Problem on Design of Key - Design of Shafts, Keys and Couplings - Design of Machine

[@Ekeeda]

Hello Friends Watch complete video series of subject Design of Machine only on Ekeeda Application. Download Ekeeda application to get 1000 Studycoins and use it to access free courses. Steps to follow:- 1. Download Ekeeda application from the link given below. 2. Sign up or Log in to your account. 3. You will get 1000 Studycoins worth Rs 1000. 4. Add the courses to your cart. 5. Select Study coins option to get free access. Android App : play.google.com/store/apps/details/?id=student.ekeeda.com.ekeeda_student iOS App : apps.apple.com/in/app/ekeeda/id1442131224

[@kanishkrauthan2470]

For the doubt of why length = 1.25d, this is because, it is a condition that the key cannot be greater than 1.25 times the diameter, so we assumed it to be equal to that and followed with the calcs.

[@sachinsingh1237]

Can we use 1.25 in every question??? Plss tell

[@kanishkrauthan2470]

@@sachinsingh1237 I believe if its not specified you can.

[@atulsharma6823]

It was supposed that 1.25 of d , you can consider whatever value but a legitimate value .

[@Duniya-Al-Noor]

sir for rectangular key w = d/4 and t = d/6 as per textbook of machine design by r.s. khurmi.....what is your point of view about this ??? waiting for your answer

[@muhammadahsanjameel143]

w=d/4 is for square key

[@sudhanshushrirajendra4809]

d/4 is used in square key and d/6 is used for rectangular key

[@prashantyelpale8140]

I think the correct procedure is .you have to find the dimensions using calculation of stress and then compare with standard dimensions of proportion and take the maximum value for safeness.

[@weslymlilo5837]

this is one of the reasons why I love the comment section, because I saw this on the textbook as well and now I'm confused

[@kelumo7981]

super great work sir,I will be coming often to this channel until I complete my degree

[@asim_rajak]

Thank you sir for providing this video. Right now my all doubt is clear.

[@asifarif659]

A steel shaft has a diameter of 25 mm. The shaft rotates at a speed of 600 r.p.m. and transmits 30 kW through a gear. The tensile and yield strength of the material of shaft are 650 MPa and 353 MPa respectively. Taking a factor of safety 3, select a suitable key for the gear. Assume that the key and shaft are made of the same mater

[@faiz3094]

find the length of square key size d/4 such that the shaft and the key are made up of same material Answer please

[@iamchandrasekharreddy2294]

Sir the crushing stress is applied on total thickness of the key but why we consider it as t/2.

[@avanindra_AJ]

Thickness is divided two parts t/2

[@prithvic5468]

The effective area being crushed is only half the thickness (quarter from top LHs, quarter from bottom RHS = half)

[@vatsalparikh633]

Thank you for this amazzing explanation

[@Ekeeda]

Hello Thank you for your valuable feedback. Complete video lectures of Design of Machine is available on Ekeeda Application. Download Ekeeda application to get 1000 Studycoins and use it to access free courses. Steps to follow:- 1. Download Ekeeda application from the link given below. 2. Sign up or Log in to your account. 3. You will get 1000 Studycoins worth Rs 1000. 4. Add the courses to your cart. 5. Select Study coins option to get free access. Android App : play.google.com/store/apps/details/?id=student.ekeeda.com.ekeeda_student iOS App : apps.apple.com/in/app/ekeeda/id1442131224

[@narendrachowdarypenumarti303]

Sir can you explain me the reason behind the length of the shaft = 1.25d ?

[@Ekeeda]

narendrachowdary penumarti We recorded your response. We will Come back to you shortly. Stay tuned with ekeeda channel for more videos. narendrachowdary penumarti we request you to share our work with your friends and family. BECAUSE YOUR LOVE GIVES US POWER TO PRODUCE MORE AND MORE GOOD CONTENT TO SPREAD THE QUALITY FREE EDUCATION. You can Subscribe by clicking on below link kzbin.info narendrachowdary penumarti you can Help Us to Improve our Service. #narendrachowdary penumarti #Ekeeda #YourVirtualTeacher #LoveEducaion #OnlineLectures For more Educational Information or to Ask Question to #SubjectExpert Visit ekeeda.com You can also provide us Financial Help to continue this good work www.patreon.com/ekeeda

[@diwakarravi3355]

You can use the design data handbook which gives the emperical formula that ensures safety. By convention the length of the key is usually taken based on the diameter of the shaft as mentioned in the design data handbook in that, length is 1.25d

[@hardik7090]

thanks. i forgot about the databook

[@sitaramgarg690]

For rectangular key, L= 1.25d

[@godugubharathkumar4007]

@@sitaramgarg690 But Data hand book is not allowed to examhall😓

[@PERIYANAYAGI6199]

very important question for torsion Anna university exam

[@Ekeeda]

Yes it is very important.

