Proboat Miss Geico 36 Twin 6s and hits dock🤬

[@stefanlangheden]

Break the rudder or break the hull, that is the question... Awsome boat, i have the same colour on my NTN600 but that is the only similairity 🙂

[@mikehagquist5198]

Miss gieco has to the best looking cat

[@IRONCLADRC]

Oh man. Looks like I'm not the only one patching holes in the Hull. She was running nice till that rubber pin broke. Tough break brother

[@mildtowildrc7343]

Yep and looking at the damage and will take me a couple hours to fix that and match paint back up🤬Was fun day though and just something else to tinker on👍

[@teslacybertruck750]

I love the boat sir, thanks for sharing..

[@mildtowildrc7343]

I will have her out soon as the water looks nice again here.Lots of floating debri now in my run spots.Have upgrades coming on her as well👍

[@rddowler211]

Awsome boat. They need to make it so the rudder doesnt come completely out of the water so you can still get it back to you. Hope you get her back in the water. Maybe a gps high speed pass would be amazing.

[@mildtowildrc7343]

Fixed it the same weekend and will be gettin out doin more videos 👍Have several new projects to put up and will get a gps run on this and my UL-19 I totally reworked inside with Spektrum technology👀

[@mustangcircut]

Tough break. I’m doing a small repair on my geico that I just got. It was a shelf queen but if must have gotten bumped on the sponson where it meets the deck. Hairline crack I’m going to epoxy. I saw you said you matched paint. I went to the web and house of kolors has chartuse green neon which I’ll be able to airbrush. What concoction did you use?? Thanks.

[@mildtowildrc7343]

I used a rattle can of neon green I found that was super close and gonna repaint mine soon.Have never liked the bikini Lizard,but the color makes it easy to keep up with in the water👍Just getting myself motivated and working on others right now.New runs coming

[@mustangcircut]

Ok thanks for the fast response!! I’ll see what it looks like when I get the bottle. I’ll do a test run on paper and see. lol you don’t like the lizard🤣

[@olieboll3675]

If you have flex shafts i would not recommend driving backwards because overtime the flexshaft unravels its self, and dont drive to much half trottle puts load on the esc and not loads of cooling so it will blow

[@mildtowildrc7343]

Always set your reverse to 20% and run HD flex drives if you want to keep your expensive props👍Great point about the flexshafts,and most don’t know they are directionally made.Also have upgraded cooling and recommend on any boat using one pickup to feed esc and motor.Always feed a separate cooling pickup for each.

[@olieboll3675]

@@mildtowildrc7343 on my twin cats i always run left and right flex shafts cut them to size then hard solder the ends, always have my revers turned off dont need it, and of course good cooling

[@scottbuck9348]

Don’t feel bad, my UL-19 ran out of range last year wide open and ran all the way across the lake and smashed into a dock at 60 mph . Complete lost. Think I’m going to buy a small outrigger and put all the electronics into it. I’m a futaba guy when it comes to my helicopters and jets but I haven’t found a good water proof futaba receiver. Not a big fan of specktrum to be honest

[@mildtowildrc7343]

Take a look at the Wild UL-19 I put together with 160amp Spektrum and fast as hell.

[@mildtowildrc7343]

I didn’t run out of range and haven’t yet with the new DX5.Sheared the plastic rudder screw and had no steering👀

[@mikehagquist5198]

Didn’t even look like a hard hit. Horizon and the thin fiberglass. Beautiful boat though. Just needs reinforcement in areas

[@mildtowildrc7343]

Nothing to do with the fiberglass and the boat is thick🤨It had 4 battery’s in it and the reinforcement was done before speed runs.Better put pour foam in all seams before running high speed with 4 battery’s 👍

[@sirnotguilty9308]

That happen with my recoil 2 (shreddy) right out the box 2 minutes into using it. Sheared the screw right in half that holds the rudder

[@mildtowildrc7343]

I’ve redesigned the rudder to work like the Oxidean marine rudder and can just use stainless screw.Notched the rudder and eliminate the plastic screw

[@MrMad2424]

Sucks the rudder breakaway broke. But luckily not much damage. Keep ripping bro!

