Professional Pressure Washing: Soft Wash Process With A Pressure Washer

[@Critterc100adc1]

Just getting into soft washing and I agree that so many of these videos are over complicated with too much talking. Your presentation was simple and to the point. It was perfect! Thx from Old Man & a Pressure Washer LLC

[@kylestead6657]

Awesome presentation on soft wash. This is demonstrated better than any other video I've seen on KZbin. Thank you for explaining the nozzle tips

[@EduardoDasher]

True bro

[@flavioguzman8443]

I have watch this video like 20 times, it help me a lot, thank you

[@deadpool_exe2614]

What tips do you use and where do u get them?

[@dameronlyon6740]

Very well done!This is my exact procedure.Apply soap from bottom up and rinse from top down.The jrod was a game changer for me along with a downstream injector and a good surfactant!You are lso representing NC very nicely!Maybe see u guys on a job one day soon!!

[@alexhunter6141]

Can you explain the difference between soft washing and downstreaming? I haven't been able to find much online. From what I understand softwashing pulls directly from the chemical/water supply. Where downstreaming mixes it as a ratio about 10:1? If I am correct please let me know. Then explain how the setup is different. Thank you.

[@dameronlyon6740]

@@alexhunter6141 only real diffrence is pressure.Pressure washing is really for concrete,metal etc.Soft washing is better cause it wont damage the vynal.Several ways to do either but pressure is the diffrence

[@alexhunter6141]

@@dameronlyon6740 Yes thank you. But I am familiar with what softwashing is. But am confused of how the setup is different then downstreaming. Where downstreaming automatically applies a ratio and mixes the chem and water normally 10:1. Where softwashing just pulls directly from the source and sprays it.

[@dameronlyon6740]

@@alexhunter6141 you can softwash with a downstream injector(that's what I do)just buy a JROD that way you are using volume of water instead of pressure of water if that helps?U can also use concentrate and a dedicated pump(4-6gpm),but it's not necessary,and just another expense when if used wisely the pressure washer will do the exact same thing..Just figure out your ratios and you may have to find a way to do roofs due to not strong enough concentrate,but that would be the only real need for a dedicated pump.

[@cmtechservicewindsor]

Great video! Thanks for being detailed with your explinations.

[@JoeJoe-wp1vv]

I been watching alot of different videos on how to do this, and I learn something new from every vid, I think I'm ready, thank🤘

[@rigo62982]

Need a license to use chemicals..

[@nihga67890]

@@rigo62982 who says he doesn’t? Hater.

[@Jmlfraz724]

@@rigo62982 really?

[@dameronlyon6740]

You dont need a license to use s.h. or surfactant if you did nobody would be allowed to wash clothes without a license

[@papaidolatrine2499]

@@dameronlyon6740 I’m new lol what’s SH

[@wishiknew1974]

This worked great with my Honda 2600 psi Pressure washer kzbin.infoUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP , it came with two different size adapters, and tread tape so you're ready to go. I used it on my sidewalk that was getting dark and it worked great with no sprayer streaks. Just back and forth, really easy and way better than the spray adapters that came with my Pressure washer.

[@ChappellPressureWashing.]

Awesome video and the presentation was very helpful.

[@daltondamico2985]

could you put a link in the comments on where to buy your low pressure tips

[@franklinchavez8429]

Amazing job SOFT washer with pressure washer equipment Nice job

[@bol.8749]

Nice shirts, I hate the gawdy crazy ones some of these companies wear.

[@s-dot-six2327]

Some of them look like nascar racing

[@angelespinosa8365]

Thank you for explaining the J-Rod!!

[@BitcoinCryptoNews]

Thank you very much for this video. Answered a ton of questions I had. Thanks again, cheers!

[@Reno-pz3kt]

Awesome video bro, when you switch to the green tip, does it shut off the soap from coming through??

[@Hawktgk]

Good job much appreciated!!! Where can I buy those tips? Also can I use it in my craftsman 3000 psi pressure washer as a softwash alternative?

