Programming 101 with "Uncle Bob"

Light Switched Source Code: github.com/cleancoders/P101-L...
To see more about Clean Coders:
cleancoders.com/
Welcome to Programming 101. This is a video series for those of you who are wondering whether you want to learn how to program computers. This series will teach you that skill.
But this series will do something else. This series will convince you, early on, whether or not programming computers is something you want to do. By the time you are done with this first episode, you will know.
In this episode we cover a lot of ground. We introduce the structure of computers, touch on the basics of logic, add a smidgen of binary math, and just a skosh of the Java programming language. But more importantly, we use that knowledge to solve a typical programming problem. A normal, everyday, common problem: turning on the lights. That's right, we solve the problem of light switches.
#CleanCoders

[@casperes0912]

Is it just me, or does it seem like there are an awful lot of relatively experienced programmers, like myself, on a video titled Programming 101?

[@nightmaster552]

its because we strive to improve and see if we "looked over" something.

[@jimo9555]

for the same reason that even top sportsmen, like Tiger Woods, still need coaches

[@dietergrawe1187]

it´s because I like to listen to Uncle Bob regardless to my 35 years professional software developer experirence

[@sillyultroid]

learning is fun to us

[@klc3rd]

Casper S� lol I thought the same thing after I over eagerly said “Oh! I know what to do”

[@casperes0912]

I never quite realised how insane good auld Bob actually is. He'd make a great super-villain. And he edits video like someone who just found out iMovie exists... And I love him

[@rabbet6972]

i love how the first several minutes is just uncle bob flexing his house and cars haha

[@dewdop]

I think it's annoying...

[@Filaxsan]

@@dewdop I think it's just uncle Bob being himself (and awesome) as usual.

[@RogerBarraud]

@@dewdop Tough ;-)

[@dewdop]

@@RogerBarraud Sure is. I've lost a lot of sleep over it, actually.

[@quentindaniels7460]

Lol, I was thinking same thing. The man worked damn hard for it

[@shiweiqin7846]

“If the didn’t pay us to write the code, we pay to write the code” LOL, true

[@jaydjeffries]

wish I had this guy as my professor way back when better late than never

[@haimgrn]

I've never believed that such simple and obvious talks are really needed, until I had the opportunity to work for a company where this was the way they wrote code, with an extreme avoidance of almost any abstraction... So it really is good that we have such videos explaining the very basics of good programming practices.

[@prezadent1]

I've been programming Kotlin for over 20 years and wasn't aware of the 'if' keyword. This changes everything.

[@raymondmartin2416]

Must also be amazing to code in a language for 20 years that has only existed for 10 years max.

[@First_Principals]

@@raymondmartin2416 That's why they call him an expert :-)

[@MariaBethaniaCabrera]

What an awesome teacher! I'm still waiting for the second video of "Programming 101 with "Uncle Bob" ". I wanna see more and learn more from you. Please Uncle Bob, continue with this 101 videos. Thanks.

[@acrabtree11]

Had to stop here 30 minutes in and say 'Thank You !!' . Great stuff , as someone going back to school at 38 years old and having had little hands on experience with programming before , this is just the pace I needed to really help me solidify my understanding of basics. 8 years ago, I completed a college course as a personal elective in Computer Logic and Programming and while I was offered much there none of it really stuck as I didn't continue my studies and only took that and a basic Microsoft Office course and wasn't super interested. .... I greatly appreciate the playfulness in your style of teaching here in this video , just very personal feel and entertaining pace ... I've watched another hour long talk you gave to a group of programmers on clean code - over my head , but I really enjoyed it too. Anyway big thanks !! This video = ( BIG VALUE , LEGACY, JUST GOOD FUN )

[@anonymous.youtuber]

Beautiful how he gets the message across that in the first place the program should implement what the user really needs, not what you think he needs nor what the user thinks he needs.

[@spikeevans1488]

I agree with your statements about loving programming. I have been retired for 7 years and still program my computer nearly every day. Curiously, I remember, when I first started programming back in the late '60s, wondering if it was a good thing to get into as I thought it wouldn't be long before all the programs that were needed would be completed.

[@mikeRumex]

That unmatched “}”.

[@shawnpetros2831]

it's because he's using arduino IDE and is in the loop method, he has the opening brace off screen so as not to confuse/overcomplicate for the more intro crowd

[@makinggreatbread]

Excellent refresher! Thank you Master.

[@MarkLeonTanner]

Your passion helps make you a great teacher... I'm a hobbiest and I want to learn more...

[@danielknight3852]

Excellent. Where’s episode 2?

[@chuckwieser7622]

I don't know either. I looked on his website 'Clean Coder' and did not find it. I hope he continues this series!

[@qu765]

You have to buy it :(

[@omarelkhatib150]

5:51 well said Uncle Bob , well said.

