Pro Hair Clipper Needs Pro Engineering - Cutsware Manufacturing 101

[@legionofboombap4705]

Excellent! Thank you for the torque and rpm lesson. Indeed, every system is connected. I think I will build a 7000 rpm high torque clipper with a fat but not very heavy cutting blade and dlc coated stationary blade to keep the heat down.

[@CutswareGeek]

Go for it, share it online :)

[@valetudo025]

Bro, can you do a video breakdown about the vector motor clippers? The torque the blades, etc. ? Thanks

[@desmondmitchell5602]

Hello, what do you think about the new wahl vapor

[@CutswareGeek]

I'm trying to get one...

[@KD-tr1mu]

What brushless motor do you recommend for wahl clippers?

[@CutswareGeek]

The babyliss's brushless motor

[@KD-tr1mu]

@@CutswareGeek I would just use wahls original shaft or the one that comes with the brushless motor? Your videos are very informative

[@CutswareGeek]

@@KD-tr1mu you should change the babyliss shaft with wahl shaft, its a little bit tricky

[@Johnny-ue5pq]

I got a Gamma Alpha clipper, can I upgrade with a brushless motor? I need to change the shaft that came with the original motor to new one? I need to change the battery? Or just the motor and shaft it’s enough.

[@CutswareGeek]

Gamma Alpha's circuit board was not designed for brushless motor but you can do it, it's better to purchase a new rotary motor from stylecraft.

[@Johnny-ue5pq]

@@CutswareGeek I got a crazy idea. Can I upgrade a Wahl “replica” from AliExpress?, because at the end of the day, I need to take off the motor and battery, all this because is more cheap than buy a original Wahl to upgrade.

[@CutswareGeek]

@@Johnny-ue5pq remember, assembly quality matters more than hardware itself, if you sure you find the good motor, shaft, the battery and you can assemble it well and you know what rpm to choose without your clipper getting hot, go for it.

[@Johnny-ue5pq]

@@CutswareGeek Master, just one last question. I found two brushless motors, one for babyliss, with the little white plug, and other one, “special” to wahl, with a shaft that looks like wahl, with the the little ring in the red wire to screw it the switch, and the black wire to weld. The quality could be the same? Or I need to choose one specifically?

[@CutswareGeek]

@@Johnny-ue5pq if you are talking about that aliexpress brushless for wahl, i really don't know...

[@Kryptolistic]

Do you have any info on the brand 686 Cherry bomb "Detach" in particular They appear to be exactly the same as a set of clipper and trimmer by Cronier, it's just that there's an insane price difference. I want to buy one just want to know if the Cherry Bombs have a different blade or if they are the exact same thing. Thanks in advance. I had placed the Aliex links for both but my comments gets automatically erased :'c

[@CutswareGeek]

686 Cherry Bomb Detach is as same as VGR V-137, a very good, well designed clipper (some issues on blades heat which is global). About Cronier i could not find the set, please include a link.

[@Kryptolistic]

​@@CutswareGeek KZbin keeps deleting my comment when I include a Link :/ I'll add the item # if you place it in the search bar it sends you directly to the item This is the Cherry Bomb detach 1005006530935142 it appears to just have a fancy logo printed on the blade These are the Cronier both CR-1293 for the trimmer and CR-1294 for the Clipper 1005007537169803 I'll try replying with the direct link one last time

[@CutswareGeek]

@@Kryptolistic i have the exact same set in iran with a different brand and the material is as same as VGR V-137 but the blades are different, about these two brands we don't have it in this market, i kinda not sure about it to say if the hardware and material is different or not. I think you should focus on the blades, see which one you need and pick that.

[@Kryptolistic]

@@CutswareGeek Thanks! Will get the Cronier and might give the Cherry bomb a try later. Will keep on checking your channel, really enjoying all the info, varied amount of brands, blades, internal parts of the machine etc. It's a fun ride :D

[@Kryptolistic]

​@@CutswareGeek I found this video in Russian I believe in behalf of the Cronier Trimmer he swapped the blade kzbin.info/www/bejne/l3aXq6mchpesmtk

[@markmoney3650]

@CutswareGeek Question what would you do to boost a sc instinct clipper ? ​​⁠​​⁠

[@CutswareGeek]

You can't do boosting for SC Instinct, the clipper is good, going for a trimmer with the same motor as clipper is not a good idea. The trimmer gets noisy and fix is time intensive.

[@markmoney3650]

@@CutswareGeek what about battery

[@CutswareGeek]

@@markmoney3650 you can go for battery

[@Vegitobluuuuu]

Have you heard the new Saber 2.0 clipper with EON brushless motor it’s supposed to be a high end motor in that clipper but idk the difference between that EON thing and normal brushless motor if you have some info please share it thank you

[@CutswareGeek]

All things beside, $300? Why? 💀

[@Vegitobluuuuu]

@@CutswareGeek like I said they invested in this high end brushless motor called eon or whatever technology is behind it that’s why I asked you 😂 but yeah I would never pay $300 for a clipper

[@CutswareGeek]

@@Vegitobluuuuu you don't need a high-end brushless motor to build a good machine, there are much important things that you take care of...

[@Vegitobluuuuu]

@@CutswareGeek bro I’m not saying I need one I am asking if you know anything about that EON shit I would like someone like you to explain what is so special about that motor that justifies the price of the clipper

[@Vegitobluuuuu]

@@CutswareGeek if you don’t know anything about it then nvm

[@rodneybowman4515]

Have you worked on the TPOB play or XO clippers? They are super quiet.

[@CutswareGeek]

if i'm not wrong, both has ceramic dynamic blade with babyliss like pin-drive design, this is not always but usually a silent combo

[@rodneybowman4515]

@@CutswareGeek How would you rate them? I love them in comparison to my Stylecraft clippers...

[@CutswareGeek]

Stylecraft was bad on rotary, on vector and AC, it is hard for stylecraft to defend them. I prefer those clippers in compare to stylecraft...

[@unclero100]

Can you boost the andis master

[@CutswareGeek]

Andis know what he is doing, don't touch it :)

[@LBeeLilStoner]

👍🏾👍🏾