so you discontinue the pre runner fender flare kit for the ranger, then release a pre runner suspension kit?
@Bziiit.9 ай бұрын
This kit as the ability to turn a simple crawler into a cool and unique machine! Thank you Proline.
@toolbaggers8 ай бұрын
It's like cutting off your thumbs to be 'unique' like in the past. That's what removing 4wd and adding a non-double wishbone suspension is like....a regression to 1910's technology.
@Bziiit.8 ай бұрын
@@toolbaggers that's a very dumb remark. I bet you have blue hair.
@Crummieboi567 ай бұрын
@@toolbaggershave you ever thought of: not everything is for performance, some things are for fun.
@stevenmoreno74936 ай бұрын
Something are for fun and this my friend is a badass thing for fun 🤣🤣
@travistaylor81229 ай бұрын
This is one of my fav things proline has done, hope they come out with aluminum upgrade bits.
@DoubleClutchProductions9 ай бұрын
I wish people realized that metal is not an upgrade in this scale. The flexibility of this plastic is what will help these hold up
@max71436 ай бұрын
Have you watched the slow motion of these kits landing smh. The tires go 90* to the chassis. These are way too soft for anything but looking cool on a bookshelf.
@pinzgauerbelgium9 ай бұрын
I had a bronco with a superlift suspension....man that thing gives me good memory's.😅
@BPlus-oz7cm9 ай бұрын
This is rad Pro-Line, you guys are the best... now about that f-100 you know would look SO good!
@DoubleClutchProductions9 ай бұрын
Pretty dang stoked! Got two on order!
@speedy_0719 ай бұрын
I don't have an SCX10 but now I want to get one just to put that suspension kit on it 😭😭
@rodcognito0029 ай бұрын
I got 2 scx10s laying around. Make for some fun racing.
@moe2828 ай бұрын
Where can we get spare parts I already broke a beam?
@kevinmontgomery94758 ай бұрын
Not sure what everyone's experience is after the build but here is mine. In a straight line its awesome. Super top heavy and very unstable when turning. I used a 3300 kv puller pro and tried big 5000 mah packs and small 2200 packs without a noticeable difference. Rear swaybar did help some. Hoping to see some more in depth setup videos soon.
@magnetico63898 ай бұрын
Is there a sway bar??
@DoubleClutchProductions8 ай бұрын
It's going to take a lot more than this kit to get real performance out of these. The base is there but I think proline completely mist the concept while still achieving the goal. Although the TTB front end is well done they completely mist the points that make these trucks work propperlly. First mistake was using stock length shocks.
@Bingo_Bango_698 ай бұрын
That's because Pro-Line wants you to install the kit and then keep the truck on a shelf where it looks cool.
@DoubleClutchProductions8 ай бұрын
@@Bingo_Bango_69I personally can't stand the instagram style non functioning models. My personal rigs are built to use and built with real world respect to what makes these trucks special in real life.
@asty4188 ай бұрын
@@DoubleClutchProductions Im looking into one of these kits to turn my 10.2 into a prerunner, apart from longer shocks what else would you be changing or adding to this kit?
@TheSmokeStack9 ай бұрын
Now you too can know the joy of owning an 80's Ford truck! LOL! This is an awesome idea for a kit! Thanks for releasing this, and for adding another thing to my list to get. 😁
@johnathanfarquhar19819 ай бұрын
Most Baha race trucks use twin beam front suspention, because it gives you huge amount of travel in the front.
@TheSmokeStack8 ай бұрын
@@johnathanfarquhar1981 I know, but the downside to TTB is a constantly changing camber and tow. Not that big of a deal on a race truck, or RC car, but it's temperamental with tire wear on street driven trucks. Hence me making a crack on 80s Ford 1/2 and 3/4 ton truck owners. Like I said though. I like the kit and plan on using one to make a scale desert truck whenever my play money opens up.
@angrymelon9 ай бұрын
Is there a parts list for how to convert an original SCX10?
@TurboTaco2JZ9 ай бұрын
TTBs with a chevy body. Makes a lot of sense.