[@lorenzo-zovr]

How did you switch from spraying solution to rinse? Did you use the same hose?

[@MK-xb4ws]

What cleaning solution do you use on the houses?

[@Joey-id3rk]

sodium hypochlorite and water

[@MrFdt44]

How do you change from chemical to straight water without bioinformatics back and forth from the tanks , would you do a demo on that and what bio friendly chem is good for not killing plants and bushes thank you for any help, I’m trying to learn to do my house and parents home with a new pressure washer

[@renostubbs8504]

Nice technique bro, what is the mix ratio with your solutions???

[@vincentcappello4746]

My biggest question is what chemicals are being used? There seem to be so many different chemicals for different applications.

[@jax3643]

Make sure you never spray water up into a vent like that, the water will create moister in the attic insulation and cause mold. Arc your spray to come in from the top and it will rinse down.

[@BobbyVanStone]

quick question cause I'm brand new to this, but when you rinse at the end are you still using the solution or water only? I didn't see you make any change to the gun before you started rinsing besides just the nozzle

[@theman6910]

I noticed that also... But I heard some where that when you use the higher volume tips it doesnt create enough pressure through the hose to draw out the solution.

[@bryanpuetz2047]

Yes you definitely explain this just as good as any top pro would I appreciate that I have a question do you Squeegee the windows afterwards?

[@orlandovega6958]

What solution or soap do you use? Appreciate the feed back brother

[@mckyebramblett8494]

When he switches to the rinse nozzle, isn’t it still spraying chemical?

[@geneduclos4003]

Great video. Camera man needs some practice on keeping the camera where you're spraying. Thanks for the video.

[@captaincake4331]

How are you switching from the chemical to just plain rinsing with the same hose?

[@moreheadantonio21]

Great Demonstration excellent work

[@TerryJohnson757]

Great Video. Where do you buy the tips you were using?

[@planetfabulous5833]

I could watch him using his big wand all day long!

[@foreignercatracho]

Awesome thanks for Sharing your knowledge. Can you share the tip info please I would like to buy it

[@nightshade9977]

THANK YOU for looking so professional.

[@EricGonzales-gn7yu]

can it be used on a stucco house?

[@noahstewart3694]

So basically all you need is a downstream injectior is that correct

[@copper771]

So when you switch to the rinse tip, the chemicals won’t come out?

[@ryanlamarche3764]

What are using for a pressure washer?

[@waynegartman3507]

what cleaner did you use. And great job on this video

[@williamgary7891]

I noticed he didn't use protection do you recommend protection

[@kennethcouch4388]

What type of Solution do you use for vinyl siding?

[@cardinalprosoftwash]

Excellent video! Seems a few KZbin'ers over complicate the process and make it seem like rocket science. Thanks

[@Trd2020]

Great video

[@4everabeast79]

Where can you purchase that tip from?

[@krisneyts2697]

Hi, nice video, Thanks. I want to do this myself, can you tell me which machine you use to spray, and how you mix the products you use with the water? Do you use a compressor? Thanks in advance, Kris

[@spacecoastbonsai1421]

Do I need a soft wash system with a pump in order to use a jrod. Sorry I’m confused. Noob here.

[@dannyheise1697]

How do u reach thr top of the house from thr ground if ur washer just that powerful or is it a certain nozzle

[@MrFdt44]

What pressure are you running

[@StormJunkies]

What downstream injector are you using?

[@mr.doitall]

The x jet is pretty legit. Unless you have a huge set up. You could also use the downstream on your power washer if your machine has that. I prefer the x jet just so I can prolong the use of the pump on my pressure washer.

[@kyleyoung8719]

Thanks for sharing

[@Reno-pz3kt]

You down streaming,right??

[@saraho5467]

I need to know if I am at risk of damaging plants with a 2-3% mix. I’m assuming with pre soaking everything I should be fine. I just notice in all of these videos everyone is soaking the plants with their mist. I’m just curious if I need to take extra precautions other than just pre soaking.

