PreUse Test Draeger

[@louwich8277]

Hello, One of our Dräger C500 vents will not pass Pressure sensor calibration valve and Expiratory valve tests. We believe this problem developed from using some sticky nebulizer treatments on a sick patient. We've tried replacing the expiratory valve and flow sensor three different times with no luck. Do you have any advice on how to get it to pass? Thanks.

[@asalkhodjaeva4064]

6.24 Its very important!!

[@asalkhodjaeva4064]

6.24 Yes, it is

[@asalkhodjaeva4064]

Hello! Could you please tell me how often this pre-use check should be done? Is it O.K. if its done every 10 or 20 days?

[@resptherapyedresources1997]

I do not know the number of days, but typically it is performed between every patient. Clean, please check, set up for use.

[@asalkhodjaeva4064]

@@resptherapyedresources1997 i mean, is it acceptable if last pre-use testing done 12 days before and ventilator was unused after that & directly was connected to the patient? Shall we do pre-use check 1 more time just before connecting to the patient or its enough?

[@resptherapyedresources1997]

I am not aware of a time frame other than regular preventative maintenance that is based on usage and time between maintenance. For best information on specifics, consult Draeger customer service

[@orionsglimmerofhope]

are the checks the same for the v800?

[@resptherapyedresources1997]

I am not sure. I have not used that ventilator

[@ozam35]

can i asck Question

[@resptherapyedresources1997]

Yes. I will try to answer.