Washing Machine Won't Stop Filling With Water - Easy Fix!

[@justinfoster2882]

Too bad most KZbinrs aren’t this clear and concise. Good work and God Bless you too.

[@MelissaStepherson]

Amen!!!!!!

[@exavierligon2037]

You are a lifesaver… I followed your instructions and now my washer works… thank you a lot you save me 💰💰

[@proclaimliberty2000]

👍😃

[@Reacts2Reacts]

Thank you for this, you saved a washing machine that was heading for the dump! Well done video as well.

[@joshuatingle4288]

Thank you for saving me money! I have a whirlpool washer that would fill all the way up even if I set it to small. Then immediately it would drain after filling all the way. Turns out the pressure control switch hose was not connected at all. Connected it up and it works great again 🎉

[@regularguychannel2967]

This was the best video on the topic. Very clear and concise. Great troubleshooting. I fixed my moms washer with this method. I went through the whole series and ended up having to replace the valve. Fixed the issue.

[@proclaimliberty2000]

RegularGuy Channel 👍😊

[@mistyize]

Bless you, sir. Lol I just had this happen in my washer, and my husband works crazy long hours. He just replaced the belt in it, and the very first load flooded my washroom. 😅 I'm betting he knocked something loose. I believe I can fix this myself, with this excellent video, so as to relieve the stress on him. I refuse to get a new washer, because I love my old tried and true, and we've had it for YEARS. Thanks to you, I can keep it up and running!

[@hamzamalik7263]

Brother loved your tutorial. Just fixed my washing machine. Bundle of thanks.

[@franchesca2866]

Thank you SO much, my boyfriend was convinced we had to buy a new washer but the hose was just disconnected. The video was clear and to the point, loved that!

[@proclaimliberty2000]

👍😊

[@aaronweatherson4379]

...all that in 3 1/2 minutes - NICELY DONE, Sir!

[@Guywithcrazyideas]

I really like your short, yet informative, videos.

[@proclaimliberty2000]

Guywithcrazyideas Thanks! 😊

[@DaFiresMen]

You just saved me a lot of money. Thank you.

[@noeldmello936]

Great stuff, saw your video & 30 minutes later my washer was up and running... 👍 Saved me time and a lot of 💰💰 on a technician who I'm sure would make it sound like he did a lot!! Cheers bud

[@proclaimliberty2000]

👍😊

[@abbagogogo]

EXCELLENT. Very detailed but easy to follow. Everything possible covered. Thanks

[@proclaimliberty2000]

abbagogogo 👍😊

[@bmbrth1]

Thank you! Tech stupid here, seriously i can't fix anything but I got my water to stop overflowing :) was a pinched pressure hose.

[@johnbargholzsr6508]

Thank You, You are a Great Explainer, simple and to the Point. This is the best video I have seen on this subject matter!

[@proclaimliberty2000]

👍😊

[@JessicaHunter-x6g]

This is the best troubleshooting video I've ever watched. Thank you sir I love how you went through step by step by step on what to check with no bullshit just straight to the point. Thank you very much and I will be subscribing to your channel

[@proclaimliberty2000]

👍😃

[@queenallie5786]

Omg thank you your a life saver 💞

[@tikiweshe]

Hi thank you for the video, my washer is having this problem ... Could this happen if there's is a tear or break in the hose???

[@proclaimliberty2000]

Yes

[@literailly]

My hose was dirty/restricted. Thank you, kind sir.

[@MaskUp1]

Thank you, saved me tons of time and trouble!!

[@proclaimliberty2000]

👍😃

[@robertmarkle5370]

Thanks! made for a $13 repair.

[@rayhewitt4688]

Thank you, sir.That was my problem.I really appreciate it

[@proclaimliberty2000]

@@rayhewitt4688 👍😃

[@MelissaStepherson]

God bless you!!!! Thank you!!!!🙏🏼🙏🏼🙏🏼🙏🏼

[@random_eskimo_in_the_rockies]

You name your channel "Proclaim Liberty" and you end your video wishing God's blessings on your viewers. I'm so glad there are still good people in this country today.