@MikesRCWorld9 ай бұрын
already got my project started! just waiting for the Beam kit to ship
@DisasterRC9 ай бұрын
find it funny that you used a chevy body for this when chevy never had a twin I beam suspension, yet proline makes a killer ford ranger body with prerunner rear fender flares that would actually have a twin i beam front. weird must not be truck guys making these things lol
@TrokaRC9 ай бұрын
Lol
@serrated139 ай бұрын
There are a lot of Chevy trucks with I beams. It's always been the least expensive way to get gobs of travel.
@PNWRIPPA9 ай бұрын
Yeah you can pretty much twin I beam anything and ford actually had a twin traction beam front end kinda independent/straight axle crossover. Never had a twin I beam, nothing did from factory.
@chazbeaumont659 ай бұрын
@@PNWRIPPAWhat would you call the front suspension used on Ford 2 wheel drive trucks from 65-90 then if not twin beam?
@MikesRCWorld9 ай бұрын
Beams have been swapped into Toyotas, Jeeps, Chevys ETC...
@JarrettLemke9 ай бұрын
That is a super cool kit. Ready to start seeing more bodies get released too. What bumper is that? Doesn't like oem Axial bumper.
@DoubleClutchProductions9 ай бұрын
Axial Hanco
@projects_on_wheels9 ай бұрын
Aye, that's so awesome. It's such a great looking kit and truck!! It's on my list of RC wants now ha
@r35tmanbash7 ай бұрын
Waiting on a 4x4 version of the beams. If it ever comes out. 😁
@FarmerFpv9 ай бұрын
That's sick! I did the same thing with my TRX4 sport using 3D-printed parts to produce the same look.
@alexanderpiedrahita16459 ай бұрын
I’ll be getting one for sure now
@MrPOTatoeHEAD7029 ай бұрын
WE NEED THE FLARED FENDERS IN STOCK !!! to go with the ranger body
@Bonurges8 ай бұрын
Agreed! AND the ranger body. Both are showing discontinued. We need bodies to fit this mod!
@julianburr18327 ай бұрын
crazy how we drop this as soon as they stop selling the 10 II builders kit
@MrJwsewell41 минут бұрын
Now give us the Twin Traction beam!
@Mtberforlife39 ай бұрын
Got mine ordered, waiting for it to ship. Not sure what body ill use on it
@benjaminpinney4936 ай бұрын
Any idea when this will be available again
@Bonurges8 ай бұрын
We need bodies that fit this setup. (Ideally proper period correct Fords). It’s wider than crawlers and narrower than sct
@DoubleClutchProductions3 ай бұрын
Agreed!
@StraitJacketRC8 ай бұрын
Wow! you guys made another video! That's like 4 this year 😂
@leehall31818 ай бұрын
Looks great . Can you all make some jeep Cherokee bodies from the early 70s. Also a ramcharger would be cool. Dont discontinue it so fast this time.
@fiveomagic88449 ай бұрын
Need a f-100 or ranger body
@Rockatha9 ай бұрын
When will this be available in the UK?
@creekcreeperrc79729 ай бұрын
Perfect for my 10.2 that I have nothing to do with
@DJArkum699 ай бұрын
I wonder if there's a way to marry this to the Element IFS system to give your prerunner 4wd?
@DoubleClutchProductions8 ай бұрын
Absolutely not lol!
@DJArkum698 ай бұрын
@@DoubleClutchProductions Now I feel promoted to figure out a way to
@max71436 ай бұрын
Good luck, both kits are very complicated. Also, look at 1:1 4WD TTB suspension, the pumpkin is mounted on one of the arms.
@DoubleClutchProductions8 ай бұрын
Pros, TTB, Cons, stock length shocks,no sway bar, rear battery is not actually over or behind the axle resulting in poor CG, the front shock towers flex terribly, almost all mounting holes are stripped after just a few mock up sessions. Did I mention stock length shocks. I dont think my beams will survive very long, my rear parts bag went straight into the trash too. What sucks is all this info is easily available, you have to work hard to not use it.
@johnroberts1.6rc826 ай бұрын
what servo do you recommend with this Twin I-Beam?
@CPRC237 ай бұрын
I'm curious how tough it would be to put in an scx10 iii. Blown my front output gears twice in a month, I would love to do this to my bronco
@jakewaters55638 ай бұрын
I really want them to come out with a ttb 4x4 version. Even better if they made it “full width” to match an ar60 rear axle.
