Production of syngas from plastic (Pyrolysis-Combustion-Gasifier) | Aspen Plus V11.0 | Simulation

[@彭彭-p7r]

Can you please attach the link of research paper from where you have taken the data?

[@sonaliajaysingh659]

Hi sir, could you please share the simulation

[@hassaanahmedkhan5854]

Would u tell me what stuff is to be changed when petroleum coke is used as a precursor.

[@pmfitline_yeongrok]

Why my Ryield reactor have a warning? The messeages is " SPECIFIED YIELDS HAVE BEEN NORMALIZED BY A FACTOR OF (0.692524) TO MAINTAIN AN OVERALL MATERIAL BALANCE." And How do calculate the yield? I want to know the reference this modeling. thank you sir.

[@AGMONLINESIMULATION]

Yeah im rectify your issue ..... video i made in yt is already ..... to fix ur simulation issue i ask my service fee.

[@AGMONLINESIMULATION]

If you dont want to take service ots upto you. Goodluck and by the way university charges you fee to teach you so same thing YT its free and if you need my service i charge

[@nazmussakibkhan8135]

Hi in the combustion sections in reaction temperature approach at 9.40 mins....while writing the reactions we need to input a temperature is it same temperature 900°c for C+0.5O2=CO2 and others

[@AGMONLINESIMULATION]

Yes its for temp approach

[@noelmontero4698]

Hello from Spain. I would like to know how did you get the stoichiometry coefficient for water in the drier. Thanks in advance.

[@AGMONLINESIMULATION]

See in drier my main purpose was to remove water content so then calculate it by remove and then calculate the other coefficient

[@noelmontero4698]

@@AGMONLINESIMULATION Thank you very much. Another question: Could you tell me which are the split fractions for SEP-2 (Sep type) or if you chose a Flash2 type?

[@thelittlemouse95]

hi, do you have a step by step video for the part from min 9.40 min? in the rgibbs reactors, in the restricted equilibrium section, when you input the chemical reactions you have to input the temperature approach for every reaction. what values of temperature approach did you use for every reaction in both rgibbs reactors?

[@AGMONLINESIMULATION]

Sure can make it. Kindly contact on my WhatsApp [phone]

[@彭彭-p7r]

@@AGMONLINESIMULATION would you mind sharing temp approach of gibbs ???

[@彭彭-p7r]

@@AGMONLINESIMULATION i havent use whatsapp sir !!

[@AGMONLINESIMULATION]

Contact me through telegram with the same number or through email

[@nashiffuadkhan9817]

at 5mins where did you get that coefficient for water removal??

[@AGMONLINESIMULATION]

You can see in property package that the percentage of water that is inside the feed..... so assumed that 100% water is removed at that stage. So coefficient is calculated based on it. Hope i have answered your question

[@apaoeir]

Hi, Great video, thank you! I would like to reproduce your simulation and would like to know how you created the custom PET feedstock. Could you recommend a tutorial for guidance? Thank you!

[@AGMONLINESIMULATION]

Hi, Custom PET or any other non-conventional component can be define as i have defined in the video just only values will be different if you need i can make a separate video or tutorial on how to do it

[@monakhamisi3555]

hi how do you select the numbers of yield basis in ryield of pyrolyzier

[@AGMONLINESIMULATION]

Based on the calculation that the water is zero so I calculated my yield

[@shaziaali7860]

Hi! Would love to know how do we insert the plastic component into the simulation? Step-by-step guide if possible

[@AGMONLINESIMULATION]

Sure contact me on email or WhatsApp

[@orlandopalone4001]

Can you please provide me with the reference for the composition of the PET? Proxanal, Ultanal etc Thank you

[@AGMONLINESIMULATION]

Contact me on WhatsApp

[@franslombard5070]

Can you do one for benzene production using catalytic reforming

[@AGMONLINESIMULATION]

Sure drop an me message on instagram (AGM ONLINE SIMULATION)

[@uditchoudhary2695]

Steam is also used but conditions not mentioned.

[@AGMONLINESIMULATION]

Operating pressure 1 bar and temperature 25 C

[@uditchoudhary2695]

@@AGMONLINESIMULATION flow rate?

[@uditchoudhary2695]

@@AGMONLINESIMULATION steam flow rate in kg/hr

[@uditchoudhary2695]

@@AGMONLINESIMULATION steam flow rate in kg/hr

[@AGMONLINESIMULATION]

@@uditchoudhary2695 600 kg/hr

[@bhushangoklani3286]

Can you please tell how do we calculate basis of yield

[@AGMONLINESIMULATION]

dividing the moles of the product between the theoretical moles of the product (maximum amount that would result from the product if the entire amount of limiting reagent is consumed in the reaction).

[@renepantoja1476]

Do you have a step by step video of this process?

[@AGMONLINESIMULATION]

Yes i can make it on this process

[@renepantoja1476]

@@AGMONLINESIMULATION Thank You!

[@AGMONLINESIMULATION]

Contact me on WhatsApp [phone]

[@saniaishtiaq5989]

can you please run this simulation step by step..

[@AGMONLINESIMULATION]

Okay in further video will run simulation step by step