[@random_eskimo_in_the_rockies]

By the way, yes, I clicked like, yes, I subscribed. Obviously yes, I commented.

[@redcrosw]

Go eat some dry rice no body cares

[@DDubb007]

I concur. From one dog to another.

[@kaleboughton4986]

Most the articles on this say check this and that. We moved ours to a detached garage. MAKE SURE YOUR WASHER DRAIN IS ABOVE THE HIGHEST WATER LEVEL IN THE WASHER TUB!

[@rickrecco143]

Got it fixed. Thank You

[@proclaimliberty2000]

👍😊

[@biddermon]

Thank you. Luckily, my problem was easy. The hose had worked it's way off the sensor, so I put it back on and added a clamp.

[@Neighborhoodgo2guy]

Very Helpful ✊

[@jjfarm9562]

Thanks

[@BRYCESK8S]

Thank you for this informative video! You may have saved my relationship 😂

[@reptar1098]

I have a new inlet valve in mine. If it is still overflowing, after ive done these other steps. What next?

[@biggerdoggtransports5956]

Great video man 😊

[@proclaimliberty2000]

👍😃

[@joemercieca4794]

First of all l live in Australia. So any answer provided would probably need to be generic. I would give these repairs a shot, but if an average person requires parts where do they obtain them from?

[@proclaimliberty2000]

Joe Mercieca Hi Joe, I would love to try and help you. Is your washing machine overfilling?

[@joemercieca4794]

@@proclaimliberty2000 Thank you very much for the offer of help. Very kind of you. My question is however hypothetical at the moment. I try to keep abreast of things so that when things inevitably do happen with my old washing machine l have an understanding of what is going on. I have, never contemplated fixing a washing machine because unlike cars l would have no idea of where to source parts. Even a simple repair may not be possible. Hence my question PS: l have stored this clip in the KZbin library for future reference 😊

[@proclaimliberty2000]

Joe Mercieca do you know other people that try to fix things on their own? Maybe you could ask them where they get their parts.

[@joemercieca4794]

@@proclaimliberty2000 l do for cars, plumbing etc and around the house. Washing machines though, people always seem to leave it to a repair person or just buy another one.

[@suleymandemiray5770]

thanks very much.

[@proclaimliberty2000]

👍😃

[@chelsea2201]

Thanks dude. This fixed our problem:-)

[@ronb6182]

That's good and dandy but I don't have the option to spin the water out because my machine is coin operated but I will try the pressure switch.. I just pulled one wire on the pressure switch and the machine continued to run through the cycle. I have a feeling the switch is bad even though it clicks. The hose I blew through I heard water bubbling so I assume the hose isn't clogged also when I did a few loads earlier the wash water didn't completely empty I'm beginning to think the switch has issues. I going to order another one and replace it. This machine has never been put into service and was stored for many years. I need to learn how to service the machine because it's too expensive to call as someone. 73

[@sandraacosta2617]

Thanks dude

[@saltlifegull4091]

HELP! I'm old and can't reach the electric cord in the back. Can I try doing this without unplugging? Great video:)))

[@Brokebanger]

my homie had this happen to his, except he put in the load and then left the house so when he came home (an hour later). there was a lot of water totaling his mobile home

[@rachidziadi5050]

Thanks good job.

[@proclaimliberty2000]

👍😊

[@itechhen]

I got a new Comfee portable automatic washer that will not fill. The seller wanted me to send the unit back but later decided to issue a refund, yet I still have a brand new machine that will not work so I'd like to get it fixed so I can use the darn thing. Water pressure is fine but I'm a bit reluctant on trying to disassemble the unit. The entire housing is all plastic and cracked in a few places. If i am able to derive to the actual reason for failure, how do i get parts?

