Toyota forklift fault no gears! Fault finding struggle

[@andyk1693]

On the Toyota forklift you should find a switch just under the accelerator pedal that cuts drive. Common problem, sticking switch or broken wire in the loom that goes to it. Give us a call at Leicestershire Forklifts next time your struggling, always here for advice.

[@Professional-struggler]

Thanks Andy I will mate…. Didn’t know where to look first on this one pal, a bit of advice gos a long way! I’ll speak to you soon no doubt 😂😂👍

[@joepacheco4038]

What switch??? IC series fly by wire for acceleration not drive circuit.

[@kevinwalls19]

Hi Andy I have a hyster H2 50 XL 1988 model that has just done the same she will select reverse and go anywhere in reverse but won't go forward she will go a bit when cold but not a hope when going up hill or warm any ideas or knowledge would be very much appreciated

[@joaosaraiva8386]

Thank you 🫶

[@charlesharrison3032]

Had that problem with a similar Toyota, unfortunately in searching for it we removed the gearbox cover and stripped it down.now it takes a good rev to get it moving inany direction,resulting in an jerky drive. I SUSPECT INCORRECT ASSEMBLY.

[@125sm3]

The A Team sorted out the struggle for the forklift . Nice one guys .

[@davidmurray6389]

No thank you, another classic from the professional struggler. Excellent video from father and son.

[@Professional-struggler]

Thanks David 😊😊

[@johnwelburn9966]

Great outcome with the forklift another inexpensive repair take care John.

[@Professional-struggler]

That’s what we like John 👍👍

[@mattjones7200]

Excellent 👍 Happy camping ⛺️

[@DuffyGavin40]

Love the videos and you're a genuine guy and an awesome DAD 😁

[@DaveGreeneramblingcarpenter]

Well done boys 👍🏿👍🏿 another happy customer

[@scotthakes6440]

yet another classic 5 stars great video

[@karldickinson2799]

Good as always mate nice to see u with your son he will be a worker like you when he is older

[@dannyhogi4953]

Funny man is back spot on has all ways

[@vinniebullterrier6456]

Whoop whoop, just what i need on a Sunday evening!! Whoop whoop

[@Professional-struggler]

Woop woop 😆👍👍

[@vinniebullterrier6456]

@@Professional-struggler your a legend mate absolutely love your videos, way better than any T.V program without a doubt .

[@Stopsstalkingbro]

Quite a cleaver fix soldering that live across, I really enjoyed this content great to see young archie struggling along with his dad.

[@bostedtap8399]

Great diagnosis and repair A team. ✔. Thanks for sharing.

[@Professional-struggler]

Cheers John 😊👍

[@user-rw2um8ro2p]

Great video Chris you can fix anything

[@Professional-struggler]

😆 and struggle like hell in the process 😂

[@jeffpayne5922]

Good job 👍

[@midlandt4249]

Bloody good show old bean!!

[@Professional-struggler]

What a good show!!! 🧐🤠🤠

[@maffil356]

I learnt this little trick when soldering but I think its down to the copper having some sort of coating, It happens a lot with certain wires (headphones etc) but if you use a lighter on them before they should tin pretty well ;)

[@keepitrc]

Check the hand brake switch mate

[@garysides636]

Good evening , what a nice way to round off a weekend with a little bit of "forklift struggle" ... I , as per , love the investigation and the little workarounds! I'd be lost mate .....I just about cope with two laces nevermind a rainbow filled set of wires coming from all angles. Look forward to sharing more struggles this week mate ! Take care , be safe 🦉🙏 G

[@Professional-struggler]

Thanks Gary! I was a bit puzzled on this one mate…. We struggled through 😂😂you to mate have a good week 👍

[@Blandy929]

Usually when the problems at the stalk you can sand the contacts but this isnt always a permanent fix. I believe the contact bridged out may have been part of the neutral start circuit.