[@danieladetayo3711]

Thank you so much uncle Bob. This is what I've been missing all my life. As someone who didn't study computer science, this has been really helpful. I'm going to spend the next few weeks consuming all related content.

[@sobreinquisidor]

I'm a profesional programmer I have been coding for years now but uncle Bob always teaches something even on basic videos. Thanks I'm a big fan of you :)

[@is4554]

SuperB video. Thank you so much Bob 👍🏻👏🏻🙏🏻

[@Newtube_Channel]

Uncle Bob is a gem. I don't know what they teach in CS 101.

[@justinmean7370]

How is this guy not on the the Nobel Prize list? Thank you Uncle Bob!

[@TranscendentBen]

I saw Pascal in the opening screen and ... well, it was a really good language for its time - I remember when the UCSD Pascal came out on the Apple ][. I did a lot with it. Back to watching ...

[@marekkucak6581]

In the high school we learned to code in Pascal. Best of all was TurboPascal env.

[@ethanjensen7967]

8:47 that's processing!!

[@Seofthwa]

This is a brilliant presentation, I learned more here than I did while attending college. Look at a problem closely, understand it. Since your first solution is probably clunky, go back simplify the solution. The example is excellent, simple and illustrated the information perfectly. Thank you, Bob.

[@jonsplex]

I absolutely adore the cheesy comedy/FX in this video, lol

[@daniel71626]

Great video!

[@BorysMadrawski]

For absolute beginners (something for my daughter), but still I love to watch him. By the way, I have just checked: "finger" in Latin is "digitus" exactly.

[@oliverhughes169]

For beginners, but there's gold here for more experienced programmers that might never have stopped to think about the simple things, or just take them for granted. I had never thought about the && table being the inverse of ||, or vice versa, for example.

[@elkhoukhi]

Greaat introduction! we want more

[@demohub]

Great video. Thanks for sharing.

[@willemvdk4886]

This video is very entertaining and educational at the same time. It's so funny yet all so true.

[@stephenfoster9009]

Is it just me, or was his programming if his first chart opposite of the chart? If the A, B switches were the same, the light should be off. His first code for A, B stated if A and B were the same state the light would be on.

[@nathanwittland8112]

You are correct, he would just have to swap the words On and Off in the code to match the chart.

[@mustafaaljasim7226]

@@nathanwittland8112 I just started to scratch my head when he did that opposite to the chart, but overall good concepts to learn from!

[@TotoLakay]

@@nathanwittland8112 Or just use a ! not to correct the script.

[@mikemcculley]

Pay attention learners. This is how bugs are introduced.

[@raymondmartin2416]

He incorrectly code a XNOR function instead of an XOR.

[@The_Wandering_Nerd]

This definitely makes me appreciate electricians a lot more. They have to lay out these complex logic circuit with just wires and switches. Talk about your bare-metal programming :)

[@SomeDumbRandomUser]

Thats really good! Why ever youtube recommended this to me, since i have that knowledge already... But great video - has captured my attention !

[@jonl316]

Such a great video. Thank you!!

[@pedroveas4751]

Fantastic!

[@dazelmann6589]

Damn, I genuinely lit up when he smirks with his evil thoughts of disintegrating our beliefs

[@TotoLakay]

Holy Shit!!!! This video is better than all the books and classes I have ever taken. Great video... Awesome tutorial...

[@ionution2009]

Wonderfull, in the past I saw programmers'oath, very short videos, but now I didn t find anywhere, maybe have been deleted, but I don t know why, was very interesting videos :(

[@davidmurphy563]

Such a great video, I was rapt from beginning to end. I think Java was a bad choice though. In python there isn't the distraction of obtuse symbols not is not, and is and, or is or. You wouldn't even need a method. Anyway, great stuff. You give a good name to bonkers. :)

[@codenut9638]

LEGEND! Thank you sir

[@mehmetoguzyardimci8598]

Best CS course ever :)

[@williambarrett7108]

I am looking for the rest of this series , but I cannot find anything. I would be willing to buy them if I could find them. I don't have a lot of experience programming but I am interested in learning more about it, and I like the way you approach the subject.

[@Cleancoders]

Additional videos are found at www.cleancoders.com

[@colinmary5883]

Does anyone know where the next episode (which Bob regularly refers to) of 'Programming 101 with "Uncle Bob" ' can be found? I'm hooked!

[@supertenchoo4271]

Brilliant I've learn a lot from this video thank you so much

[@sabuein]

Thank you, Uncle Bob.

[@ruslan-macari]

Great!

[@SlidellRobotics]

The house I owned and lived in 1996-2000, the 3-way light switches had separate top and bottom push buttons, and did not display their state (Cinturon by Leviton). The house had four pairs of such switches. Every encounter with one of these switches was a crap shoot. The "You never have to hunt for the state of the switch" was totally screwed/scrapped.