[@mildtowildrc7343]

Won’t be the last time it happens I’m sure.Need some brass screws instead of nylon.

[@FLSharkdiver]

@@mildtowildrc7343 no you don't want them to be brass, they are supposed to be made out of plastics so they give.. Plus, if you want to stop hopping, I would strongly recommend running all 4 3s packs in the front of your hull and you will see a big difference. See my last video that I posted on my channel.

[@mildtowildrc7343]

@@FLSharkdiver the battery’s are in the front and those are not stock props😏This was the first run with these props however.Brass shears and is better than nylon for 90+ mph

[@troyreiswig4826]

I have the black Sonic with that SAME decal kit! lol

[@mildtowildrc7343]

Take a closer look and see totally upgraded fins and cooling as well as balanced and sharpen prop👍❤️Love that boat!

[@ianmorhous9997]

Been the Rutter downwards and I will fix it

[@mildtowildrc7343]

I’m actually notching the rudder like Oxidean marine rudders are made and doing away with the plastic screw and just going to a smaller stainless til brass one is available again👍

[@Ec130Rhine]

U need to move the battery up more to the front

[@mildtowildrc7343]

There are four battery’s in it and no problem with center of gravity just need a brass breakaway.She runs hard enough to shear the plastic screw😂

[@mahesapemuda6750]

👍

[@naveda08]

Thats how i run mine with 4 3s batts. People are gonna bitch about the 12s title like they bitched about my 24s Genesis 56inch title. Best set up for weight distribution

[@mildtowildrc7343]

You are so right 👍

[@pcooper985]

It would be 12s if all 4 batteries were feeding into one esc in series. It's 6s to each esc.. That boat couldn't handle 12 s. The Motors and ESC's would burn up. 🤣🤣

[@naveda08]

@@pcooper985 You'd be surprised how many people do not understand that twin 6s needs 12s worth of batteries to run. Believe me I sell I lot of boats, like this 12s Genesis cat kzbin.info/www/bejne/mJLLeoympJWUZ6c needs 24s worth of batts and a lot of customers get confused

[@BlueTA01]

What remote do you use ? Does it have good range ?

[@mildtowildrc7343]

Spektrum DX5C and has excellent range and telemetry built in new ESC’s and battery’s 👍❤️

[@georgem.6136]

Ouch!

[@mildtowildrc7343]

Was an easy fix but scary when it hit the dock😫

[@mikehagquist5198]

Need to make a miss 48

[@mildtowildrc7343]

Can’t get hulls right now and wanting to make a Rockstar 48 electric

[@Wanted1069]

You hit a fish or a turtle.. It happens...🤷‍♂️

[@troyreiswig4826]

Wait .. is that a Sonic with a decal kit?

[@RChobbiespro]

how long is the run time

[@mildtowildrc7343]

I get about 10-12 minutes of run time if I’m pushing it hard👍

[@Mushroomyyt9112]

Couldn’t you have slowly reversed instead of turning to at least stop it from crashing in the dock?

[@mildtowildrc7343]

The video doesn’t really show how fast it was moving and reverse will destroy flexshafts and result in lose of props.

[@Mushroomyyt9112]

@@mildtowildrc7343 woah really?! I never knew thanks 😊 Even slowly ?

[@Aceb_k]

Feel like that was karma for driving a boat like that

[@mildtowildrc7343]

Jealous are we😂

[@Aceb_k]

@@mildtowildrc7343 Nah bro, you got a nice boat and a lot pf power. I just wouldn’t come in that fast, anything could happen.

[@mildtowildrc7343]

That’s true and wasn’t coming in just driving and even a fish in the water can damage these and has happened before with my Impulse 32 in a video when I flipped it on 8s.had a bent turn fin from the collision with the fish 😬

[@The_K_Project]

Note it's extremely dangerous to not turn your transmitter off first before lifting the hull out on the transom end.

