Programming a FAAC 868 SLH Garage & Gate Remote Control

Visit our website at www.gateremotes.co.uk/product...
Programming procedure for FAAC 868 SLH garage door or gate remote transmitter
Buy from the extensive range on our website or give us a call on 01302 700771

[@BobSt2006]

Great! I spent 15 minutes using another video, and was able to succeed after 15 second of yours! Thanks a lot!!!

[@sambadran2413]

Thank you 👍🙏solved in few seconds

[@yrh0413]

Thank you so much for the quick guide. I just installed a FAAC 746ER at my residence and your video made it clear and easy to duplicate my master remote 👍

[@davidhale5304]

Excellent instruction video ,after following your procedure less than 60 seconds to set up 2 units.Many thanks.

[@davidallen-butler5860]

Brilliantly simple and it works first time.

[@mjhawkins1990]

Thanks, under 1 min new device activated. Great instructional video, 10/10.

[@cristiancontrario]

Thanks for the help. It works perfectly now.

[@lewismcghee1003]

Thanks! the instructions that the new remote came with were so unclear. you saved me alot of time! thanks

[@walterchiari9665]

Awesome thanks you saved me a lot of time and grief, great Video

[@TonMachielsen]

Thank you for this video. The manual is not very clear. This video is. 👍

[@pavw5508]

That is an amazing! Thanks for the tip folks

[@lindathompson9968]

Thank you, this really helped!

[@sujithreddy694]

Perfectly working you are legend 🎉

[@rodkeg]

Thanks! Will give it a try!

[@joannanerek5879]

Thank you, very good and clear explanation. 5*

[@Zenwork]

Perfect ! Thank you

[@AmandaOakley-su9py]

Thank you so much for your video. It worked!!!!

[@matt_7617]

Thank you 😊

[@xaKristyy]

thanks a lot! :)

[@helenbradford5613]

Followed instructions which were very clear but it didn’t work when I put them together . New remote didn’t flash 3 times but continually

[@mondachewon2873]

Thanks

[@janwolf3152]

We have a residence with 35 bungalows, we have different types of remotes, but copy is impossible. D'ont get 3 flashes by the new remote but but only one? We got 10 to install so help is welkome.

[@audaykhalaf]

We have two drive ways with 2 gates, and three cars for the household. We have 4 of these to operate on the two electric gates; three are in use and one stored as a master copy. Two of the three in use, seem to have stopped working on the second gate. I have tried many times to reprogram them using the 3rd copy, and the master copy to no avail.. The the buttons for the first gate work but not for the second gate. I wonder if there is anything that I can do, or I should just get two new remotes. Thank you in anticipation. Auday

[@PedroAlmeida-zo1so]

it doesnt work on mine.. tried like that several times and in two different remotes that need programing.. what else can i do?

[@waldemarwalczak8561]

will the already programed one be unprogramed

[@AESTHETICZIDDI389]

Great

[@bluefell4134]

perfect

[@paulmcilreavy4115]

Followed instructions as per video and worked for 3 new remotes however another neighbour purchased a remote fob and again followed the same procedures as I had done previously but for some reason the new fob isn’t opening the gates - any ideas?

[@kungfutuber]

Maybe the remote operates at a different frequency? The FAAC remotes as shown in the video have them written on the back, the one in the video being 868mhz.

[@erbilkoska9431]

But what if I only have 1 remote, the old one is broken.

[@hafeezminhas]

Hi, what sort of clone do you recommend for noralsy remote 868-8?

[@w.havlena5114]

Do you have any experience, if it's possible to program this FAAC remote as a "slave" to a Hörmann remote? I mean, they are both operating on the same frequency (868MHz), so I was wondering if that has been done?

[@hova984]

Hey. I have the same remotes and the first step works (both buttons, light flashing) but at the secend step (button opening ramp) the light does not flash repeatedly, just twice and then it shuts off. Do you know what can i do, as it does not duplicate? Many thanks

[@fguerrir]

I have the same problem

[@SimonePGGG]

The receiver should noto be keep pressed but only quick press and after it double click to confirm

[@helenbradford5613]

Can you help please?

[@mattcarle]

Doesn't work for me either. My remote must be faacked.

[@ziddiloffer8232]

Great