[@kaanatakan]

I doubt it had anything to do with the brand, they were probably connected incorrectly

[@Stephen-wh7vl]

This is awesome

[@KulaGGin]

You wrote the table at 16:00 and then you went and programmed directly opposite logic in the program. In the real life and in your table on the paper when both switches are up or down, the light is off, but in your program when both switches are up or down, the light is on!

[@galtbarber2640]

In his data table he wrote that up&&up or Down&&down was light off. But what he put in the code was the opposite, with the light on. The dual lightswitch still works, but it was not coded as planned.

[@JokerDenFMR]

Yes, it's making me crazy too.

[@allanmuller3486]

My theory as to why ! is called "bang" is that on the old teletype consoles (like those used to control early computers), the ! symbol was the shifted value of the "B" key.

[@nunosantos2589]

Hello, very nice video, would love to keep seeing them. Just a note, i couldn't find the source code in the site, is it only available if you buy the video? Thanks in advance

[@this-abledtheextravertedhe5299]

Thank you 😊

[@powlsn]

that sound @10:16 is the main theme for german tv commercial break 🤓

[@liviuzachin643]

Wel done uncle Bob. Thanks

[@CarCinCal]

That DEC PiDP-8 12-bit Octal Computer Hobby Emulator / Simulator casually blinking yellow LED lights in the background is the ultimate CS Flex though....

[@lordofelectrons4513]

Good intro for the Nube But I am sticking with old fashion mechanical locks and my analog chickens.

[@michaelclift6849]

The users intent will be relative to the last 'stable' state of the light. (stable meaning the last state which persisted for >500mS). An odd number of flips, intends to reverse the last stable state of the light. An even number of flips, intends to restore the last stable state of the light. I wish such consideration for timing went into web browsers. If I click on something 15mS after a page completely re-arranges itself, it's probably not what I wanted.

[@tsunamio7750]

It's very basic, but it's well made. You got rid of the terminology at first to let kids concentrate on the interesting stuff. That's great!

[@travismoore7849]

What about dividing a problem into modular blocks where you have them move in a loop like a chain. Then the process runs with different sets of data with different inputs to verify that one block of data has moved and changed relative to block data b to make a complete transaction say a change of currency? Where A and B are changed by moving x amount from A to B and verify that said trans action has taken place by a compatitor that makes sure that each has changed by the same amount where A loosed x and B gains X amount and that the change of X is the same but inverse relative to each other.

[@LajosGyorgyMeszaros]

16:35 - XOR light switches 20:04 - XNOR code 36:16 - okay, order is restored, he's coding xor

[@rebeccabretzinger4401]

On the note card it was captured that both up or both down should make the light OFF, not ON. Then he programmed it the other way.

[@MathALCS]

I thought I was the only one noticing that... hahaha

[@michaelclift6849]

That's at least 3 of us.

[@kieransloan]

The only thing I would add at the end of this is to get the audience to think about if you had more switches you wouldn't want to change the code each time a new switch comes along.

[@orlovskyconsultinggbr2849]

Man i wish my company would be a partner of Clean Coders.

[@danielv85]

Really nice :)

[@davidconnelly]

I'm not sure if the incident at 11:28 warranted a laugh of such enormous magnitude.

[@RatFace_MonkeyEar_FishEye]

It scared me lol I was like damn

[@davidconnelly]

@@RatFace_MonkeyEar_FishEye Yeah man, me too. If he did that in a same-room scenario then I'd be jumping out of the window and running for the hills.

[@RamLaska]

Not a coder, but I've dabbled for 30 years. Gotta respect a guy who starts you out with a LIGHT SWITCH.

[@Warpgatez]

Man, if I had the money I'd pay Uncle Bob to be like a Bill Nye the Science guy but for programming. Young kids could benefit so much from him if he had his own show on Netflix or Hulu or something.

[@mistalan]

Absolutely. There is so much left to code for zillions of young people in the future

[@juanc.villegas9111]

This is a GOLD MINE!

[@kupfeli]

So I like these simple explanations, but I am personally missing one point for the switches, which for me is important to understand. If the switches do not have effect on each other, then the light always goes ON when switch A is switched to the UP position and the light always goes OFF, when switch A is switched to the DOWN position. For switch B, the opposite is true. So in that example it is crucial to understand that the actual switching (in real life: physically switching the switch) determines a change in state of the light. The reason I am saying this is because this behavior is what someone might expect only seeing the switches without the wiring. For instance in that scenario: if switch A is switched UP, the light would go ON. Now if switch B is in the UP position and we switch it to the DOWN position, the light turns ON, as we disregard the effect of switch A. As the light was already ON though, we don’t notice the change. So, maybe that explanation would be interesting to add too and afterwards show the part with the wiring, where the logic of the switches interact. To show the program for the independent behavior, you would then say: if the state of a switch changes (goes from UP to DOWN or vice-versa) we either turn the light ON or OFF, depending on how the switch works. This way the logic of both switches completely ignore the logic of the other switch, but they both control the light. So, we have two completely separate inputs that control the same output. Me saying this might sound very silly and straightforward if your brain works very well, but I wanted to say it nonetheless.