[@nomusicrc]

Does this run 12s or is it two 6s in parallel

[@mildtowildrc7343]

I run duel 3s in series for.each esc and really fast and fun👍4 battery’s

[@nomusicrc]

@@mildtowildrc7343 so dual 3s to each ESC I can't believe there's enough room for that

[@mildtowildrc7343]

This boat has room my friend!Those are 5000mah 100c 3s in series for each esc and needs it to keep it in the water at high speeds🏁

[@larryguest6468]

The Boat is not 12s it is 6s. You should make that clear 6s per ESC and per motor.

[@mildtowildrc7343]

It’s a dual 6s boat still 12s total!Its also a 4 battery setup in the boat for the longest runtime.

[@scaleaddicted]

@@mildtowildrc7343 Sorry, but the number of cells, means, how they are connected! 12S are 45Volts, if they are connected RIGHT. In SERIES!!! The stock ESC would catch fire, ore even don`t get activated, if connect to 45Volts...you have 2x6Sx2 each in PARALLEL. For more runtime, but Not more voltage!!! You have to carry more weight, wich is not efficient.

[@mildtowildrc7343]

I’m running 2(5000mah 3s) in series on each for longer runtime and the weight is needed with the setup.Smart battery’s are lighter and this boat is over powered anyway on 6s with the props👍I have any plug for this to run different setups and props. I could write a book on voltage and amperage,as it pertains to energy . The KV has to be so low on a 12 s in a boat and you still have to use a huge prop to control the RPM’s that would be out of range if you don’t know what your doing for any brushless motor made🕵️‍♀️I’m not making anything off these videos and it’s a twin 6s boat and not the first to list it like this as 12s👍

[@jakekingry4391]

Damn brother

[@mildtowildrc7343]

No big deal just one of those things that happens😁Fixed already👍

[@kevinsimonsen2190]

it is a good idea to use a metal screw. those in plastic are not strong enough

[@mildtowildrc7343]

I am actually going to a brass shear screw that will handle the issue👍But I did drill the one on my impulse to use the larger ones that are used on the Sonicwake 36.They seem to stand up much better that the smaller ones on the MG36,impulse32&UL-19.Supply’s are down and learned to use brass screws or aluminum and just make em a little longer.So they are easy to get out when broken.

[@Triplethreatindustries]

Dude that sucks . Fix that bad boy and get back to ripping.

[@mildtowildrc7343]

Already fixed and had just been pour foamed before the run so really small damage👍My son just got out for summer break and we will be getting some more videos out🏁

[@javigarcia3450]

Madre de dios, hay que TONTO, pero no pa un rato no, TONTO PA SIEMPREEEEEEE

[@PigglyWigglyDeluxe]

12S is misleading I really don’t like how people keep saying the motors run on 50 volts.

[@mildtowildrc7343]

Show me where I said they run on 50volts😂This boat is twin esc and motors at 6s and sorry that a four battery set up is confusing.if you add all four battery’s instead of 2 battery’s like most use in this boat😬Show me a 36” boat on 50volts and I’ll watch it flip with you😂This one does 98mph with this set up and still have plenty of room for more..Speed runs coming and these motors will handle 8s all day.Check out my custom UL-19👀

[@PigglyWigglyDeluxe]

@@mildtowildrc7343 in your post title, genius. “Proboat Miss Geico 36 on 12s and hits dock” I have one of these too and a UL19 as well… and an Impulse 32 and a BJ24 and a powerboat 17. I don’t need to see other boats. I just thought based on your click baity post title that you ACTUALLY had a MG36 with 50 volts, which I’d love to see. Chill with the emojis, you look silly.

[@mildtowildrc7343]

Your the one that looks silly and it’s not click bait when your a hobbyist and not begging for anyones veiws so take a hike🖕

[@mildtowildrc7343]

Go back and make some videos and maybe you will get some more subscribers

[@MrRacingJake]

@@PigglyWigglyDeluxe Agreed, 12 S means 12 cells in series which equals 50.4 VDC at 4.20 volts on each cell.