@ed0c9 ай бұрын
looks awesome! please release a metal kit! would love you long time.
@calebhill24109 ай бұрын
This needs to be made for the udr
@CornholioMcGeeRC9 ай бұрын
That would be cool but they’d have to make sure to keep it 4 wheel drive!
@fiveomagic88449 ай бұрын
I agree, beams for a udr would be great!!
@DoubleClutchProductions9 ай бұрын
UDR owners Crack me up lol
@fiveomagic88449 ай бұрын
@@DoubleClutchProductions I don’t own a udr, but if I could put beams on it, I would buy one!
@zdattonejones670925 күн бұрын
They will
@JW-fq1ec9 ай бұрын
Is there any way to adjust the pinion angle on the rear axle?
@DoubleClutchProductions9 ай бұрын
You don't want to with a triangulated 4 link, pinion angle is designed to match the motor pinion angle as much as,possible or you get a wobble
@don600009 ай бұрын
Great job, Ian!
@mercerbeef2 ай бұрын
Why not make hex/axels like the Exotek eflite axels?
@johnmiller45539 ай бұрын
Kool stuff🤙🤙🤙🤙
@rykerthestryker7779 ай бұрын
Where can I get that bumper
@billzkustomz9 ай бұрын
It's a honcho bumper
@tankerboysabot13 күн бұрын
Does anyone know the outside measurement of the SCX10 frame rails.....I've seen 74mm, 76mm, and 78mm. I don't have an SCX10 but if anyone can answer this question, I want to get this kit but plan to make something unique.
@spoiler42ify8 ай бұрын
I REALLY dont undersrand how this fits an SCX10.1 with different servo location even using kits lile ssd or locked-up rc I dont see this as straightforward for the gen1.
@DoubleClutchProductions8 ай бұрын
Agreed!
@turbo779 ай бұрын
Now let's see a slowmo running vid
@DoubleClutchProductions9 ай бұрын
We all know this is a instagram non functional model lol. Sucks they glazed over the real functional side of converting these over
@kaylebrigger1259 ай бұрын
Would they be coming in metal sometime soon?
@century3219 ай бұрын
Anyone know what bumper that is?
@DoubleClutchProductions9 ай бұрын
Axial Hancho
@jaredalexander34038 ай бұрын
Haven’t used my scx10ii in years now it’s coming out of retirement soon as the kit gets here. What are you guys doing for more speed? Brushless system?
@paullayer41525 ай бұрын
Would this work on a vanquish or injora chassis work?
@bmleach8273 ай бұрын
Make a kit for the trx-4m
@brandonwymore95264 ай бұрын
How do you fix the steering acronym problem?
@DoubleClutchProductions3 ай бұрын
Zero degree knuckles with a physical stop at lock! 👊😎
@CornholioMcGeeRC9 ай бұрын
Wow great video on the how to. But would have been WAY better to actually see it run…. Just saying Now I gotta find a used cheap 10.2 to make this happen!!
@vincelemasurier74649 ай бұрын
That’s killer awesome job proline 🤌🏼
@NCMATT9 ай бұрын
Great job.
@zip-tieracing43079 ай бұрын
It’s called a drive cup silly 8 min in
@alejandromun64453 ай бұрын
Now we need one for the scx24 🫣😂
@djs01109 ай бұрын
How will this work on the original SCX10 when it has a axle mounted servo?
@billzkustomz9 ай бұрын
Have to use the scx10 2 servo mount
@billzkustomz9 ай бұрын
AX90059
@djs01109 ай бұрын
wouldn't the steering hubs be the wrong size as well?
@zephgage36949 ай бұрын
i have a scx10 1 and it does not have a chassis mounted servo what parts do i need to do this ?
@Bingo_Bango_699 ай бұрын
What about transmission and gearing???
