Printer Canon IP2770 orange light blinks 5 times

Printer Canon IP2770 orange light blinks 5 times
The Canon IP2770 printer often experiences errors marked by an orange light blinking 5 times. Error events on the Canon IP2770 printer actually don't just blink 5 times, there are still some problems with the blinking indicator, there are three times, there are 13 times, there are 16 times or 15 times or 8 times, those are several types of flashing indicators that printers often experience Canons. Likewise for the Canon IP2770 printer.
In the case of this time, the printer blinks 5 times, the light blinks 5 times, this indicates that the Canon IP2770 printer has not connected properly between the cartridge installed and the printer. Or in other words the printer cartridge is stuck but the printer cannot detect that there is a cartridge in the printer. This is what causes the indicator to flash 5 times on the Canon IP2770 printer.
In this video I explain what causes it and at the same time how to fix it, my hope is that this video will provide benefits for friends who are experiencing an error like in this video. Even though I only show slide after slide, my hope is that what I explain is sufficient to provide an explanation to loyal subscribers of this channel.
That's what I can say regarding the Canon IP2770 printer with the case where the light flashes 5 times on the resume button. Sorry if there are any wrong words or explanations from me that are not clear, or not acceptable, or maybe there are wrong words from me. I apologize profusely. And if there is anything unclear about the content of this video, let's discuss it in the comments column provided below. We will be happy to answer question after question that my friends ask me.
tags:
Canon IP2770 printer orange light blinks 5 times, Canon IP2770 printer orange light blinks 5 times alternately, how to reset Canon IP2770 printer orange light blinks 5 times, Canon IP2770 printer lights flashes, Canon IP2770 printer, Canon IP2770 blinks 5 times

[@suhartini.y5660]

Ya Allah Alhamdulillah yerimakasih banyak pak,saya panik ,SAYA SUDAH BUKA yutub yg membahas kedip 5 kali trus saya coba ga berhasil ,trus sy cari lagi dan liat video bapak ini Alhamdulillah memberikan cara sama tapi ada tambajannya lap pake airvatau alkohol dan ternyata memang bersih chipnya dan Alhamdulillah bisa ngeprint lagi,semoga rejeki bpk lancar dan ini jadi amal kebaikan aamiin Ya Rabb

[@SuryaMiranto]

@@suhartini.y5660 terima kasih ibu suhartini. Terima kasih doanya. Sukses selalu untuk ibu suhartini. ❤️❤️

[@zulfari_anti]

Alhamdulillah..sudah bisa bang, syukron jazakallahu khayran bang

[@SuryaMiranto]

Terimakasih Kakak. Sukses selalu untuk Kakak.

[@mikaelsurya6603]

Terima kasih Kakak. ditunggu konten berikutnya Kak.

[@SuryaMiranto]

Baik Kakak terima kasih banyak supportnya Kak. Sukses selalu untuk kakak.

[@ebcloth7653]

Makasih bang sarannya 🙏🙏🙏 stelah dibersihkan berulang kali masih nggk bisa.. setelah di ganjel pake mika tipis Alhamdulillah berfungsi 🙏🙏🙏

[@SuryaMiranto]

Alhamdullilah Kak, terimakasih sdh memberikan komentar yang positif, sukses untuk kakak.

[@jesdahul8662]

Thnkyu om untuk tutorx🎉

[@SuryaMiranto]

Sama sama Kak. Terimakasih, semoga bermanfaat.

[@yuliatisafyra8374]

Terima kasih...tutor sangat bermanfaat

[@SuryaMiranto]

Sama sama Kak. Terimakasih, sukses selalu unt Kakak

[@petrussutanto5153]

gio am sudah ngelap juga lampu blink 5 kali masih tetap... selanjutnya gimana gio am

[@SuryaMiranto]

Berarti Catridge kemungkinan besar rusak. Ganti dengan Catridge yg baru Kak.

[@dhiopriasha7967]

Izin tanya mas, utk mika tipis yg di ganjal di catridge itu fungsi nya supaya apa ya ?

[@SuryaMiranto]

Terkadang pin konektor dibagian belakang Catridge, mengalami short dikarenakan konektor nya basah oleh tinta, mika plastik tipis, berfungsi untuk menghilangkan short yg terjadi.

[@indrabedhut9334]

kalau berkedip 4x gimana mas?

[@BangHenPunyaGawe]

Ijin nanya mas... Saya sudah bersihkan semua... Saya juga sudah ganjal dg mika... Tapi masih kedip 5x nih mas 😁 Ada solusi lain?

[@SuryaMiranto]

Kalo semua sdh coba dibeneri, masih kedip. Kemungkinan, Catridge minta ganti Kak. Coba dgn Catridge lama dulu yg normal.

[@BangHenPunyaGawe]

@@SuryaMiranto Alhamdulillah sudah teratasi mas... Ternyata coakan pada cover cartridge nya kurang dalam sehingga agak terganjal selang infus warna magenta 👌

[@SuryaMiranto]

Oh iya bener. Di atas, keni magenta, dibagian penutup cartridge nya, sebaiknya diberi lubang seukuran keninya. Betul itu bang. Syukurlah kalo sdh bisa. 🙏

[@BangHenPunyaGawe]

@@SuryaMiranto ma kasih mas, kerena video jenengan, otak jadi "encer" lagi 😁 #inspiratif

[@SuryaMiranto]

terima kasih Kak, senang mendengarnya.

[@mariaanjelinangura1517]

Mohon solusinya, catridge nya tidak jalan

[@SuryaMiranto]

Apakah lampu indikator ada berkedip Kak?

[@sitisundari5158]

Klu lampu merah berkedip 3X bagaimana mengatasinya

[@SuryaMiranto]

Dicoba dengan cara seperti ini Kak. Ini beda type, tapi kasus sama Kak. kzbin.info/www/bejne/lWSnqauXmKudi80