[@jethganuelas4096]

🤦🏽‍♂️

[@Caden-editz]

It’s supposed to be 6S not 12 S

[@mildtowildrc7343]

It’s a dual 3s 5000 on each esc for a total of 12s😂Dual 6s still👍

[@mickeylocklear783]

Really it is 12 , he has four 3 s batteries. 2 batteries are run in series which totals 6 s to one esc. He has it set up the same on the other esc. . Technically it’s 6s to each times to equals 12s. If you don’t unplug the harnes that comes in the boat from the esc. Then he would be running 12 s through the boat, because the esc’ s are wired in series also. So that would burn them up. Just take the harness out and then you run the two 3 s batteries in series to each esc and you will be set up right. I hope I didn’t confuse the gentleman. I meant for this message to go to Mr Caden

[@mildtowildrc7343]

Correct and perfect setup for this boat!Weight is distributed evenly and longer run times👍

[@jaycevessier7554]

12s to each motor?

[@mildtowildrc7343]

No a pair of 3s in series for each.

[@jaycevessier7554]

@@mildtowildrc7343 well then you’re just running 6s

[@mildtowildrc7343]

Did you really think I would hook up 12s to a 6 s boat😂

[@jaycevessier7554]

@@mildtowildrc7343 I’ve seen dumber things in my time lol

[@mildtowildrc7343]

I seen Droneman did that by accident and blew the ESC’s before he even got it in the water😂And By the way ProBoat covered it and replaced them🤔When I speak of 12s it is the setup of 4(3s5000) not 2 packs.The boat is faster and runs longer on this setup.

[@VelocityKings]

This is 6s not 12s.

[@mildtowildrc7343]

This is dual 6s😂

[@RChobbiespro]

this held the camera while his dad had fun

[@mildtowildrc7343]

Sorry but he won’t even drive this one 😂He will tell you it’s to fast for him🕵️‍♀️He had plenty of fun and has a MG29 that’s almost this fast😬

[@LosDoyerss]

That thing needs some weights, way too much bounce on the water.

[@mildtowildrc7343]

😂It has 4 battery’s in it and it will lift at slower speeds when you have it set up right and has to plant down!This does 96mph like this😂

[@jordancoleman2402]

Should get some tips from iron clad, looks slow

[@mildtowildrc7343]

You a gps😂She is fast ass hell and still fine now👍I don’t need any tips and not tryin to break boats every run💩

[@mildtowildrc7343]

Go get some tips from my videos maybe get some subscriber’s 👍

[@larryguest6468]

And I only hear 6 beeps that’s still 6s. 6s boat all day long

[@mildtowildrc7343]

And still 2 ESC’s and motors😂

[@mildtowildrc7343]

This won’t get you subscribers😂

[@ANDREACHICCA]

Why you don go to 170 kmh like the other genius? 😂😂

[@mildtowildrc7343]

Speed is easy😂Stability and fun is what I am about.Not sure if that’s what your saying,the boat goes 90+mph easy and had that silly plastic screw to sheer off..And 170kmh is slow😏

[@mildtowildrc7343]

We are pretty smart to make em go this fast and actually get views and subscribers😂

[@michaeljohnson254]

Too much torq lol use nylon bolts dont be fool use attenna tube like someone I won't mention cough ironclad cough....nylon bolts hardware store 30 cents...was it worth it lol

[@mildtowildrc7343]

I have brass screws for higher torque and cough I know big b I am one of his many subscribers and he is one of mine

[@michaeljohnson254]

@@mildtowildrc7343 its funny you think its torq its just sheer water pressure from that speed.....and nylon works perfect

[@mildtowildrc7343]

No actually I hit something under the water and the evidence was on the bottom of the boat🤓

[@mildtowildrc7343]

The boat is fine and I never recommend plastic anything on RC boats.

[@mustangcircut]

Correction on my previous post this is what I got. NEON-CHARTREUSE-HOUSE-OF-KOLOR-KUSTOM.