@DoubleClutchProductions9 ай бұрын
I do think they glazed over the really important parts. They basically built an instagram non functional model for looks, mildly disappointing
@Bingo_Bango_699 ай бұрын
@@DoubleClutchProductions yeah super lazy of them. They even made a body for a non functioning truck. Gotta love it
@discovolante66248 ай бұрын
what are you talking about exactly? it has a transmission, also the gearing would depend on what motor and tyre diameter you use and what speed you want, if you can use a screwdriver you can experiment with gear ratios, its not hard
@Bingo_Bango_698 ай бұрын
@discovolante6624 the 2WD pre-runner suspension kit does not turn your Axial I and II into a functioning 2wd pre-runner, it just makes it look like a pre-runner. Pro-Line released this as a way to make your old and outdated crawlers look cool on the shelf.
@discovolante66248 ай бұрын
@@Bingo_Bango_69 i was responding to your "What about transmission and gearing???"
@Todd_G_FPV9 ай бұрын
Coukd this work on a trx4 with carbon injora chassis? I notice it has holes for 2 top links instead of one like the stock chassis
@TheZbikowski8 ай бұрын
Are the sliders needed for this? Or can this be done without them?
@charleshulsey31038 ай бұрын
Why would you want I beams in the first place? And why would you use anything but a Ford body with I beam chassis?
@DoubleClutchProductions3 ай бұрын
Look up I Beams and desert racing 👊
@MK-FreedomUSA8 ай бұрын
I need that bumper PROLINE! Please send it to me as a Christmas present. 🎁
@shaynejenkins4467 ай бұрын
Its an Axial bumper. Still available.
@MK-FreedomUSA7 ай бұрын
@@shaynejenkins446 Does it come with the plates? I only find parts tree listings
@BroncoCrawling9 ай бұрын
Will this work with the base camp kit
@neildaniels54439 ай бұрын
Why are those front knuckles so different to my one that came with my scx10 ii buikders kit? Does this mean it will not work with my builders kit?
@neildaniels54439 ай бұрын
Ignore me lol , I should've watched the whole video first 😊
@braedenne109 ай бұрын
Wondering if there would be a way to fit this kit to the wraith 1.9 or a Capra chassis
@Jeepy8420009 ай бұрын
Maybe a Wraith 1.9 with the Deadloc rail set 🤔
@evanforst72729 ай бұрын
Straight up thought this was a real rig build and I was kinda confused when he pulls out the small box lol.
@gregorholmes18379 ай бұрын
Seriously? No running video?
@CornholioMcGeeRC9 ай бұрын
Exactly!!!
@charlesbaril30389 ай бұрын
Exactly why I haven’t bought it yet, there is 0 videos of it running, neither from proline nor any other KZbinrs… As soon as there is a video, and if I’m happy with how it seems to perform, I’ll then probably buy at least one! I already bought a 10-2 for this project!
@joshc60809 ай бұрын
That rear pinion angle does not look happy 🧐
@DoubleClutchProductions9 ай бұрын
Explain further?
@joshc60809 ай бұрын
@@DoubleClutchProductions at 33:30 the pinion pointing at the ground. Not going to work well like that...
@fiveomagic88449 ай бұрын
Ford beams needs a ford body!
@joshuagregg75799 ай бұрын
Those aren’t “Ford” beams. They’re modeled after custom fabricated beams which people have installed on every kind of truck out there. And lots of people swapped beams into other makes. 🤦🏼♂️
@bobfeber10996 ай бұрын
Just hurry up and release more kit's
@blakedenley37929 ай бұрын
Horrible driveshaft angle
@DoubleClutchProductions9 ай бұрын
What is the correct angle?
@blakedenley37929 ай бұрын
@@DoubleClutchProductions take the time and look up proper driveshaft angle ;)
@william27669 ай бұрын
I am now going to be making a very very poor financial decision.
@Traxxbandit9 ай бұрын
First thing, why would you ever want to give up your front diff for 2 wheel drive. it is very stupid and makes no sense at all. Anyone who does has lost their stupid ding bat screw ball head. now for the second issue. you loose power and torque by dropping the drive shaft from the motor. there is no proper way to block that out put and keep it going back to the rear end. a failure at that point. at this point all you have now is a shelf queen. as well as an unusable truck
@DoubleClutchProductions9 ай бұрын
Man you clearly need to do some research. I got 4 of these builds two are 2wd. It's called overdrive with a inverse trans. These properly built and not built for I stagram are the real deal.
@tinapriest8578 ай бұрын
You recreated the worst suspension design Ford used.wow why would you do that.