[@isaiahgraham9882]

At 2-3% mix you could possibly cause damage to the plants. At about a 0.75% mix you’re causing little risk to the plants, any mix hotter than that, I’d suggest soaking the plants with water beforehand so they’re not soaking up chemical.

[@richardgorham2448]

Can you use a regular lowes pressure washer with that soft wash tip?

[@alconyers2003]

Mike Bell you don’t need flow. Or pressure. If u got strong enough bleach u can do it with a pump up garden sprayer and rinse with water hose. You are letting the chemicals do all the work.

[@alconyers2003]

Mike Bell hey silly lil boy. A 2400 psi washer with 2.5 gpm will shoot chemicals 2 stories. But the question never mentioned climbing a ladder or anything about how high the house or whatever was. The answer is yes lowes pressure washers will work.

[@alconyers2003]

Mike Bell why are you being a jackass. The same way you felt the need to get smart at my comment. Can you take time to answer the other questions or u just like being a fucktard?

[@DirtKillerNI]

alconyers2003 how do you get the chemical mixed with the pressure washer? SH kills the pump, detergent hose does’nt make a strong mixture. How do you use it???

[@danielmilner8946]

Zoltán Gerber downstream after the pump

[@WH1TEDEVIL]

Do you incorporate soap or you run straight clorine. Ive ran the clorine but it tends to burn plants if i dont rinse it really well. Thanks

[@dondutra17]

What is the wand you are using?

[@rmbrikha]

Where did you purchase your 👕

[@Methodical2]

Nice tutorial. Amazingly, I still see folks on ladders trying to clean houses with high pressured water.

[@dameronlyon6740]

I did it that way before I found a better way.When I used to paint it was how I was taught to wash homes.This way is much better though

[@jamiewright1978]

What is the name of tip n where can I buy

[@firefighter326]

Ever have water make it past the window seals?

[@joshuaday3994]

What brand wash tip are you using? Looking to get one of those for myself 👍

[@MrCutLawnCare]

www.powerwash.com/jrod-kit-for-5-6-gpm.html?Shopping+Ads+Feed&Google+Shopping+&gclid=Cj0KCQiAhojzBRC3ARIsAGtNtHXenYNqZOwWIGhhCpPrLtI18Bp6qYOT1McsMS71l8AcmRZzyi46wX4aAjaYEALw_wcB They are J-Rods

[@markpickering4985]

Hi are you running chemical through that pressure ?how is your mixing process or set on your rig?

[@falcon4jbhs]

What soap are you using. Thank you

[@robertwooten30]

What are the numbers on the tips?Thanks

[@anextday]

What gpm does that machine puts out

[@jamiewright1978]

Where can I find this tip

[@shanecastillo7830]

So i use this tip for Soap Application of Detergent Clean Pro Exteriors Pressure Washing & Roof Cleaning?

[@EssentialTouch]

Great video! Where do you get your shirts from? Thanks

[@ryanwebb8845]

What size soft wash tips are you using? I see 2 chemical tips and 2 wash tips

[@tonybarbieri4178]

Awesome video Nice job

[@buboylabador8830]

Buboy here from the Philippines, i have this AR ( Annovi Reververi) 2200 psi pressure washer, what washer tip for rinsing will you recommend?

[@buboylabador8830]

My washer discharges 2gpm

[@chrishhernandez4946]

Where did you get the nozzle like that? You make it?

[@truthoverall]

It's a J Rod, they're on Amazon

[@sammyzonna8045]

Very professional

[@justanotheryoutube1677]

What is the nozzle piece called?

[@justinwhidby1443]

What GPM pressure washer are you useing

[@angellopez7749]

What amount of SH and water did you used?

[@mikebuggs904]

What gallons per minute is your machine

[@deandremason2457]

So certain tips on the Jrod prevent the soapy bleach solution to pass through?