[@Happyvlogs89]

Width is less than the thickness , but u said for rectangular key width should be greater than thickness, can anyone plz help me

[@jaibabapuranjijaibabapuran7678]

hllo sir calculate ve naal kro plz answer na likho sidda plz kyu ke mere answer aunda ni thunda wale numerical da plz vo batna plz vasse lecture bht vdia. good luck

[@sksaurabh8294]

Length of key =1.25d not shaft length

[@zikken5576]

Good morning sir. How do you get the 1.25

[@prashantyelpale8140]

lovely.

[@Ekeeda]

We are happy that our content is helpful to you and it motivates us to keep focusing on the content. Download Ekeeda App where you will get courses with all the concepts from basics, practice problems and doubt asking facility from top educators. Download App - ekeeda.com/download.html

[@prasadmanish2813]

Excellent Sir

[@Ekeeda]

Thank you for your words! Ekeeda provides online engineering lectures which are availabe on our website at affordable prices just visit our website- ekeeda.com/ you can also download our app for free! For iOS- - itunes.apple.com/tt/app/ekeeda/id1442131224?mt=8&ign-mpt=uo%3D2 For Android- play.google.com/store/apps/details?id=student.ekeeda.com.ekeeda_student Thank you!

[@basicstoengineering6233]

wrong length and thickness is determined, As t=10mm & l=117.7 refer RS KHURMI

[@يوسفحماد-ق5ب]

thanks for your help.

[@venuunnam8977]

sir standARD KEY CROSS SECTIONS ALREADY AVAILABLE so why need to the finding width and thickness

[@Ekeeda]

venu unnam We recorded your response. We will Come back to you shortly. Stay tuned with ekeeda channel for more videos. venu unnam we request you to share our work with your friends and family. BECAUSE YOUR LOVE GIVES US POWER TO PRODUCE MORE AND MORE GOOD CONTENT TO SPREAD THE QUALITY FREE EDUCATION. You can Subscribe by clicking on below link kzbin.info venu unnam you can Help Us to Improve our Service. #venu unnam #Ekeeda #YourVirtualTeacher #LoveEducaion #OnlineLectures For more Educational Information or to Ask Question to #SubjectExpert Visit ekeeda.com You can also provide us Financial Help to continue this good work www.patreon.com/ekeeda

[@smartgift5749]

Design a key for fixing a gear to a shaft dia 25 mm KW of power at 720 rpm is transmitted from the shaft to the gear .The key is made up of steel 50C4.the yeild strength in compression can be assumed to be equal to the yield strength in tension

[@vireshpatil3469]

Thank you sirji

[@vaibhavsinhjadav5418]

great work sir....for making our problem easy and helpful....

[@mayukhchatterjee10]

How crushing area is taken?

[@MukeshSharma-rb4do]

alot of confusions why did you take shear stress for shaft and key same while it is not stated in problem and crushing area that you have taken is that of only one face why? while when the crushing force will be applied both the side faces will come into contact plz clear my concept as soon as possible

[@animeshjana6761]

Plz tell the reason for each step

[@r-hit4209]

Sir please jo bhi videos design of machine Ko aapne chupa ke Rakha hai use bhi open karo samjhta nhi hai ek dekhne ke bad dusra AAP chupa lie ho to doubt hota hai. I hope ki use bhi public karoge.

[@shikharwadhwa7458]

great lectures

[@Ekeeda]

Thanks for watching, stay tuned for more videos. We request you to share our work with your friends and family.

[@phongvong5470]

Can you believe that someone has accused me of murdering with one key? I am not that stupid. Why? The Definition!

[@shivamsingh-dq1wb]

Sir ..volume problem

[@vijaygound349]

In my text book ans of W=6.91 and l = 142mm Tech max book

[@3AMGtv]

In one of ur lectures u said l= 1.5×d

[@KoreanremixStatues]

Your voice is not audible... Please speak loudly 🙏🙏🙏🙏🙏

[@abduldiallo5571]

Hello sir i am interested in designing machine elements for a machine we are trying to build. We will like to work with you

[@TheHelado36]

Why not avoid keys in the first place! They are the weakest point in the design! Why not make a coupling system or like a shaft connects to a hub type of design ?

[@AKASHSHARMA-fq9en]

Length direct hi 1.25l kyu li h

[@AdarshFun]

it is standard that length is 1.25d

[@رياضالحمودي-ط6ش]

I found on some books L=1.5d

[@RohitSingh-co5qz]

4.1

[@umairrahman2117]

Sir voice is too low