[@philglover2973]

Awesome video thanks for your time and consideration top job top team thanks again struggler 🛠️🔧🛠️🚛🚜🚛🚜🚜

[@012454000]

Hi Chris , I think you may have just bypassed some safety device on that forklift drive selector !🙈, maybe it has a switch under the seat or seatbelt switch that stops you selecting drive whilst off the vehicle! Might need investigating further 👍great videos by the way

[@anthonygrant317]

Was thinking the same, not a fix if what you fixed wasn't found broke.

[@johnmoloney5296]

Just scrape off the coating with a Stanley knife first Chris, scrape a wire until you get a nice shiny copper, then get yourself some flux ( no clean is preferable for wiring as water washable will cause corrosion and another struggle) same with solder make sure it's no clean

[@chox2001]

Archie has the enthusiasm to keep the struggler going. Top video it’s a scam how stuff stops working because it’s way too complicated.

[@peterdyer477]

hello chris hope all is good with you .

[@StarshipTrooper254]

Well done fix it team, You rock :)

[@Davidthomasv8]

Great to see u Chris mate

[@Professional-struggler]

Cheers David 👍

[@MrZimmaframe]

Hey Chris i dunno if you know but Lidl have some 20v tools in this week and one of them is a 20v soldering iron that runs off the Parkside 20v batteries and it's really good, I would recommend one, great for on site soldering without the need for a power source.

[@keithhilton1564]

So good i watched it twice.

[@philhuggett4776]

Flux is your friend when soldering and clean copper

[@Mathewsmith343]

Best on KZbin 🙏

[@mjk8710]

Hey chris just think how many times that selector has been put in forward and reverse no wonder it’s contacts are fubared!

[@phillipgwynne6580]

Slightly going off topic, but in a lot of recent videos that you’ve done, you mention relays quite a lot. And when I was trying to figure out why my air con wasn’t working on my Honda Civic, a lot of guys said to pull the relay out and shake it, if it rattles then it’s no good. Mine was ok, the air con needed re-gassing, so can’t say if this is reliable, hopefully someone on here may know. Great video, and well done to you both for the good work!

[@skaterguy52]

Yes boys 👍 bloody good show

[@Professional-struggler]

🧐🧐👌😂

[@ManxAndy]

Top job sussing that one out Chris 👍🇮🇲💪

[@nushooz6731]

Brilliant 👏

[@garrybeard7718]

Another fantastic struggle job done well done guys stay safe the Allan family. 👍🍺🌹🤣

[@charlesharrison3032]

Good stuff,just done the same on a toyota😅

[@reytech1786]

Amazing video ❤❤❤

[@markfoden765]

Hi Chris,great vlog and young archive is the struggling future 🤣great job on solving the problem but that guy in the yellow jacket(Rob I think) he seems pretty knowable so maybe you need to take him on😬loving the vlogs and also nice to see people in the comments helping out👌👌have a good day guys👍

[@AlexanderSmith21]

I thought archie might end up picking up the ferret because if it knows you have food for it the ferret is there

[@theteadrinker-143]

Well done Sherlock ! 👍🏻😂😂

[@Davidthomasv8]

Brilliant Chris u and young arch are like the a team I wonder what arch will do when he is older ????

[@Professional-struggler]

Hope fully not struggle as much as his old man David 😆👍 thanks mate

[@colinmaynard2879]

Health and Safety Officer! 😱

[@gowithbazza]

Is this the professional stragglers son 😉😅

[@AjantaRadiators]

We Manufacture Radiator for all types of Forklift, Aluminium and Copper Brass. We have Toyota Forklift Radiator available in Stock

[@Georgiee.and.Dan.]

What a treat how are you pal 👍👍👍👍

[@Professional-struggler]

Good Dan thanks! Had the old sicknesses and 💩 yesterday mate 😆 feeling better today though mate! Hope you had a good weekend pal

[@Georgiee.and.Dan.]