[@proclaimliberty2000]

repairclinic.com

[@ss-tk4wt]

I've pinpointed the problem from your info great It's in the hose leading back to the hose 1st mouse made a nest around it , and ate a couple of holes into it Then I cut out that out and added a section in between Blew into the hose and can hear water Trying to make a long story short I have it working but the problem is, this must be a vacuum of sorts It won't work unless I blow into the hose section , bend the hose to prevent leakage and rush to hook to section of hose off the switch It runs for a bit and then I have to repeat it What am I looking for to get it working probably After I get that , I'll give you a up vote

[@lindajones8481]

Question... our washer is not overflowing but the water fills/sprays in at all times... even during spin cycles. The agitator also moves during the initial fill cycle. Kenmore Elite. Could the fixes here help that?

[@proclaimliberty2000]

Yes

[@sirrahnad]

I will check mine

[@lucasbuch4696]

No idea if you are still active but the issue is the water will not stop during the wash cycle, all the other cycles work fine but throughout the whole wash cycle it continues to fill up with water but in the later cycles when it drains the old water and adds new water in to soak it stops on its own, any suggestions? Thanks.

[@proclaimliberty2000]

You probably have a bad water inlet valve. You could purchase one from repairclinic.com and if it doesn’t fix the problem send it back for a full refund.

[@shellywalker3013]

I have resolved that the issue is with the valve but am having a difficult time removing the wired connectors on the valve. I tried pulling them out but they are not disconnecting. How do I get them to disconnect?

[@proclaimliberty2000]

If it’s not corroded then just pull each one out separately with a pair of pliers. If it looks corroded I would buy a can of PB blaster which you can buy at any auto parts store and spray it on the connections and let it sit for an hour

[@gardyfaustin8707]

Hi . How are you . I did step one and 2 . Didn't do step 3 yet ... Question. When I put tge machine on small load . It continues to fill up and dont stop . And overflow Help. I blew and heard the click ... I blew into the hose . Step (2) . Air blew just fine .

[@proclaimliberty2000]

More than likely your water inlet valve needs to be replaced.

[@gardyfaustin8707]

@@proclaimliberty2000 thanks . Will do

[@proclaimliberty2000]

@@gardyfaustin8707 👍😊

[@ravishinghunk2671]

@@gardyfaustin8707 I have the exact same issue.. I put on small load and it never stops filling. I did step 1 and 2 just like you did.. Did you get yours fixed?? Was it the water inlet valve? I need to know lol...

[@gardyfaustin8707]

@@ravishinghunk2671 I fixed it myself . It wasn't the inlet valve . If you open the front cover , you will see 2 tubes or one tube , one will be disconnected. All the way at the bottom on the left side or right side . Connect that tube back . And pleae let me know if that solved your issue . Thanks

[@RogueIntel]

Hey! Are you Saul Goodman?

[@Grace-pu9je]

What if its a slow drip from hot and cold?

[@proclaimliberty2000]

You probably just need to replace the hoses

[@johnbargholzsr6508]

By the way I went to Liberty elementary School, just saw that in Your Your Name of Your Channel.

[@thenricks5063]

Adding a button for “drain” is too much to ask from these manufacturers I guess

[@1800s]

Exactly

[@waaterski]

I disconnected and blew into the pressure switch hose, the tub has water in it, I hear water bubbling.

[@ShoaibMdShice]

My machine is off but water is continuously filling in the drum. What should I do?

[@proclaimliberty2000]

You more than likely just need a new water inlet valve.

[@ShoaibMdShice]

@@proclaimliberty2000 Thank you a lot.

[@spicky2966]

kzbin.info/www/bejne/in-pkmqXiMt7nbc

[@ShoaibMdShice]

@@spicky2966 Thank you!

[@spicky2966]

@@ShoaibMdShice we need to repair these instead of buying new

[@MeekoRuiz]

1980 washer machine

[@Phantom096]

They say the old ones are the best. They don’t make them like that anymore.

[@bookwriter4438]

You sound like Saul Goodman

[@MikesHobbyPlanet]

Lol your right

[@JessSkubi]

Do I really gotta put my mouth on it!? 😳

[@bigbobwag]

Blow on it :)

[@nealschaffer6587]

Hsjta