Pro-Tools MB-105HD Tubing Bender Overview | Trick-Tools.com

  Рет қаралды 30,409

Trick-Tools.com

Trick-Tools.com

Күн бұрын

Пікірлер: 32
@Go4BrokeOffroad
@Go4BrokeOffroad 2 жыл бұрын
Been using my bender for 12 years now. Not a single issue. Love my oro-tools bender.
@georgehebb9806
@georgehebb9806 3 жыл бұрын
I like this Bender, I have searched for a good reliable bender but I have always been disappointed in how many steps just to bend a pipe. I saw how simple this one looked and it impressed me with its performance. I most definitely will be looking to purchase one in the future.
@rcclassiccrawlers4368
@rcclassiccrawlers4368 3 жыл бұрын
Good job with the video. Man! That air operated one is considerably slower than the electric one.
@reginaldobarros4669
@reginaldobarros4669 3 ай бұрын
Meus parabéns. Gostaria de adquirir o projeto!
@zod-engineering-welding
@zod-engineering-welding 2 жыл бұрын
Question about the die, if I may. I have a Woodward Fab WFB2 bender which has a very very similar layout. I'm looking at the pro-Tools die set for 1-1/4" pie die set on a 5" CLR because is a heck of a lot cheaper than the Woodward Fab version ($200 difference!). Would anyone be able to tell me the dimensions of the follower die, the pin diameter, and the radial distance from the curved die's center hole to the outer holes?
@TrickTools
@TrickTools 2 жыл бұрын
Can you email this question to Sales@trick-tools.com. One of our sales staff will be able to help you out with this.
@adamcannon6331
@adamcannon6331 8 ай бұрын
Does this bend .250"thick wall tube?
@luctessier2215
@luctessier2215 3 жыл бұрын
I noticed lube or grease on the tube. What do you recommend & should it be put on the die or follower?
@TrickTools
@TrickTools 3 жыл бұрын
We were using a water soluble bending lube that we sell, the link is below. The follower die is the main location for lubricant but it can also be helpful on the die. www.trick-tools.com/Trick_Tools_Bending_Lube_TC89_5594
@mohammadhaseeb7985
@mohammadhaseeb7985 3 жыл бұрын
Perfectly Explained ,,,, Can you tell, How much air flow (CFM) required to Air Pump
@mohammadhaseeb7985
@mohammadhaseeb7985 3 жыл бұрын
@Trick-Tools.com Pressure it needs 40-170 PSI but need to know air flow... Appreciate your response
@TrickTools
@TrickTools 3 жыл бұрын
Virtually any shop air compressor will run these. The manufacturer of the pump doesn't specify a CFM rating but in our experience, we have run them on very small compressors with success. I hope this helps. Feel free to call us or visit our website for more information.
@mohammadhaseeb7985
@mohammadhaseeb7985 3 жыл бұрын
@@TrickTools Great Appreciate your sprit Thanks a lot
@mohammadhaseeb7985
@mohammadhaseeb7985 3 жыл бұрын
@@TrickTools it's strange for me that manufacturers do not mention air consumption - cfm,,,,, which important info unless we search in operational manual
@TrickTools
@TrickTools 3 жыл бұрын
I think it's because the CFM isn't really that important on a pump like this, as it only runs for very short periods of time. thanks
@ryansaunders1837
@ryansaunders1837 3 жыл бұрын
Hey all, I am very green at this so please be easy on me for my next question. I have just got a pro 105 from a guy that when he sold it to me said he did not have time to figure it out. He told me the 14 " radius dies that came with it won't work for what I am doing with it which is building roll cage for rzr. I agreed said yes i will need a 7" radius die. He informed me it would not make it any tighter of a bend ...? Please help I don't understand how it would not make it a tighter bend ?
@TrickTools
@TrickTools 3 жыл бұрын
We would love to help you out. That could be done best if you call us up and have one of our staff get all of your questions answered. 1.877.VAN.SANT
@jonyovanno4145
@jonyovanno4145 4 жыл бұрын
Is this the same as Woodward Fab pro mb105? Are the dies interchangeable?
@TrickTools
@TrickTools 4 жыл бұрын