[@jonnovaretti]

I m a big fan of Uncle Bob. When do you come to Brazil?

[@krish2nasa]

How about the below pseudocode logic? SwitchStateChange( ) Invert(LightState)

[@katanasteel]

in the beginning uncle bob test the switch and states that if they are different the light would be on. then he implements the opposite....

[@jessejburton]

Haha yeah I noticed that too

[@swallowedinthesea11]

Some people will follow Leonidas to Hades. Some people, like me, will follow Uncle Bob to Hades!

[@incalite]

You know your degree was worth it the moment you realize the switches example is a XOR gate.

[@rbjassoc6]

where do we find the "FourSwitchScenario()" class or type ?? I am getting an error

[@mehmath]

06:14 hahaha!

[@EliCamacho]

Bob just created the most sophisticated smart switch ever. #SmartHomes

[@mazin_0_0]

the best teacher ever

[@kn9ioutom]

I Still Have Not Figured Out All THE Functions Of MY TV REMOTE CONTROL !!!

[@zizlog_sound]

The light code (UP/UP or DOWN/DOWN = ON) is opposite to the real light demo (UP/UP or DOWN/DOWN = OFF) at the beginning of the 101.

[@Rob81k]

both in same position = equals (==) in opposite positions = not equals (!=), which is logically the same as: either one is up (true&false or false&true) = exclusive or (xor)

[@roberttillotson4889]

This is a free lecture on clean coders and I want to get the extas as described, but they don't seem to show anywhere on the site. Can you dd them here or lt me know how to get into them somewhere else?

[@aymanpatel]

Check cleancoders.com/ for various courses on TDD, Clean Code etc by Uncle Bob

[@FloatingSunfish]

I've been programming for several years and have never used xor and xnor. What am I even doing? Lol. 😅

[@richardpaulhall]

I think I used xor once. (I left a comment for my teammates.) I used a Karnough map once to simplify a 17 clause IF statement.

[@superscatboy]

I bet your compiled code has more xors in it than you realise - specifically every time you initialise a value to zero.

[@drewjaqua2905]

He's like the Mr. Wizard of programming

[@WDN35813]

If my CS101 professor teach like uncle Bob, I wouldn't have quit CS.

[@ThomasFaller]

"This whatever it is"

[@mazin_0_0]

the best teacher I ever

[@taistingtheair1368]

This how to drive an electrician nuts, and you thought programming was difficult try wiring this up in your house. True is the default then make it equal to something with the switches - if any switch changes then change the state of the light. Assembly language basics, now we are talking BTW Uncle Bob did we meet in the lunch room while working at a USPS processing building in NH back in the 80's??? You told me you were a laid off C++ programmer.

[@samuellourenco1050]

My self-made function generator doesn't have software in it: it is all dumb hardware. But the software is in the PC that manages it. It was an attempt of mine to escape software, but it didn't work. Anyway, this guy is a genius!

[@danmenz9572]

class FourSwitchScenario implements SwitchScenario { Error message: The nested type FourSwitchScenario cannot hide an enclosing type Using Processing 3.5.4. I'm lost trying to get things working in the code not shown.

[@peristiloperis7789]

OMG! I never imagined I could get smarter by just watching an old man turning lights on and off lol

[@Majora96]

XOR is the same as != (when it comes to booleans)

[@michaelclift6849]

my thoughts too, a != (b != (c != d))

[@stumbling]

Minecraft redstone taught me De Morgan's law.

[@taistingtheair1368]

Gotta love Minecraft logic circuits, try making a keyed door.

[@ancapftw9113]

Now I need a "this will be a FALSE!" Gif for when my Lule Skywalker meme gets used too much.

[@andrewm4894]

The kettlebells!

[@RogerBarraud]

23:16: Left Clause, Right Clause... Yes, Virginia, there is *no* Centre Clause!!11! :'(

[@SlayPlenty]

inverting && and or blew my mind then he did the thing with 3 switches and i had to pause.

[@mmschwarz1213]

Where can you download the Light Switch code? It is not available per the instructions at the end of the video.

[@patrickevans9798]

I couldn't find it either.

[@ravenouself4181]

I will be honest, had You been my teacher in Highschool - I would have grown to love Programming. Instead my teacher just nagged us all the time and gave us super advanced codes that she didn't explain anything about.