@@Professional-struggler that’s no good mate😷🤢 yeh I’m sound cheers pal weekend full of working on cars and got camper van to mot tomorrow🤪😜

[@Professional-struggler]

@@Georgiee.and.Dan. oh sounds nice mate that 😆 hope it’s a new ish one

[@Georgiee.and.Dan.]

@@Professional-struggler 2004 like brand new in side it’s the underneath I’m worried about 🤔

[@michaelcoffey8008]

A switch on the handbrake may cut power to drive

[@dannyphillips8280]

We had same fault on our toyota the reverse beeper is on a seperate circuit. It was the forward reverse selenoid. And the little rubber thing with two wires going in to gearbox twist it about and it seemed to sort it.

[@bhaibhaicarringcenter495]

hlw bro....same problem my forklift -toyota 3fd50 5ton.. Not forward or reverse... Plzzz help, 😢

[@almaxx9680]

Any how, yep you are 👍🤣🤣 And we love it 👍

[@Professional-struggler]

😂😂 cheers AL woop woop 🙌

[@brentsmith5647]

Brilliant man

[@Professional-struggler]

Cheers Brent

[@rustynail4676]

Arch will make a fine hand someday with his early start

[@mrjob-oz4ex]

It was 9 out of 10 good video

[@stevencoyne4971]

Chris &Son 👍👍👍👍

[@davidcornwell9820]

Need to meet up sometime soon so I can give some hydraquip bits so you can show them off on your channel

[@mondodaftasabrush]

Blew to bits..? New switch on order. Don't forget the hub whilst your there

[@Professional-struggler]

😆 Done it mate 3G

[@waynelewes7817]

Like the old days bringing the lad to get his hands dirty and pick up the knowledge of the old fella 😜 shame you dont see it much now!

[@Chris-jy3dm]

The struggle busters 😂😂👍👍👌

[@keithk1246]

Is that machine now starting in gear? You could have bypassed the safety start switch!

[@dangolden7200]

Although successful, don't just rely on your bodging. Order a new switch relay.

[@bhaibhaicarringcenter495]

hlw bro....same problem my forklift -toyota 3fd50 5ton.. Not forward or reverse... Plzzz help, 😢

[@roland8652]

Fab 😀

[@microwave-vh2uc]

Kid no seatbelt in van. Kid driving forklift...great example of what not to do..

[@DavidMaxwell-e8b]

Chris mate I want some stickers for our motocross van where can I get some mate please

[@IdowuTaiwo-u9b]

Hello

[@dannyboihenson]

Get back do d&js the place is falling apart this week lol

[@mrjob-oz4ex]

Did you fixed the A/C on it

[@andrewmawson6897]

You will now not have creep feed with the accelerator switch linked out

[@clayton9136]

" I don't really know what's going on" about sums up this absolute joke of a video.

[@brianfatchett7287]

hello m8 did i no the dandj had to had is dog put to sleep m8 it very upseting

[@Professional-struggler]

Oww no mate didn’t know ☹️ cheers for letting me know Brian 👍 sad times

[@brianfatchett7287]

@@Professional-struggler u very welcome m8

[@Office-FathomSeafood]

bro just show the forklift repair

[@joepacheco4038]

Are you serious or just a put on for views. Need some serious troubleshooting training. First need wiring schematic and VOM. Should be able to check voltage at seat and p brake switch then at trans solenoid. Not rocket science . Back up alarm possibly on separate circuit in control switch.

[@Professional-struggler]

Make a you tube on it 👍

[@Professional-struggler]

Normal people don’t know everything! We have to fault find and struggle and learn as we go on! Your obviously a very clever person

[@joepacheco4038]

@@Professional-struggler not really just don't enjoy guessing and patch repairs. As a retired Toyota, Cat, Clark you name it road service mechanic for 40 plus years nothing worse haveing to repair a machine that was " repaired " improperly . Makes it harder to troubleshoot. There are a lot of safety features built in to Toyota lift trucks and to override makes no sense you leave yourself open to legal problems if someone gets hurt. Believe me I've seen them . Stay safe .