I believe woodward does sell the Pro-Tools bender as well. Here is a link to our Pro-Tools Store on our website. www.trick-tools.com/Pro-Tools-Store_840
@jonyovanno4145
@jonyovanno4145 4 жыл бұрын
@@TrickTools yes, but woodward has the HD degree wheel and free shipping.
@TrickTools
@TrickTools 4 жыл бұрын
Ours comes with the degree ring as well. as far as shipping is concerned woodward doesn't stock these benders so you are waiting 4-6 weeks minimum for it to ship from the manufacturer. In our experience Pro-Tools can often exceed that so you could be waiting 2 months to get one from them. Because of that we stock these benders in our warehouse and they can ship same day. we have extra money involved having them ready to go for customers so you don't have to wait and that is why we can't afford to eat the shipping cost. Our sales staff is extremely helpful and knowledgeable so you can call us anytime in the future for excellent customer service and tech support that can't be had anywhere else. Hope this helps and please reach out to us anytime.
@TrickTools
@TrickTools 4 жыл бұрын
www.trick-tools.com/Pro_Tools_MB_105HD_Heavy_Duty_Manual_Tubing_Bender_MB_105HD_5142
@SawyerMotorsports
@SawyerMotorsports 3 жыл бұрын
Any discount codes? I’m ready to buy one I think.
@TrickTools
@TrickTools 3 жыл бұрын
Unfortunately we don't do discount codes but fortunately we always keep our best prices out there for everyone.
@sunmarkportland
@sunmarkportland 4 жыл бұрын
Made in USA I presume?
@TrickTools
@TrickTools 4 жыл бұрын
Yes they are, right down in Florida.
@sunmarkportland
@sunmarkportland 4 жыл бұрын
@@TrickTools Perfect! Next tool I need you're on. No more crap from China...ever.
@TrickTools
@TrickTools 4 жыл бұрын
We do our best to source our tools from US manufacturers, but when we need the right tools to fill customer needs, we have tested and sourced great products from Europe, Australia, and even some from China. We show the country of origin on all of our products so that people can see that before purchase. We won't sell a tool if we don't believe in it. Thanks
@chasetoedter9185
@chasetoedter9185 4 жыл бұрын
If I go with the air/hydraulic setup. What size compressor do you recommend at what PSI?
@TrickTools
@TrickTools 4 жыл бұрын
The air pump operating rage is 40-170 psi so as long as your compressor can maintain around 90 psi for a minute or two it should be just fine. We have run it on small 20 gallon compressors and they will do it, you just may have to pause for a few seconds to let it catch up. If the compressor is bigger than that you should be good to go as normal
@JeepingMo
@JeepingMo 4 жыл бұрын
Good video. We are looking for a bender, we are starting a new fab dearies in our channel.
Baileigh RDB-250 Tubing Bender - Trick-Tools.com
14:48
Trick-Tools.com
Рет қаралды 52 М.
PRO TOOLS MB 105HD TUBING BENDER FROM TRICK TOOLS - ASSEMBLE - MOUNT - 1ST 90 DEGREE BEND
8:35
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 17 М.
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 12 МЛН
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 25 МЛН
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 144 МЛН
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 44 МЛН
TFS: Tube Bending Basics 1 - What You Need to Know
24:43
The Fabrication Series
Рет қаралды 2,8 МЛН
How to Use a Hand Tube Bender | Tech Tips | Swagelok [2020]
6:12
Swagelok
Рет қаралды 1,5 МЛН
Using the $209 Roll Cage Tube Bender from Amazon!
12:34
Trail Time
Рет қаралды 24 М.
MEGA SHOP ADDITIONS! PRO-TOOLS MANUAL TUBING BENDER
15:24
John Ludwick
Рет қаралды 1,9 М.
Introduction to Square Tube Bending @ Trick-Tools
7:32
Trick-Tools.com
Рет қаралды 1,9 МЛН
Building the Ultimate Budget Tube Bender
20:39
Busted Beaters
Рет қаралды 14 М.
Which Tubing Bender???
29:59
KJ Raycing
Рет қаралды 47 М.
Setting Up The Cheapest TUBE Bender From Amazon: Pt 1
12:28
Doug's Messy Garage
Рет қаралды 5 М.
My JD square model 32 tube bender
10:09
Skidmore’s Motorsport Garage
Рет қаралды 18 М.
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 12 МЛН