Programming a Jandy JEP-R Controller.

[@andybrody]

You’re making some great videos my friend, keep up the good work

[@EliteSwimmingPoolsTV]

Thank you

[@Bhann100]

Trying to figure out how to have the filtration take back over from the cleaner after a manual start? It worked before. I could start the cleaner manually and it would run for two hours then the Filtration would start up automatically. what step am I missing?

[@EliteSwimmingPoolsTV]

Check to make sure when your selecting the cleaner mode that there your inside the normally scheduled program for a auto restart after the cleaner 3hr run. If your selecting cleaner mode and the programmed schedule is completed then the pump will remain off.

[@Avb53]

Can you set time to control a heater?

[@ibrahimcantillo9326]

Great video, I just needed that information

[@EliteSwimmingPoolsTV]

Glad I could help

[@dankelly]

Does the variable speed pump have an automatic mode, or do you have to program it to use anything less than full speed?

[@EliteSwimmingPoolsTV]

No auto mode, all time schedules & speeds must be programmed

[@joancassa5847]

Hello from Colombia. I have problems, When i turn on the circuit breaker the screen appear a message of alarm C03 and then turn off the screen again. What i will should to do. Please, help me

[@mpbailey18]

Wish you had a tripod for your camera! Made me a bit dizzy.... But thank you for the info...very helpful and so much clearer than the manual.

[@EliteSwimmingPoolsTV]

Thanks for watching & commenting. Some of my videos are shot spontaneously. Hope your a subscriber!

[@vicentee2687]

how do I go to speed 5-8 I'm following the directions by pressing menu but nothing happens

[@EliteSwimmingPoolsTV]

This controller does not control speeds 5-8. This is a 2 speed controller. You can only set up a low speed on the eStar button and a Higher Speed for the #2 button. This particular video the customer had a variable speed pump as I assume you do and he can not get all speed settings or full value out of his VS pump. You’ll need better the IQPUMP01 controller which you’ll control they a App from Jandy. Thanks for watching and hope this help. Don’t forget to subscribe.

[@vicentee2687]

@@EliteSwimmingPoolsTV yes sir thank you for responding already subscribed for yrs now

[@EliteSwimmingPoolsTV]

Thanks and appreciate your sub

[@wandabuchen4581]

I need to change the fountain timers...to start in the am and off in the pm. can anyone help me with that? Thanks

[@AYSPDFW]

How l do you turn it on and off manually?

[@EliteSwimmingPoolsTV]

When the pump is ON you’ll find one the the LED light illuminated Red indicating that pump programmed speed selection is On and the other button selection illuminated green indicating that speed selection is Off. When the pump is totally OFF, you’ll find both buttons illuminated Green . Press the button that is illuminated Red and it will shut off the pump. To turn back on, press any of the programmed buttons and it will turn red and turn on pump at that programmed speed.

[@scotsmith7047]

How do I unlock keypad?? It won’t unlock?

[@EliteSwimmingPoolsTV]

Is your keypad password protected? If not, then press #1, Menu, and #4 button all together and hold for a 30 sec to minute and you should get to internal system options

[@oxford821]

@@EliteSwimmingPoolsTV My panel Is running but buttons won’t do anything, panel is displaying “remote activated” ??? Help

[@kaburrows4554]

I set pump off and on time. It won’t turn off at off time

[@EliteSwimmingPoolsTV]

Make sure the Date and current time of day is properly set.

[@felipevargas4960]

How do you unlock keypad

[@EliteSwimmingPoolsTV]

Watch the video again... I demonstrate it

[@bmanh2355]

A lot of crap…

[@EliteSwimmingPoolsTV]

Just like your comment and what comes out of your mouth 💩

[@bmanh2355]

Just for u… and your crappy make me dizzy, ill informed piece of crap video… stick to pool installations

[@EliteSwimmingPoolsTV]

Awe your dizzy?? Who gives a 💩.

[@garystrauss6682]

Always a cry baby in the bunch.

[@bmanh2355]

A lot of crap…

[@EliteSwimmingPoolsTV]

From you