bunch of stuff than having to transfer it in the gallon jugs. Just a little too time-consuming for me.

[@Anubalfer]

The one I'm fixing is just a ball and spring, but it's leaking passed the valve when the trigger is disengaged and I can't tell why. Not sure if there's a seal missing, if the ball is worn down, or if the ball cradle isn't shaped right anymore. It only leaks out of the tips.

[@PressureCleaningSch]

Is there an o ring ?

[@Anubalfer]

@@PressureCleaningSch There's a little ring past the ball's cradle that the rod goes through but it's not leaking out of there. I put everything back together and it's still passing through. Unfortunately, it is now leaking from behind the female connector to the wand also. I can't remove the hose from the wand because it looks like the owner never ever did. It's really seized up.

[@timothytidmore6922]

Having same issue

[@Anubalfer]

@@timothytidmore6922 It's been a while, but I thought it'd best to share what I ended up doing. I removed the hose from the gun. The hose's connector was destroyed in the process so I ended up getting a new hose. I cleaned up the threads on the gun as much as possible, wrapped some thread seal tape around it, and connected the new hose. It sopped leaking everywhere. I really don't know how, but disassembling the gun, cleaning the ball valve and spring, and assembling it back together may have done something before connecting a new hose.

[@deannabeasley1078]

Great Thank you. Good Job

[@erikservices]

Thanks for the info

[@PressureCleaningSch]

Your welcome

[@petertselikis940]

Hey, i just bought a Harbor Freight 4.2 gpm pressure washer because I was in a jam. The nozzle always weeps. HF tech dept said that's normal and helps to keep the pump cool . That doesn't sound right to me. None of my other guns do this. What do you think? Return it or normal for this particular unit?

[@PressureCleaningSch]

That type of gun is most often used in car washes. Not good for what we do. I'd return it for a non weep gun.

[@petertselikis940]

@@PressureCleaningSch Thanks for all of the excellent information on your site. I will be ordering all of my pressure washer components from you.

[@PressureCleaningSch]

@@petertselikis940 thank you Peter. Much appreciated

[@spawnandbatman6975]

I have an issue were water is leaking out of the nozzle. I replaced all of the orings but water will still drip out causing my pressure washer to turn on or off or pressuring nonstop. My hose outlet and garden hose qd’s aren’t leaning either. ¯\_(ツ)_/¯

[@amandaandgabriel5950]

Hey Doug the guns you throw away i will buy (seriously) my gun is leaking and im just starting out and not able to buy new things I can afford to repair than replace. Thanks for the video

[@forwhatitsworth364]

My nozzle has had a slow leak ever sinse i turned 50.

[@HeliumHub24]

❤