[@bencantu5218]

2 are for rinse 2 are for soap

[@CHIBA280CRV]

Hey can you tell me the sizes of the nozzles ? Thank you

[@ciphercode2298]

I dont remember the sizes of the tips orifices, but it's called a j rod. You can look em up online

[@bma4203]

I can’t believe that the bleach being used doesn’t stain any near by fabrics chairs ect ?? U use bleach and water right ? What u spray on wood and vinyl fences ?? Same thing ?

[@stevesteve4383]

You flooded the attic vent!

[@johndooley8078]

How do you hit the wall just below the vent without getting any in the vent?

[@johnniealvin3740]

What is the tips names

[@Gibbyoutdoors]

What kind of chemicals do you use

[@iShineCincy]

You used your pressure washer with the j rod? Not a soft wash system? You apply your cleaner (bleach) let it dwell and then rinse correct

[@aog6556]

correct. It can still be called a soft wash system because it use almost no pressure.

[@sportspokerguy3506]

@@aog6556 how do you make a pressure washer use low pressure? I’m extremely confused this is the third video I’ve watched on this topic

[@aog6556]

@@sportspokerguy3506 you basically have to use chemicals (natural bleach, forgot the name) and then you use you’re wand with the lowest pressure tip (white).

[@sportspokerguy3506]

@@aog6556 and that pressure is low enough it won’t damage siding even though it’s coming out of a pressure washer rated for 3600 psi?

[@aog6556]

@@sportspokerguy3506 correct

[@wicked1rish]

whats your psi for low pressure washing vinal? Also, why type of cleaning solution do u use?

[@fun2beliam121]

you want to use low psi. get tips that have a bigger opening

[@ciphercode2298]

Use your pressure washer as normal,but with that jrod tip

[@dereks6458]

Why spray the windows only thing?

[@evisiontv7772]

i have one question when soft washing do you mess with the unloader for low pressure or is there no need for that if you have the j rod ?

[@ciphercode2298]

No need to adjust it. It lowers the pressure via larger orifices. It cuts the pressure by increasing the volume allowed out the tip.

[@IOMTT2024]

Great video. Are your shirts bleach proof?

[@Igor-q3f]

What do do on tall stucco chimney or stucco walls?

[@kyleforbes2981]

Same process on stucco. Low pressure but may require a stronger mix

[@robertleparulo672]

How are you getting the cleaning solution to shoot so high. Is the pressure washer doing this or so you have a booster pump of some sort?

[@aog6556]

it’s the high soap nozzle on the jrod

[@PumpkinFatBoy]

How do you adjust the psi for this application so you don’t blow a hole in the siding

[@wishwashpressurecleaningll3976]

If you notice he uses the j rod. The orifice size used automatically drops the psi.

[@tonybarbieri4178]

What is the name of the For peace that you use at the end of your spray gun Hey notice you are change them time to time is during name for that piece

[@ciphercode2298]

Jrod

[@tommyazar]

Where did you get those polyester polos from?

[@pauldickson-jg8ds]

What chemical are you using?

[@benthompson8450]

Where did you get that multi tip for soft washing?

[@NextGenNow]

You can get them from a company called PressureTek.

[@XOneStarX]

Are you using hot water?

[@joshuah.9687]

Where does one get the low pressure nozzles he's using? I have found the 4 nozzle holder, but I can't find any of those he's using here. Thanks

[@stokeslife2879]

It’s called a jrod

[@reviveservices5273]

Thanks so much for this video

[@NELSONG12]

Good info. Thank you

[@Trd2020]

Do you clean the windows? Example dry them out. Or do you leave everything wet

[@isaacfranco9216]

He's a pressure washer not a window cleaner Jajah

[@nick32141]

OK that’s fine but how are you rinsing without running back to the truck and pulling the hose out of the SH? So that you’re rinsing with low pressure technically soft washing. You’re down streaming you’re not soft washing

[@mik19mazz]

Wish he said what the cleaner was, (name brand)

[@danielmilner8946]

SH

[@ciphercode2298]

Most pros use sodium hypochlorite 10%

[@mik19mazz]

@@ciphercode2298 thank you